Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy1y = x·sin x

Evaluate I = ∫₀1 x·sin x dx (x in radians).

∫₀1 x·sin x dx
I =
2.IntegralsHard
xy1y = 3xy = 3x²

The region between the line y = 3x and the parabola y = 3x² is rotated about the x-axis. Find the volume V of the solid.

y = 3xy = 3x²
V =
3.Sequences & seriesMedium
k|aₖ₊₁/aₖ|123456789101112

Apply the ratio test to Σk=1∞ k²·5ᵏ/3ᵏ. Find L = lim |ak+1/ak|.

ak = k²·5ᵏ/3ᵏ
L =
4.Sequences & seriesHard

f(x) = cos x is approximated at x = 1.5 by its Maclaurin polynomial of degree n. With the Lagrange bound M·|x|ⁿ⁺¹/(n + 1)! and M = 1, find the smallest degree n that guarantees an error below 1 × 10⁻⁵.

f(x) = cos xx = 1.5M = 1ε = 1 × 10⁻⁵
n =
5.Multivariable calculusMedium
xy−4−20024PQ

For f(x, y) = −3xy² − 3x³ + y², find the directional derivative Duf at P(−2, 2) in the direction towards Q(−4, 0).

f(x, y) = −3xy² − 3x³ + y²P = (−2, 2)Q = (−4, 0)
Duf =
6.Multivariable calculusHard
xyx = 4y = 2x48

Evaluate I = ∬T (3x + 2y) dA over the triangle T bounded by y = 0, x = 4 and y = 2x.

f = 3x + 2y0 ≤ x ≤ 40 ≤ y ≤ 2x
I =
7.Differential equationsMedium
tyy(0) = 3y(2) = ?

Solve y″ + 6y′ + 9y = 0 with y(0) = 3 and y′(0) = 4. Find y(2).

y″ + 6y′ + 9y = 0y(0) = 3y′(0) = 4
y(2) =
8.Differential equationsHard
tyy(0) = 1y(0.5) = ?

Solve y″ + 2y′ + 26y = 0 with y(0) = 1 and y′(0) = 0 (released from rest). Find y(0.5); angles in radians.

y″ + 2y′ + 26y = 0y(0) = 1y′(0) = 0
y(0.5) =

3Solutions

1.Integrals

Answer: I = 0.3012

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = x, du = dx; dv = sin x dx, v = −cos x

Antiderivative

∫x sin x dx = −x cos x + ∫cos x dx = −x cos x + sin x

Limits

(−1·cos 1 + sin 1) − (0 + 0) = 0.3012

Answer

I = 0.3012
2.Integrals

Answer: V = 3.77

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Intersection points

3x = 3x² → x = 0, x = 1

Washer method

V = π∫₀1 ((3x)² − (3x²)²) dx

Integrate

V = π(9·1³/3 − 9·1⁵/5) = π·1.2 = 3.77

Answer

V = 3.77
3.Sequences & series

Answer: L = 1.667

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Ratio of consecutive terms

|ak+1/ak| = ((k + 1)/k)²·5/3 → 5/3

Conclusion

L = 1.667 > 1

Answer

L = 1.667

L > 1, so the series diverges.

4.Sequences & series

Answer: n = 10

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

n(n + 1)!bound011.5121.125260.56253240.210941200.0632857200.01582650400.003397403200.000635683628800.0001059936288001.589 × 10⁻⁵10399168002.167 × 10⁻⁶

Bounds for increasing n

n = 9: 1.589 × 10⁻⁵ ≥ 1 × 10⁻⁵
n = 10: 2.167 × 10⁻⁶ < 1 × 10⁻⁵

Smallest degree

n = 10

Answer

n = 10
5.Multivariable calculus

Answer: Duf = 14.14

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Gradient at the point

fx = −3y² − 9x² → fx(−2, 2) = −48
fy = −6xy + 2y → fy(−2, 2) = 28

Unit vector

|v| = √((−2)² + (−2)²) = 2.828
u = (−0.7071, −0.7071)

Dot product

Duf = (−48)·(−0.7071) + 28·(−0.7071) = 14.14

Answer

Duf = 14.14
6.Multivariable calculus

Answer: I = 213.3

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Limits

0 ≤ x ≤ 4, 0 ≤ y ≤ 2x

Inner integral

∫02x (3x + 2y) dy = 3x·2x + 2·(2x)²/2 = 10x²

Outer integral

I = 10·4³/3 = 213.3

Answer

I = 213.3
7.Differential equations

Answer: y(2) = 0.07188

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Double root

(r + 3)² = 0 → r = −3

Constants

A = y(0) = 3
y′(0) = B − 3A → B = 4 + 9 = 13

Evaluate

y(2) = (3 + 13·2)·e−6 = 0.07188

Answer

y(2) = 0.07188
8.Differential equations

Answer: y(0.5) = −0.4133

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Complex roots

r = −1 ± 5j

Constants

A = 1, B = 1·1/5 = 0.2

Evaluate

y(0.5) = e−0.5(1·cos 2.5 + 0.2·sin 2.5) = −0.4133

Answer

y(0.5) = −0.4133

ExamProblems · examproblems.com/courses/calculus-2