In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Integrals
Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx
Method
Rewrite the integrand as a sum of simple terms where possible.
Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
Use substitution when you see a function and its derivative together.
For a definite integral, evaluate F(b) − F(a).
Sequences & series
Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!
Method
Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.
Multivariable calculus
Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ
Method
For a partial derivative, treat the other variable as a constant and use the one-variable rules.
For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.
Differential equations
Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m
2Practice problems
1.IntegralsMedium
Evaluate I = ∫02 2x·(x² + 1)3 dx.
f(x) = 2x·(x² + 1)3[0, 2]
I =
2.IntegralsHard
The region between the line y = 2x and the parabola y = x² is rotated about the x-axis. Find the volume V of the solid.
y = 2xy = x²
V =
3.Sequences & seriesMedium
Exactly one of the four series diverges. Click it.
f(x) = sin x is approximated at x = 2 by its Maclaurin polynomial of degree n. With the Lagrange bound M·|x|ⁿ⁺¹/(n + 1)! and M = 1, find the smallest degree n that guarantees an error below 1 × 10⁻⁶.
f(x) = sin xx = 2M = 1ε = 1 × 10⁻⁶
n =
5.Multivariable calculusMedium
The tangent plane to z = −4x³y³ + 4x³ − 5y³ − 4xy at the point where (x, y) = (−2, −2) can be written as z = px + qy + c. Find c.
Find the critical points of f(x, y) = x⁴ + y⁴ − 4xy, classify them, and give the value fmin of f at its local minimum.
f(x, y) = x⁴ + y⁴ − 4xy
fmin =
7.Differential equationsMedium
Solve y″ + 7y′ + 12y = 0 with y(0) = 5 and y′(0) = 1. Find y(1).
y″ + 7y′ + 12y = 0y(0) = 5y′(0) = 1
y(1) =
8.Differential equationsHard
A system obeys y″ + 3y′ + 6.25y = 62.5 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find the peak value ymax of its step response.
y″ + 3y′ + 6.25y = 62.5y(0) = 0y′(0) = 0
ymax =
3Solutions
1.Integrals
Answer: I = 156
Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.
Substitution
u = x² + 1, du = 2x dx
I = ∫15 u3 du
Integrate and evaluate
I = [u4/4]15 = (625 − 1)/4 = 156
Answer
I = 156
2.Integrals
Answer: V = 13.4
Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.
Intersection points
2x = 1x² → x = 0, x = 2
Washer method
V = π∫₀2 ((2x)² − (1x²)²) dx
Integrate
V = π(4·2³/3 − 1·2⁵/5) = π·4.267 = 13.4
Answer
V = 13.4
3.Sequences & series
Answer: A: Σ (2k + 1)/(k + 2)
Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.
Test each series
A: Σ (2k + 1)/(k + 2) → The terms tend to 2, not 0: diverges by the n-th term test.
B: Σ 1/k⁴ → p-series with p = 4 > 1: converges.
C: Σ (2/5)ᵏ → Geometric with r = 2/5, |r| < 1: converges.
D: Σ (−1)ᵏ/k → Alternating, with 1/k decreasing to 0: converges (conditionally).
The answer
A: Σ (2k + 1)/(k + 2)
Answer
A: Σ (2k + 1)/(k + 2)
4.Sequences & series
Answer: n = 13
Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.
Bounds for increasing n
n = 12: 1.316 × 10⁻⁶ ≥ 1 × 10⁻⁶
n = 13: 1.879 × 10⁻⁷ < 1 × 10⁻⁶
Smallest degree
n = 13
Answer
n = 13
5.Multivariable calculus
Answer: c = 1280
Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.
Value and slopes at the point
f(−2, −2) = −264
fx = −12x²y³ + 12x² − 4y → fx(−2, −2) = 440
fy = −12x³y² − 15y² − 4x → fy(−2, −2) = 332
Tangent plane
z = −264 + 440(x + 2) + 332(y + 2)
z = 440x + 332y + 1280
Constant term
c = 1280
Answer
c = 1280
6.Multivariable calculus
Answer: fmin = −2
Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).
Critical points
Solve fx = 0 and fy = 0 together.
fx = 4x³ − 4y = 0
fy = 4y³ − 4x = 0
(0, 0), (1, 1), (−1, −1)
Second-derivative test
(0, 0): fxx = 0, fyy = 0, fxy = −4, D = −16 → saddle point
(1, 1): fxx = 12, fyy = 12, fxy = −4, D = 128 → local minimum
(−1, −1): fxx = 12, fyy = 12, fxy = −4, D = 128 → local minimum
Value at the extremum
f(1, 1) = −2
Answer
fmin = −2
7.Differential equations
Answer: y(1) = 0.7525
Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.
Characteristic roots
(r + 3)(r + 4) = 0 → r = −3, −4
Constants from the initial values
A + B = 5, −3A − 4B = 1
A = 21, B = −16
Evaluate
y(1) = 21·e−3 + (−16)·e−4 = 0.7525
Answer
y(1) = 0.7525
8.Differential equations
Answer: ymax = 10.95
Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.