Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy210

Evaluate I = ∫210 1/x dx.

f(x) = 1/x[2, 10]
I =
2.IntegralsHard
xy0.5y = x²eˣ

Evaluate I = ∫₀0.5 x²·eˣ dx.

∫₀0.5 x²eˣ dx
I =
3.Sequences & seriesMedium
k|aₖ₊₁/aₖ|123456789101112

Apply the ratio test to Σk=1∞ k³·5ᵏ/3ᵏ. Find L = lim |ak+1/ak|.

ak = k³·5ᵏ/3ᵏ
L =
4.Sequences & seriesHard
xyfP₂−0.5

Use the Maclaurin polynomial of degree 2 of f(x) = cos(2x) to approximate f(−0.5). Give P₂(−0.5).

f(x) = cos(2x)n = 2x = −0.5
P₂(−0.5) =
5.Multivariable calculusMedium

z = −x²y + x² + 3y³ + 3xy with x = 2t + 1 and y = 2t² + 2. Use the chain rule to find dz/dt at t = 1.

z = −x²y + x² + 3y³ + 3xyx = 2t + 1y = 2t² + 2t = 1
dz/dt =
6.Multivariable calculusHard
xyx = 1.2y = x1.2

The integral I = ∫01.2 ∫y1.2 cos(x²) dx dy cannot be done in this order. Reverse the order of integration and evaluate it.

f = cos(x²)0 ≤ y ≤ x ≤ 1.2
I =
7.Differential equationsMedium
t (min)T (°C)7Ta​66 °C

A cup of coffee at 84 °C is left in a room at 22 °C. After 7 min its temperature is 66 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). Find the constant k in min⁻¹.

T0 = 84 °CTa = 22 °CT(7) = 66 °C
k = min⁻¹
8.Differential equationsHard
xy12(1, 2)y(2) = ?

Solve the initial value problem y′ + 3y/x = 2x2 for x > 0, with y(1) = 2. Find y(2).

y′ + 3y/x = 2x2y(1) = 2
y(2) =

3Solutions

1.Integrals

Answer: I = 1.609

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = ln x

Evaluate at the limits

I = (ln 10 − ln 2) = ln 5 = 1.609

Answer

I = 1.609
2.Integrals

Answer: I = 0.0609

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

First round

∫x²eˣ dx = x²eˣ − ∫2x eˣ dx

Second round

∫2x eˣ dx = 2x eˣ − 2eˣ
∫x²eˣ dx = eˣ(x² − 2x + 2)

Limits

1.649·(1.25) − 1·2 = 0.0609

Answer

I = 0.0609
3.Sequences & series

Answer: L = 1.667

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Ratio of consecutive terms

|ak+1/ak| = ((k + 1)/k)³·5/3 → 5/3

Conclusion

L = 1.667 > 1

Answer

L = 1.667

L > 1, so the series diverges.

4.Sequences & series

Answer: P₂(−0.5) = 0.5

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Maclaurin polynomial

P₂(x) = 1 − 2x²

Substitute

P₂(−0.5) = 1 − 0.5 = 0.5

Answer

P₂(−0.5) = 0.5

The exact value is f(−0.5) = 0.540302; the error 0.0403023 shrinks when you take more terms or a point closer to 0.

5.Multivariable calculus

Answer: dz/dt = 564

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Point and rates

x(1) = 3, y(1) = 4
dx/dt = 2, dy/dt = 4t = 4

Partial derivatives

fx = −2xy + 2x + 3y = −6
fy = −x² + 9y² + 3x = 144

Chain rule

dz/dt = (−6)·2 + 144·4 = 564

Answer

dz/dt = 564
6.Multivariable calculus

Answer: I = 0.4957

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Region

0 ≤ y ≤ x, 0 ≤ x ≤ 1.2

Reversed order

I = ∫01.2 ∫0x cos(x²) dy dx = ∫01.2 x·cos(x²) dx

Substitution u = x²

I = [sin(x²)/2]01.2 = 0.4957

Answer

I = 0.4957
7.Differential equations

Answer: k = 0.04899 min⁻¹

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Ratio of temperature differences

e−7k = 44/62

Solve for k

k = ln(62/44)/7 = 0.04899 min⁻¹

Answer

k = 0.04899 min⁻¹
8.Differential equations

Answer: y(2) = 2.875

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e∫3/x dx = x3

Integrate

(x3y)′ = 2x5 → x3y = 2x6/6 + C

Initial condition

2 = 2/6 + C → C = 1.667

Evaluate

y(2) = (2·26/6 + 1.667)/23 = 2.875

Answer

y(2) = 2.875

ExamProblems · examproblems.com/courses/calculus-2