Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy13

Evaluate I = ∫13 3/x dx.

f(x) = 3/x[1, 3]
I =
2.IntegralsHard
xy−33

Find the area A of the region between the parabola y = 9 − x² and the x-axis.

y = 9 − x²
A =
3.Sequences & seriesMedium
AΣ (1/2)ᵏk = 1 … ∞BΣ (−1)ᵏ/kk = 1 … ∞CΣ 1/(k² + 3)k = 1 … ∞DΣ (7/4)ᵏk = 1 … ∞

Exactly one of the four series diverges. Click it.

A: Σ (1/2)ᵏB: Σ (−1)ᵏ/kC: Σ 1/(k² + 3)D: Σ (7/4)ᵏ
  1. 1A: Σ (1/2)ᵏ
  2. 2B: Σ (−1)ᵏ/k
  3. 3C: Σ 1/(k² + 3)
  4. 4D: Σ (7/4)ᵏ
4.Sequences & seriesHard

Find the coefficient c₃ of (x − 2)³ in the Taylor series of f(x) = 1/x about a = 2.

f(x) = 1/xa = 2k = 3
c₃ =
5.Multivariable calculusMedium
xy−4−20−20vP

For f(x, y) = 2xy³ − 4x² − 3y² + xy, find the directional derivative Duf at (−1, −1) in the direction of v = (−4, 2).

f(x, y) = 2xy³ − 4x² − 3y² + xyP = (−1, −1)v = (−4, 2)
Duf =
6.Multivariable calculusHard
xy−202−202(0, 0)(2, 2)(−2, −2)

Find the critical points of f(x, y) = x⁴ + y⁴ − 16xy, classify them, and give the value fmin of f at its local minimum.

f(x, y) = x⁴ + y⁴ − 16xy
fmin =
7.Differential equationsMedium
t (min)T (°C)12Ta​T = ?

A cup of coffee at 85 °C is left in a room at 20 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.12 min⁻¹, find its temperature T after 12 min.

T0 = 85 °CTa = 20 °Ck = 0.12 min⁻¹t = 12 min
T = °C
8.Differential equationsHard
xy13(1, −1)y(3) = ?

Solve the initial value problem y′ + 3y/x = 6x2 for x > 0, with y(1) = −1. Find y(3).

y′ + 3y/x = 6x2y(1) = −1
y(3) =

3Solutions

1.Integrals

Answer: I = 3.296

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = 3·ln x

Evaluate at the limits

I = 3·(ln 3 − ln 1) = 3·ln 3 = 3.296

Answer

I = 3.296
2.Integrals

Answer: A = 36

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Zeros

9 − x² = 0 → x = ±3

Integrate

A = [9x − x³/3]−33 = 18 − (−18) = 36

Answer

A = 36
3.Sequences & series

Answer: D: Σ (7/4)ᵏ

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Test each series

A: Σ (1/2)ᵏ → Geometric with r = 1/2, |r| < 1: converges.
B: Σ (−1)ᵏ/k → Alternating, with 1/k decreasing to 0: converges (conditionally).
C: Σ 1/(k² + 3) → Smaller than 1/k², a convergent p-series: converges by comparison.
D: Σ (7/4)ᵏ → Geometric with r = 7/4 > 1: the terms grow, so it diverges.

The answer

D: Σ (7/4)ᵏ

Answer

D: Σ (7/4)ᵏ
4.Sequences & series

Answer: c₃ = −0.0625

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Derivative f⁽³⁾

f⁽³⁾(x) = −6/x⁴

Coefficient

c₃ = −6/(2⁴·6) = −0.0625
c₃ = −0.0625

Answer

c₃ = −0.0625
5.Multivariable calculus

Answer: Duf = −4.919

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Gradient at the point

fx = 2y³ − 8x + y → fx(−1, −1) = 5
fy = 6xy² − 6y + x → fy(−1, −1) = −1

Unit vector

|v| = √((−4)² + 2²) = 4.472
u = (−0.8944, 0.4472)

Dot product

Duf = 5·(−0.8944) + (−1)·0.4472 = −4.919

Answer

Duf = −4.919
6.Multivariable calculus

Answer: fmin = −32

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Critical points

Solve fx = 0 and fy = 0 together.

fx = 4x³ − 16y = 0
fy = 4y³ − 16x = 0
(0, 0), (2, 2), (−2, −2)

Second-derivative test

(0, 0): fxx = 0, fyy = 0, fxy = −16, D = −256 → saddle point
(2, 2): fxx = 48, fyy = 48, fxy = −16, D = 2048 → local minimum
(−2, −2): fxx = 48, fyy = 48, fxy = −16, D = 2048 → local minimum

Value at the extremum

f(−2, −2) = −32

Answer

fmin = −32
7.Differential equations

Answer: T = 35.4 °C

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Solution of the cooling law

T(t) = 20 + 65·e−0.12t

Substitute t

T(12) = 20 + 65·0.2369 = 35.4 °C

Answer

T = 35.4 °C
8.Differential equations

Answer: y(3) = 26.93

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e∫3/x dx = x3

Integrate

(x3y)′ = 6x5 → x3y = 6x6/6 + C

Initial condition

−1 = 6/6 + C → C = −2

Evaluate

y(3) = (6·36/6 + (−2))/33 = 26.93

Answer

y(3) = 26.93

ExamProblems · examproblems.com/courses/calculus-2