Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy01

Evaluate I = ∫01 e−0.5x dx.

f(x) = e−0.5x[0, 1]
I =
2.IntegralsHard
xy−33

Find the area A of the region between the parabola y = 9 − x² and the x-axis.

y = 9 − x²
A =
3.Sequences & seriesMedium
AΣ (3/5)ᵏk = 1 … ∞BΣ k!/3ᵏk = 1 … ∞CΣ 1/(k(k + 1))k = 1 … ∞DΣ 10ᵏ/k!k = 1 … ∞

Exactly one of the four series diverges. Click it.

A: Σ (3/5)ᵏB: Σ k!/3ᵏC: Σ 1/(k(k + 1))D: Σ 10ᵏ/k!
  1. 1A: Σ (3/5)ᵏ
  2. 2B: Σ k!/3ᵏ
  3. 3C: Σ 1/(k(k + 1))
  4. 4D: Σ 10ᵏ/k!
4.Sequences & seriesHard

f(x) = cos x is approximated at x = 0.5 by its Maclaurin polynomial of degree n. With the Lagrange bound M·|x|ⁿ⁺¹/(n + 1)! and M = 1, find the smallest degree n that guarantees an error below 0.001.

f(x) = cos xx = 0.5M = 1ε = 0.001
n =
5.Multivariable calculusMedium
xy13P

Use the tangent plane of f(x, y) = −3x³y³ − 3x³ − y³ − 2xy at (1, 3) to approximate f(0.8, 2.9). Give the linear approximation L.

f(x, y) = −3x³y³ − 3x³ − y³ − 2xy(a, b) = (1, 3)(x, y) = (0.8, 2.9)
L =
6.Multivariable calculusHard
xyy = 3xy = x²39

Evaluate I = ∬R xy dA, where R is the region between the parabola y = x² and the line y = 3x.

y = x²y = 3xf = xy
I =
7.Differential equationsMedium
t (min)T (°C)23Ta​T = ?

A forged steel part at 300 °C is left to cool in a workshop at 29 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.01 min⁻¹, find its temperature T after 23 min.

T0 = 300 °CTa = 29 °Ck = 0.01 min⁻¹t = 23 min
T = °C
8.Differential equationsHard
ty1y(1) = ?

Solve y′ + y = 5e−0.5t with y(0) = 4. Find y(1).

y′ + y = 5e−0.5ty(0) = 4
y(1) =

3Solutions

1.Integrals

Answer: I = 0.7869

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = e−0.5x/(−0.5)

Evaluate at the limits

I = (e−0.5 − 1)/(−0.5) = (0.6065 − 1)/(−0.5) = 0.7869

Answer

I = 0.7869
2.Integrals

Answer: A = 36

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Zeros

9 − x² = 0 → x = ±3

Integrate

A = [9x − x³/3]−33 = 18 − (−18) = 36

Answer

A = 36
3.Sequences & series

Answer: B: Σ k!/3ᵏ

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Test each series

A: Σ (3/5)ᵏ → Geometric with r = 3/5, |r| < 1: converges.
B: Σ k!/3ᵏ → Ratio test: L = lim (k + 1)/3 = ∞, diverges.
C: Σ 1/(k(k + 1)) → Smaller than 1/k²: converges by comparison.
D: Σ 10ᵏ/k! → Ratio test: L = lim 10/(k + 1) = 0 < 1, converges.

The answer

B: Σ k!/3ᵏ

Answer

B: Σ k!/3ᵏ
4.Sequences & series

Answer: n = 4

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

n(n + 1)!bound010.5120.125260.020833240.00260441200.0002604

Bounds for increasing n

n = 3: 0.002604 ≥ 0.001
n = 4: 0.0002604 < 0.001

Smallest degree

n = 4

Answer

n = 4
5.Multivariable calculus

Answer: L = −54.4

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Value and slopes at the point

f(1, 3) = −117
fx = −9x²y³ − 9x² − 2y → fx(1, 3) = −258
fy = −9x³y² − 3y² − 2x → fy(1, 3) = −110

Tangent plane

z = −117 − 258(x − 1) − 110(y − 3)
z = −258x − 110y + 471

Linear approximation

L = −117 + (−258)·(−0.2) + (−110)·(−0.1) = −54.4

Answer

L = −54.4

The exact value is f = −68.026504; the plane is close because the step is small.

6.Multivariable calculus

Answer: I = 30.38

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Intersections

x² = 3x → x = 0, x = 3

Inner integral

∫x²3x xy dy = x·(9x² − x⁴)/2

Outer integral

I = ∫03 (9x³ − x⁵)/2 dx = 30.38

Answer

I = 30.38
7.Differential equations

Answer: T = 244.3 °C

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Solution of the cooling law

T(t) = 29 + 271·e−0.01t

Substitute t

T(23) = 29 + 271·0.7945 = 244.3 °C

Answer

T = 244.3 °C
8.Differential equations

Answer: y(1) = 3.858

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = et
(ety)′ = 5e0.5t

General solution

y = 5/0.5·e−0.5t + C·e−t = 10·e−0.5t + C·e−t

Initial condition

4 = 10 + C → C = −6

Evaluate

y(1) = 10·0.6065 + (−6)·0.3679 = 3.858

Answer

y(1) = 3.858

ExamProblems · examproblems.com/courses/calculus-2