Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy3y = 2x

The region under y = 2x from x = 0 to x = 3 is rotated about the x-axis. Find the volume V of the solid (a cone).

y = 2x0 ≤ x ≤ 3
V =
2.IntegralsHard
xy1y = x²eˣ

Evaluate I = ∫₀1 x²·eˣ dx.

∫₀1 x²eˣ dx
I =
3.Sequences & seriesMedium
kSn​12345678910S = ?

Find the sum S = Σk=1∞ 6/(k(k + 4)).

ak = 6/(k(k + 4))
S =
4.Sequences & seriesHard
xyfP₃−0.4

Use the Maclaurin polynomial of degree 3 of f(x) = 1/(1 + x) to approximate f(−0.4). Give P₃(−0.4).

f(x) = 1/(1 + x)n = 3x = −0.4
P₃(−0.4) =
5.Multivariable calculusMedium

z = 3 sin(3x + 3y) with x = 3t + 1 and y = 2t². Use the chain rule to find dz/dt at t = −1.

z = 3 sin(3x + 3y)x = 3t + 1y = 2t²t = −1
dz/dt =
6.Multivariable calculusHard
xy02−2−101(1, −1)

f(x, y) = −x² + 2xy − 2y² + 4x − 6y + 2 has a critical point at (1, −1). Compute the discriminant D = fxxfyy − fxy² there.

f(x, y) = −x² + 2xy − 2y² + 4x − 6y + 2P = (1, −1)
D =
7.Differential equationsMedium
tyy(0) = 5y(0.5) = ?

Solve y″ + 8y′ + 16y = 0 with y(0) = 5 and y′(0) = 1. Find y(0.5).

y″ + 8y′ + 16y = 0y(0) = 5y′(0) = 1
y(0.5) =
8.Differential equationsHard
tyK = 10y(1) = ?

A system obeys y″ + y′ + 25.25y = 252.5 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find y(1); angles in radians.

y″ + y′ + 25.25y = 252.5y(0) = 0y′(0) = 0
y(1) =

3Solutions

1.Integrals

Answer: V = 113.1

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Disc method

V = π∫₀3 4x² dx

Integrate

V = π·4·3³/3 = 113.1

Answer

V = 113.1

Check: a cone of radius 6 and height 3 has (1/3)πr²h = 113.1.

2.Integrals

Answer: I = 0.7183

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

First round

∫x²eˣ dx = x²eˣ − ∫2x eˣ dx

Second round

∫2x eˣ dx = 2x eˣ − 2eˣ
∫x²eˣ dx = eˣ(x² − 2x + 2)

Limits

2.718·(1) − 1·2 = 0.7183

Answer

I = 0.7183
3.Sequences & series

Answer: S = 3.125

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Partial fractions

6/(k(k + 4)) = (6/4)·(1/k − 1/(k + 4))

Cancel

S = (6/4)·(1 + 1/2 + 1/3 + 1/4) = 3.125

Answer

S = 3.125
4.Sequences & series

Answer: P₃(−0.4) = 1.624

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Maclaurin polynomial

P₃(x) = 1 − x + x² − x³

Substitute

P₃(−0.4) = 1 + 0.4 + 0.16 + 0.064 = 1.624

Answer

P₃(−0.4) = 1.624

The exact value is f(−0.4) = 1.666667; the error 0.0426667 shrinks when you take more terms or a point closer to 0.

5.Multivariable calculus

Answer: dz/dt = −9

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Point and rates

x(−1) = −2, y(−1) = 2
dx/dt = 3, dy/dt = 4t = −4

Partial derivatives

fx = 9 cos(3x + 3y) = 9
fy = 9 cos(3x + 3y) = 9

Chain rule

dz/dt = 9·3 + 9·(−4) = −9

Answer

dz/dt = −9
6.Multivariable calculus

Answer: D = 4

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Second derivatives

fxx = −2, fyy = −4, fxy = 2

Discriminant

D = (−2)·(−4) − 2² = 4
→ local maximum

Answer

D = 4
7.Differential equations

Answer: y(0.5) = 2.098

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Double root

(r + 4)² = 0 → r = −4

Constants

A = y(0) = 5
y′(0) = B − 4A → B = 1 + 20 = 21

Evaluate

y(0.5) = (5 + 21·0.5)·e−2 = 2.098

Answer

y(0.5) = 2.098
8.Differential equations

Answer: y(1) = 8.861

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Steady value and roots

yss = 10, r = −0.5 ± 5j

Constants from the initial values

y(0) = 10 + A = 0 → A = −10
y′(0) = −0.5A + 5B = 0 → B = −1

Evaluate

y(1) = 10·(1 − e−0.5(cos 5 + 0.1·sin 5)) = 8.861

Answer

y(1) = 8.861

ExamProblems · examproblems.com/courses/calculus-2