Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy14

Evaluate I = ∫14 4/x dx.

f(x) = 4/x[1, 4]
I =
2.IntegralsHard
xy2.5y = x²eˣ

Evaluate I = ∫₀2.5 x²·eˣ dx.

∫₀2.5 x²eˣ dx
I =
3.Sequences & seriesMedium
xx₀ = 1??R

The power series Σk=1∞ k!·(x − 1)ᵏ/kᵏ converges on an interval around x₀ = 1. Find the left end x of that interval.

Σ k!·(x − 1)ᵏ/kᵏx₀ = 1
x =
4.Sequences & seriesHard

f(x) = cos x is approximated at x = 1.5 by its Maclaurin polynomial of degree n. With the Lagrange bound M·|x|ⁿ⁺¹/(n + 1)! and M = 1, find the smallest degree n that guarantees an error below 0.0001.

f(x) = cos xx = 1.5M = 1ε = 0.0001
n =
5.Multivariable calculusMedium
xy21P

The tangent plane to z = 3x²y³ − 3y³ + 2xy at the point where (x, y) = (2, 1) can be written as z = px + qy + c. Find c.

f(x, y) = 3x²y³ − 3y³ + 2xy(a, b) = (2, 1)
c =
6.Multivariable calculusHard
xyx = 1.5y = x1.5

The integral I = ∫01.5 ∫y1.5 1/(1 + x²)² dx dy cannot be done in this order. Reverse the order of integration and evaluate it.

f = 1/(1 + x²)²0 ≤ y ≤ x ≤ 1.5
I =
7.Differential equationsMedium
t (min)T (°C)34Ta​T = ?

A forged steel part at 500 °C is left to cool in a workshop at 27 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.01 min⁻¹, find its temperature T after 34 min.

T0 = 500 °CTa = 27 °Ck = 0.01 min⁻¹t = 34 min
T = °C
8.Differential equationsHard
t (min)m (kg)45 minm = ?

A tank holds 500 L of pure water. Brine with 0.25 kg of salt per litre flows in at 10 L/min, and the well-mixed solution flows out at the same rate. How much salt m is in the tank after 45 min?

V = 500 Lm0 = 0 kgc = 0.25 kg/Lr = 10 L/min
m = kg

3Solutions

1.Integrals

Answer: I = 5.545

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = 4·ln x

Evaluate at the limits

I = 4·(ln 4 − ln 1) = 4·ln 4 = 5.545

Answer

I = 5.545
2.Integrals

Answer: I = 37.59

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

First round

∫x²eˣ dx = x²eˣ − ∫2x eˣ dx

Second round

∫2x eˣ dx = 2x eˣ − 2eˣ
∫x²eˣ dx = eˣ(x² − 2x + 2)

Limits

12.18·(3.25) − 1·2 = 37.59

Answer

I = 37.59
3.Sequences & series

Answer: x = −1.718

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Coefficients

ck/ck+1 = (1 + 1/k)ᵏ → e

Radius

R = 2.718

Interval

−1.718 < x < 3.718
x = −1.718

Answer

x = −1.718

The ratio test says nothing at the two end points; they have to be checked separately.

4.Sequences & series

Answer: n = 9

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

n(n + 1)!bound011.5121.125260.56253240.210941200.0632857200.01582650400.003397403200.000635683628800.0001059936288001.589 × 10⁻⁵

Bounds for increasing n

n = 8: 0.0001059 ≥ 0.0001
n = 9: 1.589 × 10⁻⁵ < 0.0001

Smallest degree

n = 9

Answer

n = 9
5.Multivariable calculus

Answer: c = −46

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Value and slopes at the point

f(2, 1) = 13
fx = 6xy³ + 2y → fx(2, 1) = 14
fy = 9x²y² − 9y² + 2x → fy(2, 1) = 31

Tangent plane

z = 13 + 14(x − 2) + 31(y − 1)
z = 14x + 31y − 46

Constant term

c = −46

Answer

c = −46
6.Multivariable calculus

Answer: I = 0.3462

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Region

0 ≤ y ≤ x, 0 ≤ x ≤ 1.5

Reversed order

I = ∫01.5 ∫0x 1/(1 + x²)² dy dx = ∫01.5 x·1/(1 + x²)² dx

Substitution u = x²

I = [−1/(2(1 + x²))]01.5 = 0.3462

Answer

I = 0.3462
7.Differential equations

Answer: T = 363.7 °C

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Solution of the cooling law

T(t) = 27 + 473·e−0.01t

Substitute t

T(34) = 27 + 473·0.7118 = 363.7 °C

Answer

T = 363.7 °C
8.Differential equations

Answer: m = 74.18 kg

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Set up the equation

dm/dt = 10·0.25 − (10/500)·m = 2.5 − 0.02·m

Solve

The integrating factor is ert/V; the solution approaches the equilibrium c·V.

m(t) = 125 + (−125)·e−t/50

Substitute t

m(45) = 125 + (−125)·0.4066 = 74.18 kg

Answer

m = 74.18 kg

ExamProblems · examproblems.com/courses/calculus-2