Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xyπ/2y = x·sin x

Evaluate I = ∫₀π/2 x·sin x dx (x in radians).

∫₀π/2 x·sin x dx
I =
2.IntegralsHard
xyy = x2​y = 3x

Find the area A of the region enclosed by y = x2 and y = 3x.

y = x2y = 3x
A =
3.Sequences & seriesMedium
AΣ 2ᵏ/k!k = 1 … ∞BΣ (5/3)ᵏk = 1 … ∞CΣ (−1)ᵏ/kk = 1 … ∞DΣ 1/k²k = 1 … ∞

Exactly one of the four series diverges. Click it.

A: Σ 2ᵏ/k!B: Σ (5/3)ᵏC: Σ (−1)ᵏ/kD: Σ 1/k²
  1. 1A: Σ 2ᵏ/k!
  2. 2B: Σ (5/3)ᵏ
  3. 3C: Σ (−1)ᵏ/k
  4. 4D: Σ 1/k²
4.Sequences & seriesHard

f(x) = sin x is approximated at x = 0.5 by its Maclaurin polynomial of degree n. With the Lagrange bound M·|x|ⁿ⁺¹/(n + 1)! and M = 1, find the smallest degree n that guarantees an error below 1 × 10⁻⁶.

f(x) = sin xx = 0.5M = 1ε = 1 × 10⁻⁶
n =
5.Multivariable calculusMedium
xy−4−202024PQ

For f(x, y) = −3x²y² − 4x² + 4y³ + xy, find the directional derivative Duf at P(−1, 2) in the direction towards Q(2, 5).

f(x, y) = −3x²y² − 4x² + 4y³ + xyP = (−1, 2)Q = (2, 5)
Duf =
6.Multivariable calculusHard
xyx = 1.2y = x1.2

The integral I = ∫01.2 ∫y1.2 1/(1 + x²)² dx dy cannot be done in this order. Reverse the order of integration and evaluate it.

f = 1/(1 + x²)²0 ≤ y ≤ x ≤ 1.2
I =
7.Differential equationsMedium
t (min)T (°C)24Ta​T = ?

A forged steel part at 400 °C is left to cool in a workshop at 20 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.04 min⁻¹, find its temperature T after 24 min.

T0 = 400 °CTa = 20 °Ck = 0.04 min⁻¹t = 24 min
T = °C
8.Differential equationsHard
ty1y(1) = ?

Solve y′ + 3y = 9e−t with y(0) = 0. Find y(1).

y′ + 3y = 9e−ty(0) = 0
y(1) =

3Solutions

1.Integrals

Answer: I = 1

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = x, du = dx; dv = sin x dx, v = −cos x

Antiderivative

∫x sin x dx = −x cos x + ∫cos x dx = −x cos x + sin x

Limits

(−π/2·cos π/2 + sin π/2) − (0 + 0) = 1

Answer

I = 1
2.Integrals

Answer: A = 4.5

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

x2 = 3x → x = 0, x = 3

Integrate upper minus lower

A = [1.5x2 − 0.3333x3]03 = 4.5

Answer

A = 4.5
3.Sequences & series

Answer: B: Σ (5/3)ᵏ

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Test each series

A: Σ 2ᵏ/k! → Ratio test: L = lim 2/(k + 1) = 0 < 1, converges.
B: Σ (5/3)ᵏ → Geometric with r = 5/3 > 1: the terms grow, so it diverges.
C: Σ (−1)ᵏ/k → Alternating, with 1/k decreasing to 0: converges (conditionally).
D: Σ 1/k² → p-series with p = 2 > 1: converges.

The answer

B: Σ (5/3)ᵏ

Answer

B: Σ (5/3)ᵏ
4.Sequences & series

Answer: n = 7

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

n(n + 1)!bound010.5120.125260.020833240.00260441200.000260457202.17 × 10⁻⁵650401.55 × 10⁻⁶7403209.688 × 10⁻⁸

Bounds for increasing n

n = 6: 1.55 × 10⁻⁶ ≥ 1 × 10⁻⁶
n = 7: 9.688 × 10⁻⁸ < 1 × 10⁻⁶

Smallest degree

n = 7

Answer

n = 7
5.Multivariable calculus

Answer: Duf = 48.79

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Gradient at the point

fx = −6xy² − 8x + y → fx(−1, 2) = 34
fy = −6x²y + 12y² + x → fy(−1, 2) = 35

Unit vector

|v| = √(3² + 3²) = 4.243
u = (0.7071, 0.7071)

Dot product

Duf = 34·0.7071 + 35·0.7071 = 48.79

Answer

Duf = 48.79
6.Multivariable calculus

Answer: I = 0.2951

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Region

0 ≤ y ≤ x, 0 ≤ x ≤ 1.2

Reversed order

I = ∫01.2 ∫0x 1/(1 + x²)² dy dx = ∫01.2 x·1/(1 + x²)² dx

Substitution u = x²

I = [−1/(2(1 + x²))]01.2 = 0.2951

Answer

I = 0.2951
7.Differential equations

Answer: T = 165.5 °C

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Solution of the cooling law

T(t) = 20 + 380·e−0.04t

Substitute t

T(24) = 20 + 380·0.3829 = 165.5 °C

Answer

T = 165.5 °C
8.Differential equations

Answer: y(1) = 1.431

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e3t
(e3ty)′ = 9e2t

General solution

y = 9/2·e−t + C·e−3t = 4.5·e−t + C·e−3t

Initial condition

0 = 4.5 + C → C = −4.5

Evaluate

y(1) = 4.5·0.3679 + (−4.5)·0.04979 = 1.431

Answer

y(1) = 1.431

ExamProblems · examproblems.com/courses/calculus-2