Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy2y = 3x

The region under y = 3x from x = 0 to x = 2 is rotated about the x-axis. Find the volume V of the solid (a cone).

y = 3x0 ≤ x ≤ 2
V =
2.IntegralsHard
xy2.5y = 5xy = 2x²

The region between the line y = 5x and the parabola y = 2x² is rotated about the x-axis. Find the volume V of the solid.

y = 5xy = 2x²
V =
3.Sequences & seriesMedium
k|aₖ₊₁/aₖ|123456789101112

Apply the ratio test to Σk=1∞ k²·3ᵏ/4ᵏ. Find L = lim |ak+1/ak|.

ak = k²·3ᵏ/4ᵏ
L =
4.Sequences & seriesHard
xyfP₄1

Use the Maclaurin polynomial of degree 4 of f(x) = cos(2x) to approximate f(1). Give P₄(1).

f(x) = cos(2x)n = 4x = 1
P₄(1) =
5.Multivariable calculusMedium
xy−2−1∇fP

For f(x, y) = 3x²y³ − 4x² − 3y³, find the direction of steepest ascent at (−2, −1) as the angle θ from the positive x-axis, in degrees between −180° and 180°.

f(x, y) = 3x²y³ − 4x² − 3y³P = (−2, −1)
θ = °
6.Multivariable calculusHard
xyy = 4xy = x²416

Find the area I = ∬R 1 dA of the region R between the parabola y = x² and the line y = 4x.

y = x²y = 4xf = 1
I =
7.Differential equationsMedium
t (min)T (°C)9Ta​47 °C

A cup of coffee at 92 °C is left in a room at 20 °C. After 9 min its temperature is 47 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). Find the constant k in min⁻¹.

T0 = 92 °CTa = 20 °CT(9) = 47 °C
k = min⁻¹
8.Differential equationsHard
t (min)m (kg)t = ?23 kg

A tank holds 500 L of water in which 20 kg of salt is dissolved. Brine with 0.05 kg of salt per litre flows in at 2 L/min, and the well-mixed solution flows out at the same rate. After how many minutes t does the tank contain 23 kg of salt?

V = 500 Lm0 = 20 kgc = 0.05 kg/Lr = 2 L/min
t = min

3Solutions

1.Integrals

Answer: V = 75.4

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Disc method

V = π∫₀2 9x² dx

Integrate

V = π·9·2³/3 = 75.4

Answer

V = 75.4

Check: a cone of radius 6 and height 2 has (1/3)πr²h = 75.4.

2.Integrals

Answer: V = 163.6

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Intersection points

5x = 2x² → x = 0, x = 2.5

Washer method

V = π∫₀2.5 ((5x)² − (2x²)²) dx

Integrate

V = π(25·2.5³/3 − 4·2.5⁵/5) = π·52.08 = 163.6

Answer

V = 163.6
3.Sequences & series

Answer: L = 0.75

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Ratio of consecutive terms

|ak+1/ak| = ((k + 1)/k)²·3/4 → 3/4

Conclusion

L = 0.75 < 1

Answer

L = 0.75

L < 1, so the series converges.

4.Sequences & series

Answer: P₄(1) = −0.3333

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Maclaurin polynomial

P₄(x) = 1 − 2x² + 0.6667x⁴

Substitute

P₄(1) = 1 − 2 + 0.666667 = −0.3333

Answer

P₄(1) = −0.3333

The exact value is f(1) = −0.416147; the error −0.0828135 shrinks when you take more terms or a point closer to 0.

5.Multivariable calculus

Answer: θ = 43.96 °

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Partial derivatives

fx = 6xy³ − 8x → fx(−2, −1) = 28
fy = 9x²y² − 9y² → fy(−2, −1) = 27

Direction

θ = atan2(27, 28) = 43.96°

Answer

θ = 43.96°
6.Multivariable calculus

Answer: I = 10.67

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Intersections

x² = 4x → x = 0, x = 4

Inner integral

∫x²4x 1 dy = 4x − x²

Outer integral

I = ∫04 (4x − x²) dx = 10.67

Answer

I = 10.67
7.Differential equations

Answer: k = 0.109 min⁻¹

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Ratio of temperature differences

e−9k = 27/72

Solve for k

k = ln(72/27)/9 = 0.109 min⁻¹

Answer

k = 0.109 min⁻¹
8.Differential equations

Answer: t = 229.1 min

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Result

m(t) = 25 + (−5)·e−t/250

Solve for t

e−t/250 = (25 − 23)/(25 − 20) = 0.4
t = 250·ln(2.5) = 229.1 min

Answer

t = 229.1 min

ExamProblems · examproblems.com/courses/calculus-2