Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy14y = x ln x

Evaluate I = ∫₁4 x·ln x dx.

∫₁4 x ln x dx
I =
2.IntegralsHard
xy1.667y = 5xy = 3x²

The region between the line y = 5x and the parabola y = 3x² is rotated about the x-axis. Find the volume V of the solid.

y = 5xy = 3x²
V =
3.Sequences & seriesMedium
xx₀ = −1??R

Find the radius of convergence R of the power series Σk=1∞ 3ᵏ·(x + 1)ᵏ/(k + 1).

Σ 3ᵏ·(x + 1)ᵏ/(k + 1)x₀ = −1
R =
4.Sequences & seriesHard

Recognise the series and find its sum: S = Σk=1∞ (−1)k+1·0.75ᵏ/k.

ak = (−1)k+1·0.75ᵏ/k
S =
5.Multivariable calculusMedium
xy05024vP

For f(x, y) = 5xy² + 5x² + y² − 3xy, find the directional derivative Duf at (3, 2) in the direction of v = (−3, 2).

f(x, y) = 5xy² + 5x² + y² − 3xyP = (3, 2)v = (−3, 2)
Duf =
6.Multivariable calculusHard
xyy = 4xy = x²416

Evaluate I = ∬R x dA, where R is the region between the parabola y = x² and the line y = 4x.

y = x²y = 4xf = x
I =
7.Differential equationsMedium
tyy(0) = 1y(1) = ?

Solve y″ + 3y′ + 2y = 0 with y(0) = 1 and y′(0) = 6. Find y(1).

y″ + 3y′ + 2y = 0y(0) = 1y′(0) = 6
y(1) =
8.Differential equationsHard
t (min)m (kg)t = ?40 kg

A tank holds 500 L of pure water. Brine with 0.2 kg of salt per litre flows in at 10 L/min, and the well-mixed solution flows out at the same rate. After how many minutes t does the tank contain 40 kg of salt?

V = 500 Lm0 = 0 kgc = 0.2 kg/Lr = 10 L/min
t = min

3Solutions

1.Integrals

Answer: I = 7.34

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = ln x, du = dx/x; dv = x dx, v = x²/2

Antiderivative

∫x ln x dx = (x²/2)ln x − ∫(x/2) dx = (x²/2)ln x − x²/4

Limits

(8·ln 4 − 4) − (0 − 0.25) = 7.34

Answer

I = 7.34
2.Integrals

Answer: V = 48.48

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Intersection points

5x = 3x² → x = 0, x = 1.667

Washer method

V = π∫₀1.667 ((5x)² − (3x²)²) dx

Integrate

V = π(25·1.667³/3 − 9·1.667⁵/5) = π·15.43 = 48.48

Answer

V = 48.48
3.Sequences & series

Answer: R = 0.3333

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Coefficients

ck/ck+1 = (1/3)·(k + 2)/(k + 1) → 0.3333

Radius

R = 0.3333

Answer

R = 0.3333

The ratio test says nothing at the two end points; they have to be checked separately.

4.Sequences & series

Answer: S = 0.5596

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Standard series

Σ (−1)k+1xᵏ/k = ln(1 + x)

Substitute

x = 0.75
S = ln 1.75 = 0.5596

Answer

S = 0.5596
5.Multivariable calculus

Answer: Duf = −6.102

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Gradient at the point

fx = 5y² + 10x − 3y → fx(3, 2) = 44
fy = 10xy + 2y − 3x → fy(3, 2) = 55

Unit vector

|v| = √((−3)² + 2²) = 3.606
u = (−0.8321, 0.5547)

Dot product

Duf = 44·(−0.8321) + 55·0.5547 = −6.102

Answer

Duf = −6.102
6.Multivariable calculus

Answer: I = 21.33

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Intersections

x² = 4x → x = 0, x = 4

Inner integral

∫x²4x x dy = x(4x − x²) = 4x² − x³

Outer integral

I = ∫04 (4x² − x³) dx = 21.33

Answer

I = 21.33
7.Differential equations

Answer: y(1) = 1.996

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Characteristic roots

(r + 1)(r + 2) = 0 → r = −1, −2

Constants from the initial values

A + B = 1, −1A − 2B = 6
A = 8, B = −7

Evaluate

y(1) = 8·e−1 + (−7)·e−2 = 1.996

Answer

y(1) = 1.996
8.Differential equations

Answer: t = 25.54 min

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Result

m(t) = 100 + (−100)·e−t/50

Solve for t

e−t/50 = (100 − 40)/(100 − 0) = 0.6
t = 50·ln(1.667) = 25.54 min

Answer

t = 25.54 min

ExamProblems · examproblems.com/courses/calculus-2