Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy02

Evaluate I = ∫02 e−x dx.

f(x) = e−x[0, 2]
I =
2.IntegralsHard
xy2y = x²eˣ

Evaluate I = ∫₀2 x²·eˣ dx.

∫₀2 x²eˣ dx
I =
3.Sequences & seriesMedium
AΣ (−1)ᵏ/√kk = 1 … ∞BΣ (5/3)ᵏk = 1 … ∞CΣ k/3ᵏk = 1 … ∞DΣ 1/(2ᵏ + k)k = 1 … ∞

Exactly one of the four series diverges. Click it.

A: Σ (−1)ᵏ/√kB: Σ (5/3)ᵏC: Σ k/3ᵏD: Σ 1/(2ᵏ + k)
  1. 1A: Σ (−1)ᵏ/√k
  2. 2B: Σ (5/3)ᵏ
  3. 3C: Σ k/3ᵏ
  4. 4D: Σ 1/(2ᵏ + k)
4.Sequences & seriesHard

Find the coefficient c₂ of (x − 1)² in the Taylor series of f(x) = e2x about a = 1.

f(x) = e2xa = 1k = 2
c₂ =
5.Multivariable calculusMedium
xy−202−202PQ

For f(x, y) = −2x²y³ − 5x² + 4xy, find the directional derivative Duf at P(1, −1) in the direction towards Q(−3, 3).

f(x, y) = −2x²y³ − 5x² + 4xyP = (1, −1)Q = (−3, 3)
Duf =
6.Multivariable calculusHard
xyx = 1y = 2x12

Evaluate I = ∬T (x + 4y) dA over the triangle T bounded by y = 0, x = 1 and y = 2x.

f = x + 4y0 ≤ x ≤ 10 ≤ y ≤ 2x
I =
7.Differential equationsMedium
tyy(0) = 5y(0.5) = ?

Solve y″ + 8y′ + 15y = 0 with y(0) = 5 and y′(0) = 4. Find y(0.5).

y″ + 8y′ + 15y = 0y(0) = 5y′(0) = 4
y(0.5) =
8.Differential equationsHard
tyK = 5y(1) = ?

A system obeys y″ + 3y′ + 6.25y = 31.25 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find y(1); angles in radians.

y″ + 3y′ + 6.25y = 31.25y(0) = 0y′(0) = 0
y(1) =

3Solutions

1.Integrals

Answer: I = 0.8647

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = e−x/(−1)

Evaluate at the limits

I = (e−2 − 1)/(−1) = (0.1353 − 1)/(−1) = 0.8647

Answer

I = 0.8647
2.Integrals

Answer: I = 12.78

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

First round

∫x²eˣ dx = x²eˣ − ∫2x eˣ dx

Second round

∫2x eˣ dx = 2x eˣ − 2eˣ
∫x²eˣ dx = eˣ(x² − 2x + 2)

Limits

7.389·(2) − 1·2 = 12.78

Answer

I = 12.78
3.Sequences & series

Answer: B: Σ (5/3)ᵏ

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Test each series

A: Σ (−1)ᵏ/√k → Alternating, with 1/√k decreasing to 0: converges (conditionally).
B: Σ (5/3)ᵏ → Geometric with r = 5/3 > 1: the terms grow, so it diverges.
C: Σ k/3ᵏ → Ratio test: L = 1/3 < 1, converges.
D: Σ 1/(2ᵏ + k) → Smaller than (1/2)ᵏ, a convergent geometric series: converges by comparison.

The answer

B: Σ (5/3)ᵏ

Answer

B: Σ (5/3)ᵏ
4.Sequences & series

Answer: c₂ = 14.78

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Derivative f⁽²⁾

f⁽²⁾(x) = 2²·e2x

Coefficient

c₂ = 2²·e2/2! = 14.78
c₂ = 14.78

Answer

c₂ = 14.78
5.Multivariable calculus

Answer: Duf = 5.657

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Gradient at the point

fx = −4xy³ − 10x + 4y → fx(1, −1) = −10
fy = −6x²y² + 4x → fy(1, −1) = −2

Unit vector

|v| = √((−4)² + 4²) = 5.657
u = (−0.7071, 0.7071)

Dot product

Duf = (−10)·(−0.7071) + (−2)·0.7071 = 5.657

Answer

Duf = 5.657
6.Multivariable calculus

Answer: I = 3.333

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Limits

0 ≤ x ≤ 1, 0 ≤ y ≤ 2x

Inner integral

∫02x (x + 4y) dy = x·2x + 4·(2x)²/2 = 10x²

Outer integral

I = 10·1³/3 = 3.333

Answer

I = 3.333
7.Differential equations

Answer: y(0.5) = 2.456

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Characteristic roots

(r + 3)(r + 5) = 0 → r = −3, −5

Constants from the initial values

A + B = 5, −3A − 5B = 4
A = 14.5, B = −9.5

Evaluate

y(0.5) = 14.5·e−1.5 + (−9.5)·e−2.5 = 2.456

Answer

y(0.5) = 2.456
8.Differential equations

Answer: y(1) = 4.703

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Steady value and roots

yss = 5, r = −1.5 ± 2j

Constants from the initial values

y(0) = 5 + A = 0 → A = −5
y′(0) = −1.5A + 2B = 0 → B = −3.75

Evaluate

y(1) = 5·(1 − e−1.5(cos 2 + 0.75·sin 2)) = 4.703

Answer

y(1) = 4.703

ExamProblems · examproblems.com/courses/calculus-2