Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy13y = x ln x

Evaluate I = ∫₁3 x·ln x dx.

∫₁3 x ln x dx
I =
2.IntegralsHard
xyy = 0.5x2​y = 2x

Find the area A of the region enclosed by y = 0.5x2 and y = 2x.

y = 0.5x2y = 2x
A =
3.Sequences & seriesMedium
kSn​12345678910

Find the sum S = Σk=120 4/(k(k + 1)).

ak = 4/(k(k + 1))n = 20
S =
4.Sequences & seriesHard
xyfP₄−1.5

Use the Maclaurin polynomial of degree 4 of f(x) = cos x to approximate f(−1.5). Give P₄(−1.5).

f(x) = cos xn = 4x = −1.5
P₄(−1.5) =
5.Multivariable calculusMedium
xy−2−2P

The tangent plane to z = 2x²y² + x² − 4y³ + xy at the point where (x, y) = (−2, −2) can be written as z = px + qy + c. Find c.

f(x, y) = 2x²y² + x² − 4y³ + xy(a, b) = (−2, −2)
c =
6.Multivariable calculusHard
xy−202−202(0, 0)(2, 2)(−2, −2)

f(x, y) = x⁴ + y⁴ − 16xy has a critical point at (0, 0). Compute the discriminant D = fxxfyy − fxy² there.

f(x, y) = x⁴ + y⁴ − 16xyP = (0, 0)
D =
7.Differential equationsMedium
t (min)T (°C)14Ta​286 °C

A forged steel part at 420 °C is left to cool in a workshop at 29 °C. After 14 min its temperature is 286 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). Find the constant k in min⁻¹.

T0 = 420 °CTa = 29 °CT(14) = 286 °C
k = min⁻¹
8.Differential equationsHard
t (min)m (kg)15 minm = ?

A tank holds 200 L of water in which 5 kg of salt is dissolved. Brine with 0.05 kg of salt per litre flows in at 20 L/min, and the well-mixed solution flows out at the same rate. How much salt m is in the tank after 15 min?

V = 200 Lm0 = 5 kgc = 0.05 kg/Lr = 20 L/min
m = kg

3Solutions

1.Integrals

Answer: I = 2.944

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = ln x, du = dx/x; dv = x dx, v = x²/2

Antiderivative

∫x ln x dx = (x²/2)ln x − ∫(x/2) dx = (x²/2)ln x − x²/4

Limits

(4.5·ln 3 − 2.25) − (0 − 0.25) = 2.944

Answer

I = 2.944
2.Integrals

Answer: A = 5.333

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

0.5x2 = 2x → x = 0, x = 4

Integrate upper minus lower

A = [x2 − 0.1667x3]04 = 5.333

Answer

A = 5.333
3.Sequences & series

Answer: S = 3.81

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Partial fractions

4/(k(k + 1)) = 4·(1/k − 1/(k + 1))

Cancel

S = 4·(1 − 1/21) = 3.81

Answer

S = 3.81
4.Sequences & series

Answer: P₄(−1.5) = 0.08594

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Maclaurin polynomial

P₄(x) = 1 − 0.5x² + 0.04167x⁴

Substitute

P₄(−1.5) = 1 − 1.125 + 0.210938 = 0.08594

Answer

P₄(−1.5) = 0.08594

The exact value is f(−1.5) = 0.0707372; the error −0.0152003 shrinks when you take more terms or a point closer to 0.

5.Multivariable calculus

Answer: c = −168

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Value and slopes at the point

f(−2, −2) = 72
fx = 4xy² + 2x + y → fx(−2, −2) = −38
fy = 4x²y − 12y² + x → fy(−2, −2) = −82

Tangent plane

z = 72 − 38(x + 2) − 82(y + 2)
z = −38x − 82y − 168

Constant term

c = −168

Answer

c = −168
6.Multivariable calculus

Answer: D = −256

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Second derivatives

fxx = 0, fyy = 0, fxy = −16

Discriminant

D = 0·0 − (−16)² = −256
→ saddle point

Answer

D = −256
7.Differential equations

Answer: k = 0.02997 min⁻¹

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Ratio of temperature differences

e−14k = 257/391

Solve for k

k = ln(391/257)/14 = 0.02997 min⁻¹

Answer

k = 0.02997 min⁻¹
8.Differential equations

Answer: m = 8.884 kg

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Set up the equation

dm/dt = 20·0.05 − (20/200)·m = 1 − 0.1·m

Solve

The integrating factor is ert/V; the solution approaches the equilibrium c·V.

m(t) = 10 + (−5)·e−t/10

Substitute t

m(15) = 10 + (−5)·0.2231 = 8.884 kg

Answer

m = 8.884 kg

ExamProblems · examproblems.com/courses/calculus-2