Calculus 2: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

2Practice problems

1.IntegralsMedium
xy1y = √(4x)

The region under y = √(4x) from x = 0 to x = 1 is rotated about the x-axis. Find the volume V of the solid (a paraboloid).

y = √(4x)0 ≤ x ≤ 1
V =
2.IntegralsHard
xy4y = 2xy = 0.5x²

The region between the line y = 2x and the parabola y = 0.5x² is rotated about the x-axis. Find the volume V of the solid.

y = 2xy = 0.5x²
V =
3.Sequences & seriesMedium
kSn​12345678910S = ?

Find the sum S = Σk=1∞ 4/(k(k + 2)).

ak = 4/(k(k + 2))
S =
4.Sequences & seriesHard

f(x) = ln(1 + x) is approximated by its Maclaurin polynomial of degree 4 at x = 0.5. Use the Lagrange error bound M·|x|ⁿ⁺¹/(n + 1)! with M = 4! = 24 to find the largest possible error |R₄|.

f(x) = ln(1 + x)n = 4x = 0.5M = 24
|R₄| =
5.Multivariable calculusMedium
xy22∇fP

For f(x, y) = −4x³y³ + 2x² + xy, find the maximum rate of change of f at the point (2, 2), that is |∇f|.

f(x, y) = −4x³y³ + 2x² + xyP = (2, 2)
|∇f| =
6.Multivariable calculusHard
xyx = 4y = 0.5x42

Evaluate I = ∬T (4x − 2y) dA over the triangle T bounded by y = 0, x = 4 and y = 0.5x.

f = 4x − 2y0 ≤ x ≤ 40 ≤ y ≤ 0.5x
I =
7.Differential equationsMedium
t (min)T (°C)11Ta​17 °C

A can of soda at 4 °C is taken out of the fridge into a room at 26 °C. After 11 min its temperature is 17 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). Find the constant k in min⁻¹.

T0 = 4 °CTa = 26 °CT(11) = 17 °C
k = min⁻¹
8.Differential equationsHard
t (min)m (kg)70 minm = ?

A tank holds 1000 L of water in which 5 kg of salt is dissolved. Brine with 0.05 kg of salt per litre flows in at 20 L/min, and the well-mixed solution flows out at the same rate. How much salt m is in the tank after 70 min?

V = 1000 Lm0 = 5 kgc = 0.05 kg/Lr = 20 L/min
m = kg

3Solutions

1.Integrals

Answer: V = 6.283

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Disc method

V = π∫₀1 4x dx

Integrate

V = π·4·1²/2 = 6.283

Answer

V = 6.283
2.Integrals

Answer: V = 107.2

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Intersection points

2x = 0.5x² → x = 0, x = 4

Washer method

V = π∫₀4 ((2x)² − (0.5x²)²) dx

Integrate

V = π(4·4³/3 − 0.25·4⁵/5) = π·34.13 = 107.2

Answer

V = 107.2
3.Sequences & series

Answer: S = 3

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Partial fractions

4/(k(k + 2)) = (4/2)·(1/k − 1/(k + 2))

Cancel

S = (4/2)·(1 + 1/2) = 3

Answer

S = 3
4.Sequences & series

Answer: |R₄| = 0.00625

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Bound on the derivative

M = 4! = 24

Lagrange bound

|R₄| ≤ 24·0.5⁵/5! = 0.00625

Answer

|R₄| = 0.00625

The true error is smaller: |f(0.5) − P₄(0.5)| = 0.004423.

5.Multivariable calculus

Answer: |∇f| = 534.6

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Partial derivatives

fx = −12x²y³ + 4x + y → fx(2, 2) = −374
fy = −12x³y² + x → fy(2, 2) = −382

Length of the gradient

|∇f| = √((−374)² + (−382)²) = 534.6

Answer

|∇f| = 534.6
6.Multivariable calculus

Answer: I = 37.33

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Limits

0 ≤ x ≤ 4, 0 ≤ y ≤ 0.5x

Inner integral

∫00.5x (4x − 2y) dy = 4x·0.5x − 2·(0.5x)²/2 = 1.75x²

Outer integral

I = 1.75·4³/3 = 37.33

Answer

I = 37.33
7.Differential equations

Answer: k = 0.08126 min⁻¹

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Ratio of temperature differences

e−11k = -9/-22

Solve for k

k = ln(-22/-9)/11 = 0.08126 min⁻¹

Answer

k = 0.08126 min⁻¹
8.Differential equations

Answer: m = 38.9 kg

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Set up the equation

dm/dt = 20·0.05 − (20/1000)·m = 1 − 0.02·m

Solve

The integrating factor is ert/V; the solution approaches the equilibrium c·V.

m(t) = 50 + (−45)·e−t/50

Substitute t

m(70) = 50 + (−45)·0.2466 = 38.9 kg

Answer

m = 38.9 kg

ExamProblems · examproblems.com/courses/calculus-2