Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy13

Evaluate I = ∫13 3/x dx.

f(x) = 3/x[1, 3]
I =
2.IntegralsHard
xyy = 0.5x2​y = 3x

Find the area A of the region enclosed by y = 0.5x2 and y = 3x.

y = 0.5x2y = 3x
A =
3.Sequences & seriesMedium
k|aₖ₊₁/aₖ|123456789101112

Apply the ratio test to Σk=1∞ kᵏ/(2ᵏ·k!). Find L = lim |ak+1/ak|.

ak = kᵏ/(2ᵏ·k!)
L =
4.Sequences & seriesHard
xyfP₂0.4

Use the Maclaurin polynomial of degree 2 of f(x) = cos(3x) to approximate f(0.4). Give P₂(0.4).

f(x) = cos(3x)n = 2x = 0.4
P₂(0.4) =
5.Multivariable calculusMedium
xy−21∇fP

For f(x, y) = 3x²y³ − 4x³ − y² + 3xy, find the maximum rate of change of f at the point (−2, 1), that is |∇f|.

f(x, y) = 3x²y³ − 4x³ − y² + 3xyP = (−2, 1)
|∇f| =
6.Multivariable calculusHard
xy−202−202ABC

The marked points are the critical points of f(x, y) = x⁴ + y⁴ − 16xy. Click the saddle point.

f(x, y) = x⁴ + y⁴ − 16xy
  1. 1A (0, 0)
  2. 2B (−2, −2)
  3. 3C (2, 2)
7.Differential equationsMedium
t (min)T (°C)10Ta​T = ?

A can of soda at 6 °C is taken out of the fridge into a room at 25 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.07 min⁻¹, find its temperature T after 10 min.

T0 = 6 °CTa = 25 °Ck = 0.07 min⁻¹t = 10 min
T = °C
8.Differential equationsHard
ty0.5y(0.5) = ?

Solve y′ + y = 7e−3t with y(0) = 1. Find y(0.5).

y′ + y = 7e−3ty(0) = 1
y(0.5) =

3Solutions

1.Integrals

Answer: I = 3.296

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = 3·ln x

Evaluate at the limits

I = 3·(ln 3 − ln 1) = 3·ln 3 = 3.296

Answer

I = 3.296
2.Integrals

Answer: A = 18

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

0.5x2 = 3x → x = 0, x = 6

Integrate upper minus lower

A = [1.5x2 − 0.1667x3]06 = 18

Answer

A = 18
3.Sequences & series

Answer: L = 1.359

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Ratio of consecutive terms

|ak+1/ak| = (1 + 1/k)ᵏ/2 → e/2

Conclusion

L = 1.359 > 1

Answer

L = 1.359

L > 1, so the series diverges.

4.Sequences & series

Answer: P₂(0.4) = 0.28

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Maclaurin polynomial

P₂(x) = 1 − 4.5x²

Substitute

P₂(0.4) = 1 − 0.72 = 0.28

Answer

P₂(0.4) = 0.28

The exact value is f(0.4) = 0.362358; the error 0.0823578 shrinks when you take more terms or a point closer to 0.

5.Multivariable calculus

Answer: |∇f| = 63.51

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Partial derivatives

fx = 6xy³ − 12x² + 3y → fx(−2, 1) = −57
fy = 9x²y² − 2y + 3x → fy(−2, 1) = 28

Length of the gradient

|∇f| = √((−57)² + 28²) = 63.51

Answer

|∇f| = 63.51
6.Multivariable calculus

Answer: A (0, 0)

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Critical points

Solve fx = 0 and fy = 0 together.

fx = 4x³ − 16y = 0
fy = 4y³ − 16x = 0
(0, 0), (2, 2), (−2, −2)

Second-derivative test

(0, 0): fxx = 0, fyy = 0, fxy = −16, D = −256 → saddle point
(2, 2): fxx = 48, fyy = 48, fxy = −16, D = 2048 → local minimum
(−2, −2): fxx = 48, fyy = 48, fxy = −16, D = 2048 → local minimum

The point

A (0, 0): saddle point

Answer

A (0, 0)
7.Differential equations

Answer: T = 15.56 °C

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Solution of the cooling law

T(t) = 25 + (−19)·e−0.07t

Substitute t

T(10) = 25 + (−19)·0.4966 = 15.56 °C

Answer

T = 15.56 °C
8.Differential equations

Answer: y(0.5) = 1.948

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = et
(ety)′ = 7e−2t

General solution

y = 7/(−2)·e−3t + C·e−t = −3.5·e−3t + C·e−t

Initial condition

1 = −3.5 + C → C = 4.5

Evaluate

y(0.5) = −3.5·0.2231 + 4.5·0.6065 = 1.948

Answer

y(0.5) = 1.948

ExamProblems · examproblems.com/courses/calculus-2