AP Calculus practice problems: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Optimization

Method
write Q(x) with one variable, solve Q′(x) = 0, check Q″ or the endpoints
Maximum
Q′(x) = 0, Q″(x) < 0
Minimum
Q′(x) = 0, Q″(x) > 0
Closed cylinder
V = πr²h, A = 2πr² + 2πrh
Profit
P = R − C, R = p·q, maximum where MR = MC

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (−2x3 + 5x + 7)/(4x3 + 2x + 9).

f(x) = (−2x3 + 5x + 7)/(4x3 + 2x + 9)x → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 ln(1 + x)/sin(5x), with x in radians.

f(x) = ln(1 + x)/sin(5x)x → 0
L =
3.DerivativesMedium
xyx = 0.5

Let f(x) = x·ex. Find f′(0.5).

f(x) = x·exx = 0.5
f′(0.5) =
4.DerivativesHard
xy

Let f(x) = x3 − 6x2 + 6. Find the x-coordinate x of the local minimum.

f(x) = x3 − 6x2 + 6
x =
5.OptimizationMedium
rh

A closed cylindrical can (with a top and a bottom) must hold 1000 cm³. The metal used is proportional to the total surface area. Find the smallest possible surface area A.

V = 1000 cm³
A = cm²
6.OptimizationHard
qP(q)maximum

A small firm sells its product at a fixed market price of €50 per unit. Producing q units costs C(q) = 14400 + 12q + 0.01q² euros. Find the maximum profit P.

p = €50C = 14400 + 12q + 0.01q²
P = €
7.IntegralsMedium
xy02

Evaluate I = ∫02 e−0.5x dx.

f(x) = e−0.5x[0, 2]
I =
8.IntegralsHard
xy−33

Find the area A of the region between the parabola y = 9 − x² and the x-axis.

y = 9 − x²
A =
9.Differential equationsMedium
tyy(0) = 4y(1) = ?

Solve y″ + 5y′ + 4y = 0 with y(0) = 4 and y′(0) = 1. Find y(1).

y″ + 5y′ + 4y = 0y(0) = 4y′(0) = 1
y(1) =
10.Differential equationsHard
tyK = 5ymax​ = ?

A system obeys y″ + y′ + 16.25y = 81.25 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find the peak value ymax of its step response.

y″ + y′ + 16.25y = 81.25y(0) = 0y′(0) = 0
ymax =
11.Sequences & seriesMedium
kSn​12345678910S = ?

Find the sum S = Σk=1∞ 12/(k(k + 4)).

ak = 12/(k(k + 4))
S =
12.Sequences & seriesHard

Recognise the series and find its sum: S = Σk=0∞ 1.5ᵏ/k!.

ak = 1.5ᵏ/k!
S =

3Solutions

1.Limits

Answer: L = −0.5

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Divide by the highest power

(−2 + 5/x2 + 7/x3)/(4 + 2/x2 + 9/x3)

Let x → ∞

L = −2/4 = −0.5

Answer

L = −0.5

For equal degrees the limit is the ratio of the leading coefficients.

2.Limits

Answer: L = 0.2

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

L'Hôpital's rule

L = limx→0 [1/(1 + x)]/[5·cos 5x]

Substitute x = 0

L = 1/5 = 0.2

Answer

L = 0.2
3.Derivatives

Answer: f′(0.5) = 2.473

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Product rule

f′(x) = u′v + uv′ = ex·(1 + 1·x)

Substitute

f′(0.5) = 1.649·(1 + 0.5) = 2.473

Answer

f′(0.5) = 2.473
4.Derivatives

Answer: x = 4

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Derivative

f′(x) = 3x2 − 12x = 3·(x2 − 4x)

Solve f′(x) = 0

x = 0 or x = 4

Which one is which

f″(x) = 6x − 12: negative at a maximum, positive at a minimum.

f″(0) = −12, f″(4) = 12
x = 4

Answer

x = 4
5.Optimization

Answer: A = 553.6 cm²

Optimization: write the quantity to optimise as a function of one variable, using the constraint to eliminate the other. Set the derivative to zero and solve. Check that the critical point is a maximum or minimum (second derivative or sign change of the first derivative) and that it lies inside the allowed range; an endpoint such as a zero side length is not the answer.

Area as a function of r

h = 1000/(πr²)
A(r) = 2πr² + 2000/r

Set the derivative to zero

A″(r) = 4π + 4000/r³ > 0, so this is a minimum.

4πr − 2000/r² = 0 → r = ∛(1000/(2π)) = 5.419 cm

Height and area

h = 1000/(π·5.419²) = 2r = 10.84 cm
A = 2π·5.419² + 2000/5.419 = 553.6 cm²

Answer

A = 553.6 cm²

The cheapest closed can is as tall as it is wide: h = 2r.

6.Optimization

Answer: P = 21700 €

Optimization: write the quantity to optimise as a function of one variable, using the constraint to eliminate the other. Set the derivative to zero and solve. Check that the critical point is a maximum or minimum (second derivative or sign change of the first derivative) and that it lies inside the allowed range; an endpoint such as a zero side length is not the answer.

Profit function

P(q) = 50q − (14400 + 12q + 0.01q²) = −0.01q2 + 38q − 14400

Set the derivative to zero

P″(q) = −0.02 < 0, so this is a maximum.

38 − 0.02q = 0 → q = 1900

Maximum profit

P = 38·1900 − 0.01·1900² − 14400 = €21700

Answer

P = €21700
7.Integrals

Answer: I = 1.264

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = e−0.5x/(−0.5)

Evaluate at the limits

I = (e−1 − 1)/(−0.5) = (0.3679 − 1)/(−0.5) = 1.264

Answer

I = 1.264
8.Integrals

Answer: A = 36

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Zeros

9 − x² = 0 → x = ±3

Integrate

A = [9x − x³/3]−33 = 18 − (−18) = 36

Answer

A = 36
9.Differential equations

Answer: y(1) = 2.054

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Characteristic roots

(r + 1)(r + 4) = 0 → r = −1, −4

Constants from the initial values

A + B = 4, −1A − 4B = 1
A = 5.667, B = −1.667

Evaluate

y(1) = 5.667·e−1 + (−1.667)·e−4 = 2.054

Answer

y(1) = 2.054
10.Differential equations

Answer: ymax = 8.376

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Steady value and roots

yss = 5, r = −0.5 ± 4j

Constants from the initial values

y(0) = 5 + A = 0 → A = −5
y′(0) = −0.5A + 4B = 0 → B = −0.625

Peak

t = π/4 = 0.7854
ymax = 5·(1 + e−0.5·π/4) = 8.376

Answer

ymax = 8.376
11.Sequences & series

Answer: S = 6.25

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Partial fractions

12/(k(k + 4)) = (12/4)·(1/k − 1/(k + 4))

Cancel

S = (12/4)·(1 + 1/2 + 1/3 + 1/4) = 6.25

Answer

S = 6.25
12.Sequences & series

Answer: S = 4.482

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Standard series

Σ xᵏ/k! = eˣ

Substitute

x = 1.5
S = e1.5 = 4.482

Answer

S = 4.482

ExamProblems · examproblems.com/courses/ap-calculus-practice