Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy03

Evaluate I = ∫03 e−0.5x dx.

f(x) = e−0.5x[0, 3]
I =
2.IntegralsHard
xy1y = x²eˣ

Evaluate I = ∫₀1 x²·eˣ dx.

∫₀1 x²eˣ dx
I =
3.Sequences & seriesMedium
AΣ (k + 4)/k²k = 1 … ∞BΣ (4k + 1)/(k + 2)k = 1 … ∞CΣ (2/5)ᵏk = 1 … ∞DΣ 2/kk = 1 … ∞

Exactly one of the four series converges. Click it.

A: Σ (k + 4)/k²B: Σ (4k + 1)/(k + 2)C: Σ (2/5)ᵏD: Σ 2/k
  1. 1A: Σ (k + 4)/k²
  2. 2B: Σ (4k + 1)/(k + 2)
  3. 3C: Σ (2/5)ᵏ
  4. 4D: Σ 2/k
4.Sequences & seriesHard
xyfP₃0.5

Use the Maclaurin polynomial of degree 3 of f(x) = 1/(1 + x) to approximate f(0.5). Give P₃(0.5).

f(x) = 1/(1 + x)n = 3x = 0.5
P₃(0.5) =
5.Multivariable calculusMedium

z = xy² − x³ − y² with x = −2t + 1 and y = 2t² + 2. Use the chain rule to find dz/dt at t = 1.

z = xy² − x³ − y²x = −2t + 1y = 2t² + 2t = 1
dz/dt =
6.Multivariable calculusHard
xy−20202(1, 2)(−1, 2)

Find the critical points of f(x, y) = x³ − 3x + y² − 4y, classify them, and give the value fmin of f at its local minimum.

f(x, y) = x³ − 3x + y² − 4y
fmin =
7.Differential equationsMedium
t (min)T (°C)18Ta​23 °C

A can of soda at 3 °C is taken out of the fridge into a room at 29 °C. After 18 min its temperature is 23 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). Find the constant k in min⁻¹.

T0 = 3 °CTa = 29 °CT(18) = 23 °C
k = min⁻¹
8.Differential equationsHard
ty0.5y(0.5) = ?

Solve y′ + 3y = 9e−0.5t with y(0) = 4. Find y(0.5).

y′ + 3y = 9e−0.5ty(0) = 4
y(0.5) =

3Solutions

1.Integrals

Answer: I = 1.554

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = e−0.5x/(−0.5)

Evaluate at the limits

I = (e−1.5 − 1)/(−0.5) = (0.2231 − 1)/(−0.5) = 1.554

Answer

I = 1.554
2.Integrals

Answer: I = 0.7183

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

First round

∫x²eˣ dx = x²eˣ − ∫2x eˣ dx

Second round

∫2x eˣ dx = 2x eˣ − 2eˣ
∫x²eˣ dx = eˣ(x² − 2x + 2)

Limits

2.718·(1) − 1·2 = 0.7183

Answer

I = 0.7183
3.Sequences & series

Answer: C: Σ (2/5)ᵏ

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Test each series

A: Σ (k + 4)/k² → Behaves like 1/k for large k: diverges by comparison with the harmonic series.
B: Σ (4k + 1)/(k + 2) → The terms tend to 4, not 0: diverges by the n-th term test.
C: Σ (2/5)ᵏ → Geometric with r = 2/5, |r| < 1: converges.
D: Σ 2/k → A multiple of the harmonic series (p = 1): diverges.

The answer

C: Σ (2/5)ᵏ

Answer

C: Σ (2/5)ᵏ
4.Sequences & series

Answer: P₃(0.5) = 0.625

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Maclaurin polynomial

P₃(x) = 1 − x + x² − x³

Substitute

P₃(0.5) = 1 − 0.5 + 0.25 − 0.125 = 0.625

Answer

P₃(0.5) = 0.625

The exact value is f(0.5) = 0.666667; the error 0.0416667 shrinks when you take more terms or a point closer to 0.

5.Multivariable calculus

Answer: dz/dt = −90

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Point and rates

x(1) = −1, y(1) = 4
dx/dt = −2, dy/dt = 4t = 4

Partial derivatives

fx = y² − 3x² = 13
fy = 2xy − 2y = −16

Chain rule

dz/dt = 13·(−2) + (−16)·4 = −90

Answer

dz/dt = −90
6.Multivariable calculus

Answer: fmin = −6

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Critical points

Solve fx = 0 and fy = 0 together.

fx = (3x² − 3) = 0
fy = (2y − 4) = 0
(1, 2), (−1, 2)

Second-derivative test

(1, 2): fxx = 6, fyy = 2, fxy = 0, D = 12 → local minimum
(−1, 2): fxx = −6, fyy = 2, fxy = 0, D = −12 → saddle point

Value at the extremum

f(1, 2) = −6

Answer

fmin = −6
7.Differential equations

Answer: k = 0.08146 min⁻¹

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Ratio of temperature differences

e−18k = -6/-26

Solve for k

k = ln(-26/-6)/18 = 0.08146 min⁻¹

Answer

k = 0.08146 min⁻¹
8.Differential equations

Answer: y(0.5) = 2.893

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e3t
(e3ty)′ = 9e2.5t

General solution

y = 9/2.5·e−0.5t + C·e−3t = 3.6·e−0.5t + C·e−3t

Initial condition

4 = 3.6 + C → C = 0.4

Evaluate

y(0.5) = 3.6·0.7788 + 0.4·0.2231 = 2.893

Answer

y(0.5) = 2.893

ExamProblems · examproblems.com/courses/calculus-2