Calculus 2: cram pack

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |a_k+1/a_k|; root test: L = lim |a_k|^1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σc_k(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |c_k/c_k+1|; an alternating series with terms decreasing to 0 converges.

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Gradient: ∇f = (f_x, f_y) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is D_uf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + f_x(a, b)(x − a) + f_y(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = f_x·dx/dt + f_y·dy/dt.

Critical points and double integrals: a critical point has f_x = f_y = 0. Second-derivative test with D = f_xxf_yy − f_xy²: D > 0 and f_xx > 0 is a local minimum, D > 0 and f_xx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = e^rt: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·e^r₁t + B·e^r₂t (overdamped); a double root r gives y = (A + Bt)·e^rt (critically damped); complex roots −α ± jω give y = e^−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζω_ny′ + ω_n²y = 0, ω_n is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = e^rt: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·e^r₁t + B·e^r₂t (overdamped); a double root r gives y = (A + Bt)·e^rt (critically damped); complex roots −α ± jω give y = e^−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζω_ny′ + ω_n²y = 0, ω_n is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.