Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy01

Evaluate I = ∫01 2x·(x² + 1)1 dx.

f(x) = 2x·(x² + 1)1[0, 1]
I =
2.IntegralsHard
xy1y = xy = x²

The region between the line y = x and the parabola y = x² is rotated about the x-axis. Find the volume V of the solid.

y = xy = x²
V =
3.Sequences & seriesMedium
k|aₖ₊₁/aₖ|123456789101112

Apply the ratio test to Σk=1∞ (k!)²·1ᵏ/(2k)!. Find L = lim |ak+1/ak|.

ak = (k!)²·1ᵏ/(2k)!
L =
4.Sequences & seriesHard
xyfP₄1.2

Use the Maclaurin polynomial of degree 4 of f(x) = e2x to approximate f(1.2). Give P₄(1.2).

f(x) = e2xn = 4x = 1.2
P₄(1.2) =
5.Multivariable calculusMedium

z = 3xe0.5y with x = −2t + 1 and y = −2t² + 2. Use the chain rule to find dz/dt at t = 2.

z = 3xe0.5yx = −2t + 1y = −2t² + 2t = 2
dz/dt =
6.Multivariable calculusHard
xyx = 2y = x2

The integral I = ∫02 ∫y2 sin(x²) dx dy cannot be done in this order. Reverse the order of integration and evaluate it.

f = sin(x²)0 ≤ y ≤ x ≤ 2
I =
7.Differential equationsMedium
tyy(0) = 2y(0.5) = ?

Solve y″ + 6y′ + 9y = 0 with y(0) = 2 and y′(0) = -2. Find y(0.5).

y″ + 6y′ + 9y = 0y(0) = 2y′(0) = -2
y(0.5) =
8.Differential equationsHard
tyK = 10y(0.75) = ?

A system obeys y″ + y′ + 4.25y = 42.5 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find y(0.75); angles in radians.

y″ + y′ + 4.25y = 42.5y(0) = 0y′(0) = 0
y(0.75) =

3Solutions

1.Integrals

Answer: I = 1.5

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Substitution

u = x² + 1, du = 2x dx
I = ∫12 u1 du

Integrate and evaluate

I = [u2/2]12 = (4 − 1)/2 = 1.5

Answer

I = 1.5
2.Integrals

Answer: V = 0.4189

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Intersection points

1x = 1x² → x = 0, x = 1

Washer method

V = π∫₀1 ((1x)² − (1x²)²) dx

Integrate

V = π(1·1³/3 − 1·1⁵/5) = π·0.1333 = 0.4189

Answer

V = 0.4189
3.Sequences & series

Answer: L = 0.25

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Ratio of consecutive terms

|ak+1/ak| = 1·(k + 1)²/((2k + 2)(2k + 1)) → 1/4

Conclusion

L = 0.25 < 1

Answer

L = 0.25

L < 1, so the series converges.

4.Sequences & series

Answer: P₄(1.2) = 9.966

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Maclaurin polynomial

P₄(x) = 1 + 2x + 2x² + 1.333x³ + 0.6667x⁴

Substitute

P₄(1.2) = 1 + 2.4 + 2.88 + 2.304 + 1.3824 = 9.966

Answer

P₄(1.2) = 9.966

The exact value is f(1.2) = 11.023176; the error 1.056776 shrinks when you take more terms or a point closer to 0.

5.Multivariable calculus

Answer: dz/dt = 1.494

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Point and rates

x(2) = −3, y(2) = −6
dx/dt = −2, dy/dt = −4t = −8

Partial derivatives

fx = 3·e0.5y = 0.1494
fy = 1.5xe0.5y = −0.224

Chain rule

dz/dt = 0.1494·(−2) + (−0.224)·(−8) = 1.494

Answer

dz/dt = 1.494
6.Multivariable calculus

Answer: I = 0.8268

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Region

0 ≤ y ≤ x, 0 ≤ x ≤ 2

Reversed order

I = ∫02 ∫0x sin(x²) dy dx = ∫02 x·sin(x²) dx

Substitution u = x²

I = [−cos(x²)/2]02 = 0.8268

Answer

I = 0.8268
7.Differential equations

Answer: y(0.5) = 0.8925

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Double root

(r + 3)² = 0 → r = −3

Constants

A = y(0) = 2
y′(0) = B − 3A → B = -2 + 6 = 4

Evaluate

y(0.5) = (2 + 4·0.5)·e−1.5 = 0.8925

Answer

y(0.5) = 0.8925
8.Differential equations

Answer: y(0.75) = 7.8

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Steady value and roots

yss = 10, r = −0.5 ± 2j

Constants from the initial values

y(0) = 10 + A = 0 → A = −10
y′(0) = −0.5A + 2B = 0 → B = −2.5

Evaluate

y(0.75) = 10·(1 − e−0.375(cos 1.5 + 0.25·sin 1.5)) = 7.8

Answer

y(0.75) = 7.8

ExamProblems · examproblems.com/courses/calculus-2