Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy24

Evaluate I = ∫24 5/x dx.

f(x) = 5/x[2, 4]
I =
2.IntegralsHard
xy−33

Find the area A of the region between the parabola y = 9 − x² and the x-axis.

y = 9 − x²
A =
3.Sequences & seriesMedium
k|aₖ₊₁/aₖ|123456789101112

Apply the ratio test to Σk=1∞ kᵏ/(3ᵏ·k!). Find L = lim |ak+1/ak|.

ak = kᵏ/(3ᵏ·k!)
L =
4.Sequences & seriesHard

Recognise the series and find its sum: S = Σk=1∞ (−1)k+1·0.2ᵏ/k.

ak = (−1)k+1·0.2ᵏ/k
S =
5.Multivariable calculusMedium
xy−4−202−2024vP

For f(x, y) = −2x³y³ − 2x³ + 3xy, find the directional derivative Duf at (−1, 2) in the direction of v = (−2, −4).

f(x, y) = −2x³y³ − 2x³ + 3xyP = (−1, 2)v = (−2, −4)
Duf =
6.Multivariable calculusHard
xy−20202(2, 2)(−2, 2)

Find the critical points of f(x, y) = x³ − 12x + y² − 4y, classify them, and give the value fmin of f at its local minimum.

f(x, y) = x³ − 12x + y² − 4y
fmin =
7.Differential equationsMedium
tyy(0) = 5y(1.5) = ?

Solve y″ + 4y′ + 3y = 0 with y(0) = 5 and y′(0) = 4. Find y(1.5).

y″ + 4y′ + 3y = 0y(0) = 5y′(0) = 4
y(1.5) =
8.Differential equationsHard
t (min)m (kg)40 minm = ?

A tank holds 1000 L of pure water. Brine with 0.1 kg of salt per litre flows in at 5 L/min, and the well-mixed solution flows out at the same rate. How much salt m is in the tank after 40 min?

V = 1000 Lm0 = 0 kgc = 0.1 kg/Lr = 5 L/min
m = kg

3Solutions

1.Integrals

Answer: I = 3.466

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = 5·ln x

Evaluate at the limits

I = 5·(ln 4 − ln 2) = 5·ln 2 = 3.466

Answer

I = 3.466
2.Integrals

Answer: A = 36

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Zeros

9 − x² = 0 → x = ±3

Integrate

A = [9x − x³/3]−33 = 18 − (−18) = 36

Answer

A = 36
3.Sequences & series

Answer: L = 0.9061

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Ratio of consecutive terms

|ak+1/ak| = (1 + 1/k)ᵏ/3 → e/3

Conclusion

L = 0.9061 < 1

Answer

L = 0.9061

L < 1, so the series converges.

4.Sequences & series

Answer: S = 0.1823

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Standard series

Σ (−1)k+1xᵏ/k = ln(1 + x)

Substitute

x = 0.2
S = ln 1.2 = 0.1823

Answer

S = 0.1823
5.Multivariable calculus

Answer: Duf = 2.683

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Gradient at the point

fx = −6x²y³ − 6x² + 3y → fx(−1, 2) = −48
fy = −6x³y² + 3x → fy(−1, 2) = 21

Unit vector

|v| = √((−2)² + (−4)²) = 4.472
u = (−0.4472, −0.8944)

Dot product

Duf = (−48)·(−0.4472) + 21·(−0.8944) = 2.683

Answer

Duf = 2.683
6.Multivariable calculus

Answer: fmin = −20

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Critical points

Solve fx = 0 and fy = 0 together.

fx = (3x² − 12) = 0
fy = (2y − 4) = 0
(2, 2), (−2, 2)

Second-derivative test

(2, 2): fxx = 12, fyy = 2, fxy = 0, D = 24 → local minimum
(−2, 2): fxx = −12, fyy = 2, fxy = 0, D = −24 → saddle point

Value at the extremum

f(2, 2) = −20

Answer

fmin = −20
7.Differential equations

Answer: y(1.5) = 2.07

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Characteristic roots

(r + 1)(r + 3) = 0 → r = −1, −3

Constants from the initial values

A + B = 5, −1A − 3B = 4
A = 9.5, B = −4.5

Evaluate

y(1.5) = 9.5·e−1.5 + (−4.5)·e−4.5 = 2.07

Answer

y(1.5) = 2.07
8.Differential equations

Answer: m = 18.13 kg

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Set up the equation

dm/dt = 5·0.1 − (5/1000)·m = 0.5 − 0.005·m

Solve

The integrating factor is ert/V; the solution approaches the equilibrium c·V.

m(t) = 100 + (−100)·e−t/200

Substitute t

m(40) = 100 + (−100)·0.8187 = 18.13 kg

Answer

m = 18.13 kg

ExamProblems · examproblems.com/courses/calculus-2