Calculus 1: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Optimization

Method
write Q(x) with one variable, solve Q′(x) = 0, check Q″ or the endpoints
Maximum
Q′(x) = 0, Q″(x) < 0
Minimum
Q′(x) = 0, Q″(x) > 0
Closed cylinder
V = πr²h, A = 2πr² + 2πrh
Profit
P = R − C, R = p·q, maximum where MR = MC

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (√(9x2 − 4x) − 3x).

f(x) = √(9x2 − 4x) − 3xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (e−0.5x − 1 + 0.5x)/x².

f(x) = (e−0.5x − 1 + 0.5x)/x²x → 0
L =
3.DerivativesMedium
xyx = 0.5

Let f(x) = x·sin(x), with x in radians. Find f′(0.5).

f(x) = x·sin(x)x = 0.5 rad
f′(0.5) =
4.DerivativesHard
xy

Let f(x) = x3 − 3x2 − 9x + 1. Find the x-coordinate x of the local maximum.

f(x) = x3 − 3x2 − 9x + 1
x =
5.OptimizationMedium
xhxno lid

An open box (no lid) with a square base must hold 4000 cm³. Use the least possible material, that is the smallest area of the base plus the four sides. Find the minimum surface area S.

V = 4000 cm³
S = cm²
6.OptimizationHard
qP(q)maximum

A company sells q units per week. The price at which it can sell them is p = 180 − 0.25q euros per unit, and the cost is C(q) = 4400 + 75q euros. Find the weekly output q that maximises profit.

p = 180 − 0.25qC = 4400 + 75q
q = units
7.IntegralsMedium
xyπ/3y = x·sin x

Evaluate I = ∫₀π/3 x·sin x dx (x in radians).

∫₀π/3 x·sin x dx
I =
8.IntegralsHard
xyy = 2x2​y = 4x

Find the area A of the region enclosed by y = 2x2 and y = 4x.

y = 2x2y = 4x
A =

3Solutions

1.Limits

Answer: L = −0.6667

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Multiply by the conjugate

f(x) = −4x/(√(9x2 − 4x) + 3x)

Divide by x

f(x) = −4/(√(9 + (−4)/x) + 3)

Let x → ∞

L = −4/(3 + 3) = −0.6667

Answer

L = −0.6667
2.Limits

Answer: L = 0.125

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

(−0.5·e−0.5x + 0.5)/(2x) → 0/0

Second application

0.25·e−0.5x/2

Substitute x = 0

L = 0.25·1/2 = 0.125

Answer

L = 0.125
3.Derivatives

Answer: f′(0.5) = 0.9182

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Product and chain rule

f′(x) = sin(x) + x·cos(x)

Substitute

f′(0.5) = 0.4794 + 0.5·0.8776 = 0.9182

Answer

f′(0.5) = 0.9182
4.Derivatives

Answer: x = −1

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Derivative

f′(x) = 3x2 − 6x − 9 = 3·(x2 − 2x − 3)

Solve f′(x) = 0

x = −1 or x = 3

Which one is which

f″(x) = 6x − 6: negative at a maximum, positive at a minimum.

f″(−1) = −12, f″(3) = 12
x = −1

Answer

x = −1
5.Optimization

Answer: S = 1200 cm²

Optimization: write the quantity to optimise as a function of one variable, using the constraint to eliminate the other. Set the derivative to zero and solve. Check that the critical point is a maximum or minimum (second derivative or sign change of the first derivative) and that it lies inside the allowed range; an endpoint such as a zero side length is not the answer.

Area as a function of x

S(x) = x² + 16000/x

Set the derivative to zero

S″(x) = 2 + 32000/x³ > 0, so this is a minimum.

x³ = 8000 → x = 20 cm

Height and area

h = 4000/20² = 10 cm
S = 20² + 16000/20 = 1200 cm²

Answer

S = 1200 cm²

The best open box is half as tall as it is wide.

6.Optimization

Answer: q = 210 units

Optimization: write the quantity to optimise as a function of one variable, using the constraint to eliminate the other. Set the derivative to zero and solve. Check that the critical point is a maximum or minimum (second derivative or sign change of the first derivative) and that it lies inside the allowed range; an endpoint such as a zero side length is not the answer.

Profit function

P(q) = (180 − 0.25q)·q − (4400 + 75q) = −0.25q2 + 105q − 4400

Set the derivative to zero

P″(q) = −0.5 < 0, so this is a maximum.

q = 105/0.5 = 210

Price and profit

p = 180 − 0.25·210 = €127.5
P = 105·210 − 0.25·210² − 4400 = €6625

Answer

q = 210
7.Integrals

Answer: I = 0.3424

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = x, du = dx; dv = sin x dx, v = −cos x

Antiderivative

∫x sin x dx = −x cos x + ∫cos x dx = −x cos x + sin x

Limits

(−π/3·cos π/3 + sin π/3) − (0 + 0) = 0.3424

Answer

I = 0.3424
8.Integrals

Answer: A = 2.667

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

2x2 = 4x → x = 0, x = 2

Integrate upper minus lower

A = [2x2 − 0.6667x3]02 = 2.667

Answer

A = 2.667

ExamProblems · examproblems.com/courses/calculus-1