Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy4y = √(4x)

The region under y = √(4x) from x = 0 to x = 4 is rotated about the x-axis. Find the volume V of the solid (a paraboloid).

y = √(4x)0 ≤ x ≤ 4
V =
2.IntegralsHard
xy−11

Find the area A of the region between the parabola y = 1 − x² and the x-axis.

y = 1 − x²
A =
3.Sequences & seriesMedium
AΣ k!/10ᵏk = 1 … ∞BΣ k/(k + 5)k = 1 … ∞CΣ 3/kk = 1 … ∞DΣ 1/(2ᵏ + k)k = 1 … ∞

Exactly one of the four series converges. Click it.

A: Σ k!/10ᵏB: Σ k/(k + 5)C: Σ 3/kD: Σ 1/(2ᵏ + k)
  1. 1A: Σ k!/10ᵏ
  2. 2B: Σ k/(k + 5)
  3. 3C: Σ 3/k
  4. 4D: Σ 1/(2ᵏ + k)
4.Sequences & seriesHard

f(x) = eˣ is approximated at x = 2 by its Maclaurin polynomial of degree n. With the Lagrange bound M·|x|ⁿ⁺¹/(n + 1)! and M = 8, find the smallest degree n that guarantees an error below 0.0001.

f(x) = eˣx = 2M = 8ε = 0.0001
n =
5.Multivariable calculusMedium

z = 3x³y² − 3x² − 2y³ + 4xy with x = −3t and y = t² + 2. Use the chain rule to find dz/dt at t = 0.

z = 3x³y² − 3x² − 2y³ + 4xyx = −3ty = t² + 2t = 0
dz/dt =
6.Multivariable calculusHard
xy−20−20(−1, −2)

f(x, y) = −2x² + 3xy − 3y² + 2x − 9y + 5 has a critical point at (−1, −2). Compute the discriminant D = fxxfyy − fxy² there.

f(x, y) = −2x² + 3xy − 3y² + 2x − 9y + 5P = (−1, −2)
D =
7.Differential equationsMedium
tyy(0) = 3y(0.5) = ?

Solve y″ + 4y′ + 4y = 0 with y(0) = 3 and y′(0) = 1. Find y(0.5).

y″ + 4y′ + 4y = 0y(0) = 3y′(0) = 1
y(0.5) =
8.Differential equationsHard
t (min)m (kg)t = ?89 kg

A tank holds 500 L of water in which 5 kg of salt is dissolved. Brine with 0.25 kg of salt per litre flows in at 4 L/min, and the well-mixed solution flows out at the same rate. After how many minutes t does the tank contain 89 kg of salt?

V = 500 Lm0 = 5 kgc = 0.25 kg/Lr = 4 L/min
t = min

3Solutions

1.Integrals

Answer: V = 100.5

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Disc method

V = π∫₀4 4x dx

Integrate

V = π·4·4²/2 = 100.5

Answer

V = 100.5
2.Integrals

Answer: A = 1.333

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Zeros

1 − x² = 0 → x = ±1

Integrate

A = [1x − x³/3]−11 = 0.6667 − (−0.6667) = 1.333

Answer

A = 1.333
3.Sequences & series

Answer: D: Σ 1/(2ᵏ + k)

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Test each series

A: Σ k!/10ᵏ → Ratio test: L = lim (k + 1)/10 = ∞, diverges.
B: Σ k/(k + 5) → The terms tend to 1, not 0: diverges by the n-th term test.
C: Σ 3/k → A multiple of the harmonic series (p = 1): diverges.
D: Σ 1/(2ᵏ + k) → Smaller than (1/2)ᵏ, a convergent geometric series: converges by comparison.

The answer

D: Σ 1/(2ᵏ + k)

Answer

D: Σ 1/(2ᵏ + k)
4.Sequences & series

Answer: n = 11

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

n(n + 1)!bound011612162610.673245.33341202.13357200.7111650400.20327403200.0507983628800.01129936288000.00225710399168000.0004105114790016006.841 × 10⁻⁵

Bounds for increasing n

n = 10: 0.0004105 ≥ 0.0001
n = 11: 6.841 × 10⁻⁵ < 0.0001

Smallest degree

n = 11

Answer

n = 11
5.Multivariable calculus

Answer: dz/dt = −24

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Point and rates

x(0) = 0, y(0) = 2
dx/dt = −3, dy/dt = 2t = 0

Partial derivatives

fx = 9x²y² − 6x + 4y = 8
fy = 6x³y − 6y² + 4x = −24

Chain rule

dz/dt = 8·(−3) + (−24)·0 = −24

Answer

dz/dt = −24
6.Multivariable calculus

Answer: D = 15

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Second derivatives

fxx = −4, fyy = −6, fxy = 3

Discriminant

D = (−4)·(−6) − 3² = 15
→ local maximum

Answer

D = 15
7.Differential equations

Answer: y(0.5) = 2.391

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Double root

(r + 2)² = 0 → r = −2

Constants

A = y(0) = 3
y′(0) = B − 2A → B = 1 + 6 = 7

Evaluate

y(0.5) = (3 + 7·0.5)·e−1 = 2.391

Answer

y(0.5) = 2.391
8.Differential equations

Answer: t = 150.5 min

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Result

m(t) = 125 + (−120)·e−t/125

Solve for t

e−t/125 = (125 − 89)/(125 − 5) = 0.3
t = 125·ln(3.333) = 150.5 min

Answer

t = 150.5 min

ExamProblems · examproblems.com/courses/calculus-2