Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy1y = 0.5x

The region under y = 0.5x from x = 0 to x = 1 is rotated about the x-axis. Find the volume V of the solid (a cone).

y = 0.5x0 ≤ x ≤ 1
V =
2.IntegralsHard
xyy = 2x2​y = x

Find the area A of the region enclosed by y = 2x2 and y = x.

y = 2x2y = x
A =
3.Sequences & seriesMedium
xx₀ = 0??R

Find the radius of convergence R of the power series Σk=1∞ (1/2)ᵏ·xᵏ/(k + 1).

Σ (1/2)ᵏ·xᵏ/(k + 1)x₀ = 0
R =
4.Sequences & seriesHard

Find the coefficient c₂ of (x − 16)² in the Taylor series of f(x) = √x about a = 16.

f(x) = √xa = 16k = 2
c₂ =
5.Multivariable calculusMedium
xy050vP

For f(x, y) = 3xy³ + 4x³ − 4y³ − 4xy, find the directional derivative Duf at (3, 1) in the direction of v = (0, −4).

f(x, y) = 3xy³ + 4x³ − 4y³ − 4xyP = (3, 1)v = (0, −4)
Duf =
6.Multivariable calculusHard
xyx = 1y = 2x12

Evaluate I = ∬T (2x + 4y) dA over the triangle T bounded by y = 0, x = 1 and y = 2x.

f = 2x + 4y0 ≤ x ≤ 10 ≤ y ≤ 2x
I =
7.Differential equationsMedium
t (min)T (°C)17Ta​T = ?

A can of soda at 6 °C is taken out of the fridge into a room at 22 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.06 min⁻¹, find its temperature T after 17 min.

T0 = 6 °CTa = 22 °Ck = 0.06 min⁻¹t = 17 min
T = °C
8.Differential equationsHard
xy12(1, −3)y(2) = ?

Solve the initial value problem y′ + y/x = x2 for x > 0, with y(1) = −3. Find y(2).

y′ + y/x = x2y(1) = −3
y(2) =

3Solutions

1.Integrals

Answer: V = 0.2618

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Disc method

V = π∫₀1 0.25x² dx

Integrate

V = π·0.25·1³/3 = 0.2618

Answer

V = 0.2618

Check: a cone of radius 0.5 and height 1 has (1/3)πr²h = 0.2618.

2.Integrals

Answer: A = 0.04167

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

2x2 = x → x = 0, x = 0.5

Integrate upper minus lower

A = [0.5x2 − 0.6667x3]00.5 = 0.04167

Answer

A = 0.04167
3.Sequences & series

Answer: R = 2

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Coefficients

ck/ck+1 = (1/(1/2))·(k + 2)/(k + 1) → 2

Radius

R = 2

Answer

R = 2

The ratio test says nothing at the two end points; they have to be checked separately.

4.Sequences & series

Answer: c₂ = −0.001953

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Derivative f⁽²⁾

f⁽²⁾(x) = −0.25·x1/2 − 2

Coefficient

c₂ = −0.25·161/2 − 2/2! = −0.001953
c₂ = −0.001953

Answer

c₂ = −0.001953
5.Multivariable calculus

Answer: Duf = −3

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Gradient at the point

fx = 3y³ + 12x² − 4y → fx(3, 1) = 107
fy = 9xy² − 12y² − 4x → fy(3, 1) = 3

Unit vector

|v| = √(0² + (−4)²) = 4
u = (0, −1)

Dot product

Duf = 107·0 + 3·(−1) = −3

Answer

Duf = −3
6.Multivariable calculus

Answer: I = 4

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Limits

0 ≤ x ≤ 1, 0 ≤ y ≤ 2x

Inner integral

∫02x (2x + 4y) dy = 2x·2x + 4·(2x)²/2 = 12x²

Outer integral

I = 12·1³/3 = 4

Answer

I = 4
7.Differential equations

Answer: T = 16.23 °C

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Solution of the cooling law

T(t) = 22 + (−16)·e−0.06t

Substitute t

T(17) = 22 + (−16)·0.3606 = 16.23 °C

Answer

T = 16.23 °C
8.Differential equations

Answer: y(2) = 0.375

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e∫1/x dx = x1

Integrate

(x1y)′ = x3 → x1y = 1x4/4 + C

Initial condition

−3 = 1/4 + C → C = −3.25

Evaluate

y(2) = (1·24/4 + (−3.25))/21 = 0.375

Answer

y(2) = 0.375

ExamProblems · examproblems.com/courses/calculus-2