Circuit Analysis 2: AC circuits: cram pack

Formula sheets, the key method steps for every topic and 16 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

AC impedance & phasors

Impedances
ZR = R, ZL = jωL, ZC = 1/(jωC)
Angular frequency
ω = 2πf
Magnitude and angle
|Z| = √(R² + X²), φ = atan(X/R)
Phasor Ohm’s law
V = I·Z

Method

  1. Convert the frequency: ω = 2πf.
  2. Find each reactance: XL = ωL and XC = 1/(ωC).
  3. Add impedances like resistors, with Z = R + jX.
  4. Find the magnitude |Z| = √(R² + X²) and the angle φ = atan(X/R), then use Ohm’s law with phasors.

AC power & power factor

Real power
P = V·I·cos φ
Reactive power
Q = V·I·sin φ
Apparent power
S = V·I = √(P² + Q²)
Power factor
pf = cos φ = P/S
Correction capacitor
QC = P(tan φ1 − tan φ2), C = QC/(ωV²)

LC resonance, Q factor & bandwidth

Natural frequency
ω0 = 1/√(LC), f0 = 1/(2π√(LC))
Energy
W = ½CV0² = ½Cv² + ½Li²
Peak current
Imax = V0√(C/L)
Quality factor
Q = 2π·(energy stored)/(energy lost per cycle)
Series RLC
Q = (1/R)√(L/C), BW = R/(2πL)
Parallel RLC
Q = R√(C/L), BW = 1/(2πRC)
Bandwidth
BW = f2 − f1 = f0/Q, f0 = √(f1f2)
Half-power frequencies
f1,2 = f0(√(1 + 1/(4Q²)) ∓ 1/(2Q))
Tank with coil resistance r
RD = L/(C·r) = Q²·r
Decay of the amplitude
e−Rt/(2L)

Method

  1. Find the resonance frequency first: ω₀ = 1/√(LC) and f₀ = ω₀/(2π).
  2. Decide whether the circuit is series or parallel: series Q = (1/R)√(L/C), parallel Q = R√(C/L).
  3. Use BW = f₀/Q for the bandwidth, or the shortcuts R/(2πL) (series) and 1/(2πRC) (parallel).
  4. For energy questions, use that the total energy ½CV₀² stays constant in an ideal LC circuit and swings between C and L every quarter period.

Three-phase power

Y connection
VL = √3·Vph, IL = Iph
Δ connection
VL = Vph, IL = √3·Iph
Total real power
P = √3·VL·IL·cos φ = 3·Iph²·R
Apparent and reactive power
S = √3·VL·IL, Q = P·tan φ
Correction capacitors
QC = P(tan φ1 − tan φ2), C = QC/(3ωV²)
Voltage across each capacitor
Δ: VL Y: VL/√3
Motor input
Pin = Pout/η

RC & RL transients

Time constant
τ = RC | τ = L/R
Response
x(t) = x(∞) + [x(0) − x(∞)]·e−t/τ
Capacitor at DC
open circuit; vC cannot jump
Inductor at DC
short circuit; iL cannot jump
Settled
t ≈ 5τ

Method

  1. Find the initial value just after switching: a capacitor voltage and an inductor current cannot jump.
  2. Find the final value long after switching: a capacitor acts as an open circuit, an inductor as a short circuit.
  3. Find the time constant: τ = RC or τ = L/R, using the resistance seen by the capacitor or inductor.
  4. Use x(t) = x(∞) + [x(0) − x(∞)]·e−t/τ.

Thévenin & Norton

Thévenin voltage
Vth = Vopen circuit
Thévenin resistance
Rth: all sources off, seen from a–b
Norton current
IN = Vth/Rth
Load current
IL = Vth/(Rth + RL)
Maximum power transfer
RL = Rth, Pmax = Vth²/(4Rth)

Method

  1. Remove the load and mark the two terminals a and b.
  2. Find the open-circuit voltage between a and b: this is Vth.
  3. Switch off all independent sources and find the resistance seen from a–b: this is Rth.
  4. Put the load back on the equivalent circuit: Vth in series with Rth.
  5. For the Norton equivalent, convert: IN = Vth/Rth, with RN = Rth in parallel.

2Practice problems

1.Complex numbersMedium
ReIm55−5−5θz

Find the argument θ of z = 8 + j5 in degrees, as the principal value between −180° and 180°.

z = 8 + j5
θ = °
2.Complex numbersHard
ReIm11−1−122−2−2z₀z₁z₂z₃z₄z₅

The roots of zⁿ = w with n = 6 and w = 64∠90° are zk = R1/n∠((φ + 360°·k)/n), k = 0, 1, …, 5. Find the imaginary part of z₄.

w = 64∠90°n = 6k = 4
Im(z₄) =
3.AC impedance & phasorsMedium
50 V500 HzR = 40 ΩL = 150 mHC = 10 µF

A series RLC circuit is connected to a 50 V (rms), 500 Hz supply. Find the phase angle φ of the impedance, in degrees (positive when the current lags the voltage).

V = 50 V (rms)f = 500 HzR = 40 ΩL = 150 mHC = 10 µF
φ = °
4.AC impedance & phasorsHard
100 V500 HzR = 30 ΩL = 20 mHC = 4.7 µF+−VC​

A series RLC circuit is connected to a 100 V (rms), 500 Hz supply. Find the rms voltage VC across the capacitor.

V = 100 V (rms)f = 500 HzR = 30 ΩL = 20 mHC = 4.7 µF
VC = V
5.AC power & power factorMedium
240 VZ7 + j24 ΩI

A load with impedance Z = 7 + j24 Ω is connected to a 240 V (rms) single-phase supply. Find the reactive power Q it absorbs.

V = 240 VZ = 7 + j24 Ω
Q = var
6.AC power & power factorHard
P1​ = 44 kWQ1​S1​φ

A 200 kVA single-phase transformer supplies a load of 44 kW at a power factor of 0.6 lagging. How much extra real power ΔP can be added as a resistive (unity power factor) load before the transformer reaches its kVA rating?

Smax = 200 kVAP1 = 44 kWpf1 = 0.6
ΔP = kW
7.LC resonance, Q factor & bandwidthMedium
V47 kΩ100 mH4.7 nF

A parallel RLC circuit has R = 47 kΩ, L = 100 mH and C = 4.7 nF. Find its quality factor Q.

R = 47 kΩL = 100 mHC = 4.7 nF
Q =
8.LC resonance, Q factor & bandwidthHard
C = 220 pFR = 5 ΩL = 470 µH

A charged 220 pF capacitor discharges through a 470 µH coil with a total series resistance of 5 Ω, so the oscillation slowly dies out. Its amplitude decays as e−Rt/(2L). How many oscillation cycles n pass before the amplitude has halved? (The losses are small, so the frequency is f₀.)

L = 470 µHC = 220 pFR = 5 Ω
n =
9.Three-phase powerMedium
ABCVL​ = 480 VIL​ = ?M90 kW, η = 95%cos φ = 0.85

A three-phase induction motor delivers 90 kW of mechanical output power at full load. At this load its efficiency is 95% and its power factor is 0.85 lagging. The supply has a line-to-line voltage of 480 V. Find the line current IL.

Pout = 90 kWη = 95%cos φ = 0.85VL = 480 V
IL = A
10.Three-phase powerHard
P = 150 kWφ1​S1​Q2​QC​

A balanced three-phase load takes 150 kW at a power factor of 0.8 lagging from a 480 V (line-to-line), 50 Hz supply. A three-phase capacitor bank in parallel with the load must raise the overall power factor to 0.9 lagging. The real power stays the same. The capacitors are connected in Y. Find the capacitance Cph of each capacitor in µF.

P = 150 kWpf1 = 0.8pf2 = 0.9VL = 480 Vf = 50 Hz
Cph = µF
11.RC & RL transientsMedium
R = 68 Ωt = 0L33 mHi(t)

The inductor carries a steady current of 3 A. At t = 0 the switch closes the loop through R and the source is removed, so the inductor current decays through R. How long does it take for the current to fall to 0.3 A? Find t.

i(0) = 3 AR = 68 ΩL = 33 mH
t = ms
12.RC & RL transientsHard
+−Vs​15 Vt = 0R = 100 kΩC?+−vC​

A timer starts charging an uncharged capacitor through a resistor from a 15 V supply at t = 0. It must trigger when the capacitor voltage reaches 12 V, exactly 25 ms after the start. With R = 100 kΩ, find the capacitance C needed.

Vs = 15 VVth = 12 VT = 25 msR = 100 kΩ
C = µF
13.Thévenin & NortonMedium
R1​ = 6 ΩR3​ = 10 Ω+−V1​12 VR2​6 ΩAab

Find the Thévenin resistance Rth seen from terminals a–b.

V1 = 12 VR1 = 6 ΩR2 = 6 ΩR3 = 10 Ω
Rth = Ω
14.Thévenin & NortonHard
R1​ = 5 ΩR3​ = 15 Ω+−V1​36 VR2​8 ΩAIs​2 ABRL​6 ΩIL​

A load RL = 6 Ω is connected across a–b. Replace the rest of the circuit with its Thévenin equivalent and find the load current IL.

V1 = 36 VIs = 2 AR1 = 5 ΩR2 = 8 ΩR3 = 15 ΩRL = 6 Ω
IL = A
15.Bode plots & marginsMedium
vin​R = 22 kΩC = 10 nFvout​

The RC low-pass filter shown has R = 22 kΩ, C = 10 nF. A sinusoidal input of 3.6 kHz is applied. Find the gain |H| = |vout/vin| in dB.

R = 22 kΩC = 10 nFf = 3.6 kHz
|H| = dB
16.Bode plots & marginsHard
|H| (dB)0.10.111101010010010001000−60−40−200204060ω (rad/s)φ (°)ω (rad/s)−180−135−90−450ωc​

A unity-feedback loop has the open-loop transfer function L(s) = 600/(s(s + 8)). Find the phase margin PM in degrees.

L(s) = 600/(s(s + 8))
PM = °

3Solutions

1.Complex numbers

Answer: θ = 32.01 °

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Quadrant

a = 8, b = 5 → I

Reference angle

α = atan(5/8) = 32.01°

Argument

θ = α = 32.01°

Answer

θ = 32.01°

In polar form z = 9.434∠32.01°.

2.Complex numbers

Answer: Im(z₄) = −1.932

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Modulus of the roots

641/6 = 2

Argument of the root

θ₄ = (90° + 360°·4)/6 = 255° → −105°

Rectangular form

z₄ = 2·(cos −105° + j sin −105°) = −0.5176 − j1.932
Im(z₄) = −1.932

Answer

Im(z₄) = −1.932

The 6 roots lie on the circle of radius 2, 60° apart.

3.AC impedance & phasors

Answer: φ = 84.8 °

AC circuits with phasors: resistors, inductors and capacitors have impedances R, jωL and 1/(jωC), with ω = 2πf. In series, impedances add like resistances, but as complex numbers. Rms current and voltage follow Ohm’s law with |Z|.

Reactances

ω = 2πf = 2π·500 = 3142 rad/s
XL = ωL = 3142·0.15 = 471.2 Ω
XC = 1/(ωC) = 1/(3142·10·10⁻⁶) = 31.83 Ω

Impedance

In series the impedances add as complex numbers: Z = R + j(XL − XC).

|Z| = √(R² + (XL − XC)²) = √(40² + (439.4)²) = 441.2 Ω

Phase angle

φ = arctan((XL − XC)/R) = arctan(439.4/40) = 84.8°

Answer

φ = 84.8°
4.AC impedance & phasors

Answer: VC = 222.8 V

AC circuits with phasors: resistors, inductors and capacitors have impedances R, jωL and 1/(jωC), with ω = 2πf. In series, impedances add like resistances, but as complex numbers. Rms current and voltage follow Ohm’s law with |Z|.

Reactances

ω = 2πf = 2π·500 = 3142 rad/s
XL = ωL = 3142·0.02 = 62.83 Ω
XC = 1/(ωC) = 1/(3142·4.7·10⁻⁶) = 67.73 Ω

Impedance

In series the impedances add as complex numbers: Z = R + j(XL − XC).

|Z| = √(R² + (XL − XC)²) = √(30² + (−4.894)²) = 30.4 Ω

Current

The same current flows through every element of a series circuit.

I = V/|Z| = 100/30.4 = 3.29 A

Voltage across the capacitor

VC = I·XC = 3.29·67.73 = 222.8 V

Answer

VC = 222.8 V
5.AC power & power factor

Answer: Q = 2212 var

AC power: apparent power S = V·I (VA) splits into real power P = S·cos φ (W), which does useful work, and reactive power Q = S·sin φ (var), which moves back and forth between source and load. The power factor is cos φ. A capacitor in parallel supplies reactive power locally, so the line current drops for the same real power.

Current

|Z| = √(7² + 24²) = 25 Ω
I = V/|Z| = 240/25 = 9.6 A

Reactive power

Q = I²·X = 9.6²·24 = 2212 var

Answer

Q = 2212 var
6.AC power & power factor

Answer: ΔP = 147.2 kW

AC power: apparent power S = V·I (VA) splits into real power P = S·cos φ (W), which does useful work, and reactive power Q = S·sin φ (var), which moves back and forth between source and load. The power factor is cos φ. A capacitor in parallel supplies reactive power locally, so the line current drops for the same real power.

Reactive power of the existing load

Q1 = 44·tan(arccos 0.6) = 58.67 kvar

Largest total real power

At full rating S = Smax, and Q is unchanged by the resistive load.

P = √(Smax² − Q1²) = √(200² − 58.67²) = 191.2 kW

Extra real power

ΔP = 191.2 − 44 = 147.2 kW

Answer

ΔP = 147.2 kW
7.LC resonance, Q factor & bandwidth

Answer: Q = 10.19

Q factor and bandwidth: in a resonant circuit Q = 2π·(energy stored)/(energy lost per cycle). For series RLC Q = ω0L/R = (1/R)√(L/C); for parallel RLC Q = R/(ω0L) = R√(C/L). The bandwidth between the half-power frequencies f1 and f2 (where the power is half and the current or voltage 1/√2 of its peak) is BW = f2 − f1 = f0/Q, which is R/(2πL) in series and 1/(2πRC) in parallel. The resonance frequency is the geometric mean f0 = √(f1f2), and f1,2 = f0(√(1 + 1/(4Q²)) ∓ 1/(2Q)). Losses also make the oscillation decay: in series RLC the amplitude falls as e−Rt/(2L).

Resonance frequency

ω₀ = 1/√(LC) = 46127 rad/s

Quality factor

Q = R/(ω₀L) = 47000/(46127·0.1) = 10.19

Answer

Q = 10.19

The bandwidth is 1/(2πRC) = 720.5 Hz.

8.LC resonance, Q factor & bandwidth

Answer: n = 64.5

Q factor and bandwidth: in a resonant circuit Q = 2π·(energy stored)/(energy lost per cycle). For series RLC Q = ω0L/R = (1/R)√(L/C); for parallel RLC Q = R/(ω0L) = R√(C/L). The bandwidth between the half-power frequencies f1 and f2 (where the power is half and the current or voltage 1/√2 of its peak) is BW = f2 − f1 = f0/Q, which is R/(2πL) in series and 1/(2πRC) in parallel. The resonance frequency is the geometric mean f0 = √(f1f2), and f1,2 = f0(√(1 + 1/(4Q²)) ∓ 1/(2Q)). Losses also make the oscillation decay: in series RLC the amplitude falls as e−Rt/(2L).

Half-life of the amplitude

t = 2·0.00047·ln 2/5 = 0.0001303 s

Number of cycles

n = t·f0 = 0.0001303·494948 = 64.5

Answer

n = 64.5

Shortcut: n = Q·ln 2/π with Q = 292.3.

9.Three-phase power

Answer: IL = 134.1 A

Balanced three-phase systems: in a Y (star) connection the line-to-line voltage is √3 times the phase voltage, VL = √3·Vph, and the line current equals the phase current. In a Δ (delta) connection the line-to-line voltage equals the phase voltage and the line current is √3 times the phase current, IL = √3·Iph. The total power is three times the power of one phase: P = 3·Vph·Iph·cos φ = √3·VL·IL·cos φ.

Electrical input power

Pin = Pout/η = 90/0.95 = 94.74 kW

Line current

IL = Pin/(√3·VL·cos φ) = 94737/(√3·480·0.85) = 134.1 A

Answer

IL = 134.1 A
10.Three-phase power

Answer: Cph = 550.6 µF

Balanced three-phase systems: in a Y (star) connection the line-to-line voltage is √3 times the phase voltage, VL = √3·Vph, and the line current equals the phase current. In a Δ (delta) connection the line-to-line voltage equals the phase voltage and the line current is √3 times the phase current, IL = √3·Iph. The total power is three times the power of one phase: P = 3·Vph·Iph·cos φ = √3·VL·IL·cos φ. Power factor correction: capacitors supply reactive power locally, QC = P·(tan φ1 − tan φ2). Each of the three capacitors supplies QC/3 = V²·ω·C, where V is the voltage across that capacitor: VL in a Δ bank, VL/√3 in a Y bank.

Reactive power before and after

The real power is unchanged, so each power factor fixes the reactive power: Q = P·tan φ.

Q1 = 150·tan(acos 0.8) = 150·0.75 = 112.5 kvar
Q2 = 150·tan(acos 0.9) = 150·0.4843 = 72.65 kvar

Reactive power from the capacitors

QC = Q1 − Q2 = 39.85 kvar

Capacitance per phase

In a Y bank each capacitor is connected between a line and the star point.

V = 480/√3 = 277.1 V, ω = 2π·50 = 314.2 rad/s
Cph = (QC/3)/(ω·V²) = 13284/(314.2·277.1²) = 550.6 µF

Answer

Cph = 550.6 µF
11.RC & RL transients

Answer: t = 1.117 ms

First-order transients: in a circuit with one capacitor or one inductor, every voltage and current moves exponentially from its initial value to its final value: x(t) = x(∞) + [x(0) − x(∞)]·e−t/τ, with τ = RC or τ = L/R. After about 5τ the circuit has settled.

Time constant

τ = L/R = 33 mH / 68 Ω = 0.4853 ms

Solve for the time

0.3 = 3·e−t/τ → t = τ·ln(3/0.3)
t = 0.4853·ln(10) = 1.117 ms

Answer

t = 1.117 ms
12.RC & RL transients

Answer: C = 0.1553 µF

First-order transients: in a circuit with one capacitor or one inductor, every voltage and current moves exponentially from its initial value to its final value: x(t) = x(∞) + [x(0) − x(∞)]·e−t/τ, with τ = RC or τ = L/R. After about 5τ the circuit has settled.

Required time constant

12 = 15·(1 − e−25/τ) → τ = 25/ln(15/(15 − 12))
τ = 25/1.609 = 15.53 ms

Capacitance

kΩ times µF gives milliseconds.

C = τ/R = 15.53/100 = 0.1553 µF

Answer

C = 0.1553 µF
13.Thévenin & Norton

Answer: Rth = 13 Ω

Thévenin’s theorem: any linear two-terminal network behaves like a single voltage source Vth in series with a resistance Rth. Norton’s theorem gives the same network as a current source IN = Vth/Rth in parallel with Rth.

R1​ = 6 ΩR3​ = 10 ΩSHORTR2​6 ΩAabRth​

Find Rth with every source switched off

Replace voltage sources with shorts and current sources with opens, then look into the circuit from a–b.

R1 ∥ R2 = 6·6/(6+6) = 3 Ω
Rth = (R1 ∥ R2) + R3 = 3 + 10 = 13 Ω
14.Thévenin & Norton

Answer: IL = −0.5815 A

Thévenin’s theorem: any linear two-terminal network behaves like a single voltage source Vth in series with a resistance Rth. Norton’s theorem gives the same network as a current source IN = Vth/Rth in parallel with Rth.

R1​ = 5 ΩR3​ = 15 ΩSHORTR2​8 ΩAOPENBabRth​

Find Rth with every source switched off

Replace voltage sources with shorts and current sources with opens, then look into the circuit from a–b.

R1 ∥ R2 = 5·8/(5+8) = 3.077 Ω
Rth = (R1 ∥ R2) + R3 = 3.077 + 15 = 18.08 Ω
R1​ = 5 ΩR3​ = 15 Ω+−V1​36 VR2​8 ΩAIs​2 ABab+−Vth​

Find Vth, the open-circuit voltage

With a–b open, the only path for Iₛ is through R₃ into node A. Find V_A by superposition of V₁ and Iₛ, then add the drop across R₃.

VA = V1·R2/(R1+R2) + Is·(R1∥R2) = 22.15 + (−2)·3.077 = 16 V
Vth = VB = VA + Is·R3 = 16 + (−2)·15 = −14 V
Rth​ = 18.08 Ω−+Vth​14 VRL​6 ΩIL​

Connect the load to the Thévenin equivalent

The Thévenin source and R_th in series behave exactly like the original circuit at a–b, so the load sees a simple series loop.

IL = Vth/(Rth + RL) = −14/(18.08 + 6) = −0.5815 A
15.Bode plots & margins

Answer: |H| = −14.11 dB

Frequency response: substitute s = jω in the transfer function. The magnitude in decibels is 20·log₁₀|H(jω)| and the phase is the sum of the angles of the numerator factors minus those of the denominator factors. A first-order RC or RL filter has its corner (−3 dB) frequency at ωc = 1/(RC) or R/L, and fc = ωc/(2π); a low-pass filter gives |H| = 1/√(1 + (ω/ωc)²) and φ = −atan(ω/ωc). In the asymptotic (straight-line) Bode plot each pole bends the magnitude down by 20 dB/decade at its corner frequency, each zero bends it up by 20 dB/decade, and an integrator 1/s gives −20 dB/decade at all frequencies. Gain crossover ωc: |L(jω)| = 1 (0 dB); phase margin PM = 180° + ∠L(jωc). Phase crossover ω180: ∠L(jω) = −180°; gain margin GM = −20·log₁₀|L(jω180)| dB. The closed loop is stable when both margins are positive.

Corner frequency

ωc = 1/(RC) = 1/(22000·1 × 10⁻⁸) = 4545 rad/s
fc = 723.4 Hz → f/fc = 3600/723.4 = 4.976

Gain

|H| = 1/√(1 + 4.976²) = 0.197
20·log₁₀(0.197) = −14.11 dB

Answer

|H| = −14.11 dB
16.Bode plots & margins

Answer: PM = 18.54 °

Frequency response: substitute s = jω in the transfer function. The magnitude in decibels is 20·log₁₀|H(jω)| and the phase is the sum of the angles of the numerator factors minus those of the denominator factors. A first-order RC or RL filter has its corner (−3 dB) frequency at ωc = 1/(RC) or R/L, and fc = ωc/(2π); a low-pass filter gives |H| = 1/√(1 + (ω/ωc)²) and φ = −atan(ω/ωc). In the asymptotic (straight-line) Bode plot each pole bends the magnitude down by 20 dB/decade at its corner frequency, each zero bends it up by 20 dB/decade, and an integrator 1/s gives −20 dB/decade at all frequencies. Gain crossover ωc: |L(jω)| = 1 (0 dB); phase margin PM = 180° + ∠L(jωc). Phase crossover ω180: ∠L(jω) = −180°; gain margin GM = −20·log₁₀|L(jω180)| dB. The closed loop is stable when both margins are positive.

Gain crossover

ω⁴ + 64ω² − 360000 = 0
ω² = (−64 + √(4096 + 4·360000))/2 = 568.9
ωc = 23.85 rad/s

Phase margin

∠L(jωc) = −90° − atan(23.85/8) = −161.5°
PM = 180° + ∠L = 18.54°

Answer

PM = 18.54°

ExamProblems · examproblems.com/courses/circuit-analysis-2