Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy2y = x

The region under y = x from x = 0 to x = 2 is rotated about the x-axis. Find the volume V of the solid (a cone).

y = x0 ≤ x ≤ 2
V =
2.IntegralsHard
xy3y = 6xy = 2x²

The region between the line y = 6x and the parabola y = 2x² is rotated about the x-axis. Find the volume V of the solid.

y = 6xy = 2x²
V =
3.Sequences & seriesMedium
AΣ 1/(5k + 7)k = 1 … ∞BΣ (4/3)ᵏk = 1 … ∞CΣ k!/3ᵏk = 1 … ∞DΣ (−1)ᵏ/kk = 1 … ∞

Exactly one of the four series converges. Click it.

A: Σ 1/(5k + 7)B: Σ (4/3)ᵏC: Σ k!/3ᵏD: Σ (−1)ᵏ/k
  1. 1A: Σ 1/(5k + 7)
  2. 2B: Σ (4/3)ᵏ
  3. 3C: Σ k!/3ᵏ
  4. 4D: Σ (−1)ᵏ/k
4.Sequences & seriesHard
xyfP₂1.2

Use the Maclaurin polynomial of degree 2 of f(x) = cos(−x) to approximate f(1.2). Give P₂(1.2).

f(x) = cos(−x)n = 2x = 1.2
P₂(1.2) =
5.Multivariable calculusMedium

z = 2 ln(x² + 3y²) with x = −2t − 1 and y = t². Use the chain rule to find dz/dt at t = 0.

z = 2 ln(x² + 3y²)x = −2t − 1y = t²t = 0
dz/dt =
6.Multivariable calculusHard
xy−202−202(2, 1)(−2, 1)

f(x, y) = x³ − 12x + y² − 2y has a critical point at (2, 1). Compute the discriminant D = fxxfyy − fxy² there.

f(x, y) = x³ − 12x + y² − 2yP = (2, 1)
D =
7.Differential equationsMedium
t (min)T (°C)22Ta​T = ?

A cup of coffee at 80 °C is left in a room at 23 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.11 min⁻¹, find its temperature T after 22 min.

T0 = 80 °CTa = 23 °Ck = 0.11 min⁻¹t = 22 min
T = °C
8.Differential equationsHard
ty0.5y(0.5) = ?

Solve y′ + 3y = 7e−0.5t with y(0) = 0. Find y(0.5).

y′ + 3y = 7e−0.5ty(0) = 0
y(0.5) =

3Solutions

1.Integrals

Answer: V = 8.378

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Disc method

V = π∫₀2 1x² dx

Integrate

V = π·1·2³/3 = 8.378

Answer

V = 8.378

Check: a cone of radius 2 and height 2 has (1/3)πr²h = 8.378.

2.Integrals

Answer: V = 407.2

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Intersection points

6x = 2x² → x = 0, x = 3

Washer method

V = π∫₀3 ((6x)² − (2x²)²) dx

Integrate

V = π(36·3³/3 − 4·3⁵/5) = π·129.6 = 407.2

Answer

V = 407.2
3.Sequences & series

Answer: D: Σ (−1)ᵏ/k

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Test each series

A: Σ 1/(5k + 7) → Behaves like 1/(5k) for large k; compared with the harmonic series it diverges.
B: Σ (4/3)ᵏ → Geometric with r = 4/3 > 1: the terms grow, so it diverges.
C: Σ k!/3ᵏ → Ratio test: L = lim (k + 1)/3 = ∞, diverges.
D: Σ (−1)ᵏ/k → Alternating, with 1/k decreasing to 0: converges (conditionally).

The answer

D: Σ (−1)ᵏ/k

Answer

D: Σ (−1)ᵏ/k
4.Sequences & series

Answer: P₂(1.2) = 0.28

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Maclaurin polynomial

P₂(x) = 1 − 0.5x²

Substitute

P₂(1.2) = 1 − 0.72 = 0.28

Answer

P₂(1.2) = 0.28

The exact value is f(1.2) = 0.362358; the error 0.0823578 shrinks when you take more terms or a point closer to 0.

5.Multivariable calculus

Answer: dz/dt = 8

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Point and rates

x(0) = −1, y(0) = 0
dx/dt = −2, dy/dt = 2t = 0

Partial derivatives

fx = 4x/(x² + 3y²) = −4
fy = 12y/(x² + 3y²) = 0

Chain rule

dz/dt = (−4)·(−2) + 0·0 = 8

Answer

dz/dt = 8
6.Multivariable calculus

Answer: D = 24

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Second derivatives

fxx = 12, fyy = 2, fxy = 0

Discriminant

D = 12·2 − 0² = 24
→ local minimum

Answer

D = 24
7.Differential equations

Answer: T = 28.07 °C

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Solution of the cooling law

T(t) = 23 + 57·e−0.11t

Substitute t

T(22) = 23 + 57·0.08892 = 28.07 °C

Answer

T = 28.07 °C
8.Differential equations

Answer: y(0.5) = 1.556

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e3t
(e3ty)′ = 7e2.5t

General solution

y = 7/2.5·e−0.5t + C·e−3t = 2.8·e−0.5t + C·e−3t

Initial condition

0 = 2.8 + C → C = −2.8

Evaluate

y(0.5) = 2.8·0.7788 + (−2.8)·0.2231 = 1.556

Answer

y(0.5) = 1.556

ExamProblems · examproblems.com/courses/calculus-2