Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy4y = √(2x)

The region under y = √(2x) from x = 0 to x = 4 is rotated about the x-axis. Find the volume V of the solid (a paraboloid).

y = √(2x)0 ≤ x ≤ 4
V =
2.IntegralsHard
xy1.667y = 5xy = 3x²

The region between the line y = 5x and the parabola y = 3x² is rotated about the x-axis. Find the volume V of the solid.

y = 5xy = 3x²
V =
3.Sequences & seriesMedium
kSn​12345678910S = ?

Find the sum S = Σk=1∞ 6/(k(k + 3)).

ak = 6/(k(k + 3))
S =
4.Sequences & seriesHard

Find the coefficient c₄ of (x − 2)⁴ in the Taylor series of f(x) = ln x about a = 2.

f(x) = ln xa = 2k = 4
c₄ =
5.Multivariable calculusMedium
xy3−1∇fP

For f(x, y) = x³y² + 5x³ + y² − 2xy, find the maximum rate of change of f at the point (3, −1), that is |∇f|.

f(x, y) = x³y² + 5x³ + y² − 2xyP = (3, −1)
|∇f| =
6.Multivariable calculusHard
xyx = 0.8y = x0.8

The integral I = ∫00.8 ∫y0.8 cos(x²) dx dy cannot be done in this order. Reverse the order of integration and evaluate it.

f = cos(x²)0 ≤ y ≤ x ≤ 0.8
I =
7.Differential equationsMedium
t (min)T (°C)43Ta​T = ?

A forged steel part at 480 °C is left to cool in a workshop at 26 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.03 min⁻¹, find its temperature T after 43 min.

T0 = 480 °CTa = 26 °Ck = 0.03 min⁻¹t = 43 min
T = °C
8.Differential equationsHard
ty2y(2) = ?

Solve y′ + 2y = 6e−0.5t with y(0) = 4. Find y(2).

y′ + 2y = 6e−0.5ty(0) = 4
y(2) =

3Solutions

1.Integrals

Answer: V = 50.27

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Disc method

V = π∫₀4 2x dx

Integrate

V = π·2·4²/2 = 50.27

Answer

V = 50.27
2.Integrals

Answer: V = 48.48

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Intersection points

5x = 3x² → x = 0, x = 1.667

Washer method

V = π∫₀1.667 ((5x)² − (3x²)²) dx

Integrate

V = π(25·1.667³/3 − 9·1.667⁵/5) = π·15.43 = 48.48

Answer

V = 48.48
3.Sequences & series

Answer: S = 3.667

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Partial fractions

6/(k(k + 3)) = (6/3)·(1/k − 1/(k + 3))

Cancel

S = (6/3)·(1 + 1/2 + 1/3) = 3.667

Answer

S = 3.667
4.Sequences & series

Answer: c₄ = −0.01563

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Derivative f⁽⁴⁾

f⁽⁴⁾(x) = −6/x⁴

Coefficient

c₄ = f⁽⁴⁾(2)/4! = −6/(2⁴·24) = −0.01563
c₄ = −0.01563

Answer

c₄ = −0.01563
5.Multivariable calculus

Answer: |∇f| = 175.3

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Partial derivatives

fx = 3x²y² + 15x² − 2y → fx(3, −1) = 164
fy = 2x³y + 2y − 2x → fy(3, −1) = −62

Length of the gradient

|∇f| = √(164² + (−62)²) = 175.3

Answer

|∇f| = 175.3
6.Multivariable calculus

Answer: I = 0.2986

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Region

0 ≤ y ≤ x, 0 ≤ x ≤ 0.8

Reversed order

I = ∫00.8 ∫0x cos(x²) dy dx = ∫00.8 x·cos(x²) dx

Substitution u = x²

I = [sin(x²)/2]00.8 = 0.2986

Answer

I = 0.2986
7.Differential equations

Answer: T = 151 °C

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Solution of the cooling law

T(t) = 26 + 454·e−0.03t

Substitute t

T(43) = 26 + 454·0.2753 = 151 °C

Answer

T = 151 °C
8.Differential equations

Answer: y(2) = 1.472

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e2t
(e2ty)′ = 6e1.5t

General solution

y = 6/1.5·e−0.5t + C·e−2t = 4·e−0.5t + C·e−2t

Initial condition

4 = 4 + C → C = 0

Evaluate

y(2) = 4·0.3679 + 0·0.01832 = 1.472

Answer

y(2) = 1.472

ExamProblems · examproblems.com/courses/calculus-2