Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy13y = x ln x

Evaluate I = ∫₁3 x·ln x dx.

∫₁3 x ln x dx
I =
2.IntegralsHard
xy1y = xy = x²

The region between the line y = x and the parabola y = x² is rotated about the x-axis. Find the volume V of the solid.

y = xy = x²
V =
3.Sequences & seriesMedium
kSn​12345678910S = ?

Find the sum S = Σk=1∞ 3/(k(k + 3)).

ak = 3/(k(k + 3))
S =
4.Sequences & seriesHard

Find the coefficient c₄ of (x + 1)⁴ in the Taylor series of f(x) = e2x about a = −1.

f(x) = e2xa = −1k = 4
c₄ =
5.Multivariable calculusMedium
xy050246PQ

For f(x, y) = −xy² + 4x³ − 4xy, find the directional derivative Duf at P(1, 3) in the direction towards Q(−3, 6).

f(x, y) = −xy² + 4x³ − 4xyP = (1, 3)Q = (−3, 6)
Duf =
6.Multivariable calculusHard
xy−202−2024AB

The marked points are the critical points of f(x, y) = x³ − 3x + y² − 6y. Click the local minimum.

f(x, y) = x³ − 3x + y² − 6y
  1. 1A (−1, 3)
  2. 2B (1, 3)
7.Differential equationsMedium
t (min)T (°C)9Ta​T = ?

A cup of coffee at 80 °C is left in a room at 24 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.1 min⁻¹, find its temperature T after 9 min.

T0 = 80 °CTa = 24 °Ck = 0.1 min⁻¹t = 9 min
T = °C
8.Differential equationsHard
ty2y(2) = ?

Solve y′ + y = 2e−3t with y(0) = 0. Find y(2).

y′ + y = 2e−3ty(0) = 0
y(2) =

3Solutions

1.Integrals

Answer: I = 2.944

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = ln x, du = dx/x; dv = x dx, v = x²/2

Antiderivative

∫x ln x dx = (x²/2)ln x − ∫(x/2) dx = (x²/2)ln x − x²/4

Limits

(4.5·ln 3 − 2.25) − (0 − 0.25) = 2.944

Answer

I = 2.944
2.Integrals

Answer: V = 0.4189

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Intersection points

1x = 1x² → x = 0, x = 1

Washer method

V = π∫₀1 ((1x)² − (1x²)²) dx

Integrate

V = π(1·1³/3 − 1·1⁵/5) = π·0.1333 = 0.4189

Answer

V = 0.4189
3.Sequences & series

Answer: S = 1.833

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Partial fractions

3/(k(k + 3)) = (3/3)·(1/k − 1/(k + 3))

Cancel

S = (3/3)·(1 + 1/2 + 1/3) = 1.833

Answer

S = 1.833
4.Sequences & series

Answer: c₄ = 0.09022

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Derivative f⁽⁴⁾

f⁽⁴⁾(x) = 2⁴·e2x

Coefficient

c₄ = 2⁴·e−2/4! = 0.09022
c₄ = 0.09022

Answer

c₄ = 0.09022
5.Multivariable calculus

Answer: Duf = 1.2

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Gradient at the point

fx = −y² + 12x² − 4y → fx(1, 3) = −9
fy = −2xy − 4x → fy(1, 3) = −10

Unit vector

|v| = √((−4)² + 3²) = 5
u = (−0.8, 0.6)

Dot product

Duf = (−9)·(−0.8) + (−10)·0.6 = 1.2

Answer

Duf = 1.2
6.Multivariable calculus

Answer: B (1, 3)

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Critical points

Solve fx = 0 and fy = 0 together.

fx = (3x² − 3) = 0
fy = (2y − 6) = 0
(1, 3), (−1, 3)

Second-derivative test

(1, 3): fxx = 6, fyy = 2, fxy = 0, D = 12 → local minimum
(−1, 3): fxx = −6, fyy = 2, fxy = 0, D = −12 → saddle point

The point

B (1, 3): local minimum

Answer

B (1, 3)
7.Differential equations

Answer: T = 46.77 °C

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Solution of the cooling law

T(t) = 24 + 56·e−0.1t

Substitute t

T(9) = 24 + 56·0.4066 = 46.77 °C

Answer

T = 46.77 °C
8.Differential equations

Answer: y(2) = 0.1329

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = et
(ety)′ = 2e−2t

General solution

y = 2/(−2)·e−3t + C·e−t = −1·e−3t + C·e−t

Initial condition

0 = −1 + C → C = 1

Evaluate

y(2) = −1·0.002479 + 1·0.1353 = 0.1329

Answer

y(2) = 0.1329

ExamProblems · examproblems.com/courses/calculus-2