Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy02

Evaluate I = ∫02 2x·(x² + 1)3 dx.

f(x) = 2x·(x² + 1)3[0, 2]
I =
2.IntegralsHard
xy2.5y = x²eˣ

Evaluate I = ∫₀2.5 x²·eˣ dx.

∫₀2.5 x²eˣ dx
I =
3.Sequences & seriesMedium
AΣ 3ᵏ/k³k = 1 … ∞BΣ (5/3)ᵏk = 1 … ∞CΣ 1/(3k + 4)k = 1 … ∞DΣ k²/5ᵏk = 1 … ∞

Exactly one of the four series converges. Click it.

A: Σ 3ᵏ/k³B: Σ (5/3)ᵏC: Σ 1/(3k + 4)D: Σ k²/5ᵏ
  1. 1A: Σ 3ᵏ/k³
  2. 2B: Σ (5/3)ᵏ
  3. 3C: Σ 1/(3k + 4)
  4. 4D: Σ k²/5ᵏ
4.Sequences & seriesHard
xyfP₂−1

Use the Maclaurin polynomial of degree 2 of f(x) = cos x to approximate f(−1). Give P₂(−1).

f(x) = cos xn = 2x = −1
P₂(−1) =
5.Multivariable calculusMedium
xy−2−2∇fP

For f(x, y) = −4xy − x³ − 3y³, find the maximum rate of change of f at the point (−2, −2), that is |∇f|.

f(x, y) = −4xy − x³ − 3y³P = (−2, −2)
|∇f| =
6.Multivariable calculusHard
xyy = 2y = x22

The integral I = ∫02 ∫x2 1/(1 + y²)² dy dx cannot be done in this order. Reverse the order of integration and evaluate it.

f = 1/(1 + y²)²0 ≤ x ≤ y ≤ 2
I =
7.Differential equationsMedium
tyy(0) = 2y(1.5) = ?

Solve y″ + 3y′ + 2y = 0 with y(0) = 2 and y′(0) = 2. Find y(1.5).

y″ + 3y′ + 2y = 0y(0) = 2y′(0) = 2
y(1.5) =
8.Differential equationsHard
tyK = 10y(0.5) = ?

A system obeys y″ + y′ + 16.25y = 162.5 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find y(0.5); angles in radians.

y″ + y′ + 16.25y = 162.5y(0) = 0y′(0) = 0
y(0.5) =

3Solutions

1.Integrals

Answer: I = 156

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Substitution

u = x² + 1, du = 2x dx
I = ∫15 u3 du

Integrate and evaluate

I = [u4/4]15 = (625 − 1)/4 = 156

Answer

I = 156
2.Integrals

Answer: I = 37.59

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

First round

∫x²eˣ dx = x²eˣ − ∫2x eˣ dx

Second round

∫2x eˣ dx = 2x eˣ − 2eˣ
∫x²eˣ dx = eˣ(x² − 2x + 2)

Limits

12.18·(3.25) − 1·2 = 37.59

Answer

I = 37.59
3.Sequences & series

Answer: D: Σ k²/5ᵏ

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Test each series

A: Σ 3ᵏ/k³ → Ratio test: L = 3 > 1, diverges.
B: Σ (5/3)ᵏ → Geometric with r = 5/3 > 1: the terms grow, so it diverges.
C: Σ 1/(3k + 4) → Behaves like 1/(3k) for large k; compared with the harmonic series it diverges.
D: Σ k²/5ᵏ → Ratio test: L = 1/5 < 1, converges.

The answer

D: Σ k²/5ᵏ

Answer

D: Σ k²/5ᵏ
4.Sequences & series

Answer: P₂(−1) = 0.5

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Maclaurin polynomial

P₂(x) = 1 − 0.5x²

Substitute

P₂(−1) = 1 − 0.5 = 0.5

Answer

P₂(−1) = 0.5

The exact value is f(−1) = 0.540302; the error 0.0403023 shrinks when you take more terms or a point closer to 0.

5.Multivariable calculus

Answer: |∇f| = 28.28

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Partial derivatives

fx = −4y − 3x² → fx(−2, −2) = −4
fy = −4x − 9y² → fy(−2, −2) = −28

Length of the gradient

|∇f| = √((−4)² + (−28)²) = 28.28

Answer

|∇f| = 28.28
6.Multivariable calculus

Answer: I = 0.4

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Region

0 ≤ x ≤ y, 0 ≤ y ≤ 2

Reversed order

I = ∫02 ∫0y 1/(1 + y²)² dx dy = ∫02 y·1/(1 + y²)² dy

Substitution u = y²

I = [−1/(2(1 + y²))]02 = 0.4

Answer

I = 0.4
7.Differential equations

Answer: y(1.5) = 1.14

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Characteristic roots

(r + 1)(r + 2) = 0 → r = −1, −2

Constants from the initial values

A + B = 2, −1A − 2B = 2
A = 6, B = −4

Evaluate

y(1.5) = 6·e−1.5 + (−4)·e−3 = 1.14

Answer

y(1.5) = 1.14
8.Differential equations

Answer: y(0.5) = 12.36

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Steady value and roots

yss = 10, r = −0.5 ± 4j

Constants from the initial values

y(0) = 10 + A = 0 → A = −10
y′(0) = −0.5A + 4B = 0 → B = −1.25

Evaluate

y(0.5) = 10·(1 − e−0.25(cos 2 + 0.125·sin 2)) = 12.36

Answer

y(0.5) = 12.36

ExamProblems · examproblems.com/courses/calculus-2