Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy1y = x·cos x

Evaluate I = ∫₀1 x·cos x dx (x in radians).

∫₀1 x·cos x dx
I =
2.IntegralsHard
xy−22

Find the area A of the region between the parabola y = 4 − x² and the x-axis.

y = 4 − x²
A =
3.Sequences & seriesMedium
xx₀ = 0??R

Find the radius of convergence R of the power series Σk=1∞ (1/2)ᵏ·xᵏ/(k + 1).

Σ (1/2)ᵏ·xᵏ/(k + 1)x₀ = 0
R =
4.Sequences & seriesHard
xyfP₃0.5

Use the Maclaurin polynomial of degree 3 of f(x) = ln(1 − x) to approximate f(0.5). Give P₃(0.5).

f(x) = ln(1 − x)n = 3x = 0.5
P₃(0.5) =
5.Multivariable calculusMedium
xy050246PQ

For f(x, y) = −x³y − x² + y² + 4xy, find the directional derivative Duf at P(3, 3) in the direction towards Q(1, 1).

f(x, y) = −x³y − x² + y² + 4xyP = (3, 3)Q = (1, 1)
Duf =
6.Multivariable calculusHard
xy−202−20(1, −2)(−1, −2)

Find the critical points of f(x, y) = −x³ + 3x − y² − 4y, classify them, and give the value fmax of f at its local maximum.

f(x, y) = −x³ + 3x − y² − 4y
fmax =
7.Differential equationsMedium
t (min)T (°C)38Ta​70 °C47 °C

A forged steel part at 340 °C is left to cool in a workshop at 23 °C. After 38 min its temperature is 70 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). How long after the start, t, does it take to reach 47 °C?

T0 = 340 °CTa = 23 °CT(38) = 70 °CT = 47 °C
t = min
8.Differential equationsHard
t (min)m (kg)5 minm = ?

A tank holds 500 L of water in which 20 kg of salt is dissolved. Brine with 0.25 kg of salt per litre flows in at 2 L/min, and the well-mixed solution flows out at the same rate. How much salt m is in the tank after 5 min?

V = 500 Lm0 = 20 kgc = 0.25 kg/Lr = 2 L/min
m = kg

3Solutions

1.Integrals

Answer: I = 0.3818

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = x, du = dx; dv = cos x dx, v = sin x

Antiderivative

∫x cos x dx = x sin x − ∫sin x dx = x sin x + cos x

Limits

(1·sin 1 + cos 1) − (0 + 1) = 0.3818

Answer

I = 0.3818
2.Integrals

Answer: A = 10.67

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Zeros

4 − x² = 0 → x = ±2

Integrate

A = [4x − x³/3]−22 = 5.333 − (−5.333) = 10.67

Answer

A = 10.67
3.Sequences & series

Answer: R = 2

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Coefficients

ck/ck+1 = (1/(1/2))·(k + 2)/(k + 1) → 2

Radius

R = 2

Answer

R = 2

The ratio test says nothing at the two end points; they have to be checked separately.

4.Sequences & series

Answer: P₃(0.5) = −0.6667

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Maclaurin polynomial

P₃(x) = −x − 0.5x² − 0.3333x³

Substitute

P₃(0.5) = −0.5 − 0.125 − 0.0416667 = −0.6667

Answer

P₃(0.5) = −0.6667

The exact value is f(0.5) = −0.693147; the error −0.0264805 shrinks when you take more terms or a point closer to 0.

5.Multivariable calculus

Answer: Duf = 59.4

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Gradient at the point

fx = −3x²y − 2x + 4y → fx(3, 3) = −75
fy = −x³ + 2y + 4x → fy(3, 3) = −9

Unit vector

|v| = √((−2)² + (−2)²) = 2.828
u = (−0.7071, −0.7071)

Dot product

Duf = (−75)·(−0.7071) + (−9)·(−0.7071) = 59.4

Answer

Duf = 59.4
6.Multivariable calculus

Answer: fmax = 6

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Critical points

Solve fx = 0 and fy = 0 together.

fx = −(3x² − 3) = 0
fy = −(2y + 4) = 0
(1, −2), (−1, −2)

Second-derivative test

(1, −2): fxx = −6, fyy = −2, fxy = 0, D = 12 → local maximum
(−1, −2): fxx = 6, fyy = −2, fxy = 0, D = −12 → saddle point

Value at the extremum

f(1, −2) = 6

Answer

fmax = 6
7.Differential equations

Answer: t = 51.38 min

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Cooling constant

k = ln(317/47)/38 = 0.05023 min⁻¹

Time to reach the target

t = ln(317/24)/0.05023 = 51.38 min

Answer

t = 51.38 min
8.Differential equations

Answer: m = 22.08 kg

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Set up the equation

dm/dt = 2·0.25 − (2/500)·m = 0.5 − 0.004·m

Solve

The integrating factor is ert/V; the solution approaches the equilibrium c·V.

m(t) = 125 + (−105)·e−t/250

Substitute t

m(5) = 125 + (−105)·0.9802 = 22.08 kg

Answer

m = 22.08 kg

ExamProblems · examproblems.com/courses/calculus-2