Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).
AC impedance & phasors
Impedances
ZR = R, ZL = jωL, ZC = 1/(jωC)
Angular frequency
ω = 2πf
Magnitude and angle
|Z| = √(R² + X²), φ = atan(X/R)
Phasor Ohm’s law
V = I·Z
Method
Convert the frequency: ω = 2πf.
Find each reactance: XL = ωL and XC = 1/(ωC).
Add impedances like resistors, with Z = R + jX.
Find the magnitude |Z| = √(R² + X²) and the angle φ = atan(X/R), then use Ohm’s law with phasors.
AC power & power factor
Real power
P = V·I·cos φ
Reactive power
Q = V·I·sin φ
Apparent power
S = V·I = √(P² + Q²)
Power factor
pf = cos φ = P/S
Correction capacitor
QC = P(tan φ1 − tan φ2), C = QC/(ωV²)
LC resonance, Q factor & bandwidth
Natural frequency
ω0 = 1/√(LC), f0 = 1/(2π√(LC))
Energy
W = ½CV0² = ½Cv² + ½Li²
Peak current
Imax = V0√(C/L)
Quality factor
Q = 2π·(energy stored)/(energy lost per cycle)
Series RLC
Q = (1/R)√(L/C), BW = R/(2πL)
Parallel RLC
Q = R√(C/L), BW = 1/(2πRC)
Bandwidth
BW = f2 − f1 = f0/Q, f0 = √(f1f2)
Half-power frequencies
f1,2 = f0(√(1 + 1/(4Q²)) ∓ 1/(2Q))
Tank with coil resistance r
RD = L/(C·r) = Q²·r
Decay of the amplitude
e−Rt/(2L)
Method
Find the resonance frequency first: ω₀ = 1/√(LC) and f₀ = ω₀/(2π).
Decide whether the circuit is series or parallel: series Q = (1/R)√(L/C), parallel Q = R√(C/L).
Use BW = f₀/Q for the bandwidth, or the shortcuts R/(2πL) (series) and 1/(2πRC) (parallel).
For energy questions, use that the total energy ½CV₀² stays constant in an ideal LC circuit and swings between C and L every quarter period.
Three-phase power
Y connection
VL = √3·Vph, IL = Iph
Δ connection
VL = Vph, IL = √3·Iph
Total real power
P = √3·VL·IL·cos φ = 3·Iph²·R
Apparent and reactive power
S = √3·VL·IL, Q = P·tan φ
Correction capacitors
QC = P(tan φ1 − tan φ2), C = QC/(3ωV²)
Voltage across each capacitor
Δ: VL Y: VL/√3
Motor input
Pin = Pout/η
RC & RL transients
Time constant
τ = RC | τ = L/R
Response
x(t) = x(∞) + [x(0) − x(∞)]·e−t/τ
Capacitor at DC
open circuit; vC cannot jump
Inductor at DC
short circuit; iL cannot jump
Settled
t ≈ 5τ
Method
Find the initial value just after switching: a capacitor voltage and an inductor current cannot jump.
Find the final value long after switching: a capacitor acts as an open circuit, an inductor as a short circuit.
Find the time constant: τ = RC or τ = L/R, using the resistance seen by the capacitor or inductor.
Use x(t) = x(∞) + [x(0) − x(∞)]·e−t/τ.
Thévenin & Norton
Thévenin voltage
Vth = Vopen circuit
Thévenin resistance
Rth: all sources off, seen from a–b
Norton current
IN = Vth/Rth
Load current
IL = Vth/(Rth + RL)
Maximum power transfer
RL = Rth, Pmax = Vth²/(4Rth)
Method
Remove the load and mark the two terminals a and b.
Find the open-circuit voltage between a and b: this is Vth.
Switch off all independent sources and find the resistance seen from a–b: this is Rth.
Put the load back on the equivalent circuit: Vth in series with Rth.
For the Norton equivalent, convert: IN = Vth/Rth, with RN = Rth in parallel.
2Practice problems
1.Complex numbersMedium
Write z = 6∠−40° in rectangular form a + jb and give the real part a.
r = 6θ = −40°
a =
2.Complex numbersHard
The equation z² − 4z + 5 = 0 has two complex roots. Find their modulus |z|.
p = −4q = 5
|z| =
3.AC impedance & phasorsMedium
A series RLC circuit with C = 22 µF must resonate at 100 Hz. Find the inductance L needed.
f0 = 100 HzC = 22 µF
L = mH
4.AC impedance & phasorsHard
A series RLC circuit is connected to a 24 V (rms), 60 Hz supply. Find the resonant frequency f0 of the circuit.
V = 24 V (rms)f = 60 HzR = 40 ΩL = 100 mHC = 100 µF
f0 = Hz
5.AC power & power factorMedium
A single-phase motor takes 37 kW at a power factor of 0.75 lagging from a 230 V supply. Find the reactive power Q it draws.
P = 37 kWpf = 0.75V = 230 V
Q = kvar
6.AC power & power factorHard
A single-phase load takes 20 kW at a power factor of 0.8 lagging from a 240 V, 50 Hz supply. A capacitor connected in parallel raises the power factor to 0.98. Find the new line current Inew.
P = 20 kWpf1 = 0.8pf2 = 0.98V = 240 Vf = 50 Hz
Inew = A
7.LC resonance, Q factor & bandwidthMedium
A 10 µF capacitor charged to 6 V oscillates with an ideal 2.2 µH inductor. Find the energy WL stored in the inductor at the moment the capacitor voltage is 1.2 V, in µJ.
C = 10 µFV0 = 6 VvC = 1.2 V
WL = µJ
8.LC resonance, Q factor & bandwidthHard
The half-power frequencies of a resonance curve are 10 kHz and 15 kHz. Find the resonance frequency as their geometric mean, and then the quality factor Q.
f1 = 10 kHzf2 = 15 kHz
Q =
9.Three-phase powerMedium
A balanced Δ-connected load with an impedance of 8 + j6 Ω per phase is connected to a balanced three-phase supply with a line-to-line voltage of 400 V. Find the total real power P absorbed by the load in kW.
VL = 400 VZ = 8 + j6 Ω per phase
P = kW
10.Three-phase powerHard
A balanced three-phase load takes 80 kW at a power factor of 0.72 lagging from a 415 V (line-to-line), 50 Hz supply. A three-phase capacitor bank in parallel with the load must raise the overall power factor to 0.92 lagging. The real power stays the same. The capacitors are connected in Δ. Find the capacitance Cph of each capacitor in µF.
P = 80 kWpf1 = 0.72pf2 = 0.92VL = 415 Vf = 50 Hz
Cph = µF
11.RC & RL transientsMedium
The inductor carries no current before the switch closes at t = 0. Find the current i at t = 1 ms.
Vs = 24 VR = 22 ΩL = 10 mHt = 1 ms
i = A
12.RC & RL transientsHard
Just before the switch closes at t = 0, the capacitor holds 3 V with the polarity shown. How long does it take for vC to reach 6.6 V? Find t.
Vs = 9 VR = 1 kΩC = 220 µFvC(0) = 3 V
t = ms
13.Thévenin & NortonMedium
Find the Thévenin resistance Rth seen from terminals a–b.
V1 = 30 VR1 = 5 ΩR2 = 15 ΩR3 = 2 Ω
Rth = Ω
14.Thévenin & NortonHard
Find the Norton current IN: the current that flows from a to b if the terminals are shorted.
V1 = 30 VIs = 4 AR1 = 5 ΩR2 = 10 ΩR3 = 12 Ω
IN = A
15.Bode plots & marginsMedium
The RL low-pass filter shown has R = 220 Ω, L = 47 mH. A sinusoidal input of 2.2 kHz is applied. Find the gain |H| = |vout/vin| in dB.
R = 220 ΩL = 47 mHf = 2.2 kHz
|H| = dB
16.Bode plots & marginsHard
A unity-feedback loop has the open-loop transfer function L(s) = 760/(s(s + 20)). Find the phase margin PM in degrees.
L(s) = 760/(s(s + 20))
PM = °
3Solutions
1.Complex numbers
Answer: a = 4.596
Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.
Components
a = 6·cos(−40°) = 4.596
b = 6·sin(−40°) = −3.857
Rectangular form
z = 4.596 − j3.857
a = 4.596
Answer
a = 4.596
2.Complex numbers
Answer: |z| = 2.236
De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.
Discriminant
p² − 4q = 16 − 20 = −4 < 0
Quadratic formula
z = (4 ± j√4)/2 = 2 + j, 2 − j
Answer
|z| = √(2² + 1²) = √5 = 2.236
Answer
|z| = 2.236
3.AC impedance & phasors
Answer: L = 115.1 mH
AC circuits with phasors: resistors, inductors and capacitors have impedances R, jωL and 1/(jωC), with ω = 2πf. In series, impedances add like resistances, but as complex numbers. Rms current and voltage follow Ohm’s law with |Z|.
Resonance condition
At resonance the inductive and capacitive reactances cancel: ωL = 1/(ωC).
ω₀ = 2π·100 = 628.3 rad/s
L = 1/(ω₀²·C) = 1/(628.3²·22·10⁻⁶) = 115.1 mH
Answer
L = 115.1 mH
4.AC impedance & phasors
Answer: f0 = 50.33 Hz
AC circuits with phasors: resistors, inductors and capacitors have impedances R, jωL and 1/(jωC), with ω = 2πf. In series, impedances add like resistances, but as complex numbers. Rms current and voltage follow Ohm’s law with |Z|.
Resonance
At resonance the inductive and capacitive reactances cancel: ωL = 1/(ωC). The supply frequency does not matter.
AC power: apparent power S = V·I (VA) splits into real power P = S·cos φ (W), which does useful work, and reactive power Q = S·sin φ (var), which moves back and forth between source and load. The power factor is cos φ. A capacitor in parallel supplies reactive power locally, so the line current drops for the same real power.
Angle
φ = arccos(0.75) = 41.41°, tan φ = 0.8819
Reactive power
Q = P·tan φ = 37·0.8819 = 32.63 kvar
Answer
Q = 32.63 kvar
6.AC power & power factor
Answer: Inew = 85.03 A
AC power: apparent power S = V·I (VA) splits into real power P = S·cos φ (W), which does useful work, and reactive power Q = S·sin φ (var), which moves back and forth between source and load. The power factor is cos φ. A capacitor in parallel supplies reactive power locally, so the line current drops for the same real power.
Reactive power before and after
The real power P does not change; only the reactive power drawn from the supply does.
Q1 = P·tan φ1 = 20·tan(36.87°) = 15 kvar
Q2 = P·tan φ2 = 20·tan(11.48°) = 4.061 kvar
QC = Q1 − Q2 = 10.94 kvar
New line current
Inew = P/(V·cos φ2) = 20000/(240·0.98) = 85.03 A
Answer
Inew = 85.03 A
7.LC resonance, Q factor & bandwidth
Answer: WL = 172.8 µJ
LC resonance: a charged capacitor connected to an inductor drives a current that charges it the other way: the energy swings between the electric field of C (½Cv²) and the magnetic field of L (½Li²) at the natural frequency f0 = 1/(2π√(LC)). Without resistance the total energy ½CV0² stays constant, so the peak current is Imax = V0√(C/L). One period is T = 1/f0; the energy moves from C to L in a quarter of it.
Total energy
½·1 × 10⁻⁵·6² = 0.00018 J
Energy left in the capacitor
½·1 × 10⁻⁵·1.2² = 7.2 × 10⁻⁶ J
Energy in the inductor
WL = 0.0001728 J = 172.8 µJ
Answer
WL = 172.8 µJ
8.LC resonance, Q factor & bandwidth
Answer: Q = 2.449
Q factor and bandwidth: in a resonant circuit Q = 2π·(energy stored)/(energy lost per cycle). For series RLC Q = ω0L/R = (1/R)√(L/C); for parallel RLC Q = R/(ω0L) = R√(C/L). The bandwidth between the half-power frequencies f1 and f2 (where the power is half and the current or voltage 1/√2 of its peak) is BW = f2 − f1 = f0/Q, which is R/(2πL) in series and 1/(2πRC) in parallel. The resonance frequency is the geometric mean f0 = √(f1f2), and f1,2 = f0(√(1 + 1/(4Q²)) ∓ 1/(2Q)). Losses also make the oscillation decay: in series RLC the amplitude falls as e−Rt/(2L).
Resonance frequency
f0 = √(10000·15000) = 12247 Hz
Bandwidth
BW = 15000 − 10000 = 5000 Hz
Quality factor
Q = 12247/5000 = 2.449
Answer
Q = 2.449
9.Three-phase power
Answer: P = 38.4 kW
Balanced three-phase systems: in a Y (star) connection the line-to-line voltage is √3 times the phase voltage, VL = √3·Vph, and the line current equals the phase current. In a Δ (delta) connection the line-to-line voltage equals the phase voltage and the line current is √3 times the phase current, IL = √3·Iph. The total power is three times the power of one phase: P = 3·Vph·Iph·cos φ = √3·VL·IL·cos φ.
Phase voltage
Vph = VL = 400 V
Phase current
|Z| = √(8² + 6²) = 10 Ω
Iph = 400/10 = 40 A
Total real power
Only the resistive part of each impedance absorbs real power.
P = 3·Iph²·R = 3·40²·8 = 38.4 kW
Answer
P = 38.4 kW
Check: cos φ = R/|Z| = 0.8, and √3·VL·IL·cos φ gives the same power.
10.Three-phase power
Answer: Cph = 265.1 µF
Balanced three-phase systems: in a Y (star) connection the line-to-line voltage is √3 times the phase voltage, VL = √3·Vph, and the line current equals the phase current. In a Δ (delta) connection the line-to-line voltage equals the phase voltage and the line current is √3 times the phase current, IL = √3·Iph. The total power is three times the power of one phase: P = 3·Vph·Iph·cos φ = √3·VL·IL·cos φ. Power factor correction: capacitors supply reactive power locally, QC = P·(tan φ1 − tan φ2). Each of the three capacitors supplies QC/3 = V²·ω·C, where V is the voltage across that capacitor: VL in a Δ bank, VL/√3 in a Y bank.
Reactive power before and after
The real power is unchanged, so each power factor fixes the reactive power: Q = P·tan φ.
Q1 = 80·tan(acos 0.72) = 80·0.9639 = 77.11 kvar
Q2 = 80·tan(acos 0.92) = 80·0.426 = 34.08 kvar
Reactive power from the capacitors
QC = Q1 − Q2 = 43.03 kvar
Capacitance per phase
In a Δ bank each capacitor is connected between two lines.
First-order transients: in a circuit with one capacitor or one inductor, every voltage and current moves exponentially from its initial value to its final value: x(t) = x(∞) + [x(0) − x(∞)]·e−t/τ, with τ = RC or τ = L/R. After about 5τ the circuit has settled.
Time constant and final current
Long after the switch closes the inductor behaves like a short circuit, so the final current is set by R alone.
First-order transients: in a circuit with one capacitor or one inductor, every voltage and current moves exponentially from its initial value to its final value: x(t) = x(∞) + [x(0) − x(∞)]·e−t/τ, with τ = RC or τ = L/R. After about 5τ the circuit has settled.
Initial value, final value, time constant
The capacitor voltage cannot jump, so it starts at its stored value and heads for the source voltage.
t = τ·ln((3 − 9)/(6.6 − 9)) = 220·ln(2.5) = 201.6 ms
Answer
t = 201.6 ms
13.Thévenin & Norton
Answer: Rth = 5.75 Ω
Thévenin’s theorem: any linear two-terminal network behaves like a single voltage source Vth in series with a resistance Rth. Norton’s theorem gives the same network as a current source IN = Vth/Rth in parallel with Rth.
Find Rth with every source switched off
Replace voltage sources with shorts and current sources with opens, then look into the circuit from a–b.
R1 ∥ R2 = 5·15/(5+15) = 3.75 Ω
Rth = (R1 ∥ R2) + R3 = 3.75 + 2 = 5.75 Ω
14.Thévenin & Norton
Answer: IN = 5.304 A
Thévenin’s theorem: any linear two-terminal network behaves like a single voltage source Vth in series with a resistance Rth. Norton’s theorem gives the same network as a current source IN = Vth/Rth in parallel with Rth.
Find Rth with every source switched off
Replace voltage sources with shorts and current sources with opens, then look into the circuit from a–b.
R1 ∥ R2 = 5·10/(5+10) = 3.333 Ω
Rth = (R1 ∥ R2) + R3 = 3.333 + 12 = 15.33 Ω
Find Vth, the open-circuit voltage
With a–b open, the only path for Iₛ is through R₃ into node A. Find V_A by superposition of V₁ and Iₛ, then add the drop across R₃.
VA = V1·R2/(R1+R2) + Is·(R1∥R2) = 20 + 4·3.333 = 33.33 V
Vth = VB = VA + Is·R3 = 33.33 + 4·12 = 81.33 V
Norton equivalent
A Norton source is the same circuit seen as a current source in parallel with R_th. Its current is the short-circuit current at a–b.
IN = Vth/Rth = 81.33/15.33 = 5.304 A
15.Bode plots & margins
Answer: |H| = −9.877 dB
Frequency response: substitute s = jω in the transfer function. The magnitude in decibels is 20·log₁₀|H(jω)| and the phase is the sum of the angles of the numerator factors minus those of the denominator factors. A first-order RC or RL filter has its corner (−3 dB) frequency at ωc = 1/(RC) or R/L, and fc = ωc/(2π); a low-pass filter gives |H| = 1/√(1 + (ω/ωc)²) and φ = −atan(ω/ωc). In the asymptotic (straight-line) Bode plot each pole bends the magnitude down by 20 dB/decade at its corner frequency, each zero bends it up by 20 dB/decade, and an integrator 1/s gives −20 dB/decade at all frequencies. Gain crossover ωc: |L(jω)| = 1 (0 dB); phase margin PM = 180° + ∠L(jωc). Phase crossover ω180: ∠L(jω) = −180°; gain margin GM = −20·log₁₀|L(jω180)| dB. The closed loop is stable when both margins are positive.
Corner frequency
ωc = R/L = 220/0.047 = 4681 rad/s
fc = 745 Hz → f/fc = 2200/745 = 2.953
Gain
|H| = 1/√(1 + 2.953²) = 0.3207
20·log₁₀(0.3207) = −9.877 dB
Answer
|H| = −9.877 dB
16.Bode plots & margins
Answer: PM = 39.57 °
Frequency response: substitute s = jω in the transfer function. The magnitude in decibels is 20·log₁₀|H(jω)| and the phase is the sum of the angles of the numerator factors minus those of the denominator factors. A first-order RC or RL filter has its corner (−3 dB) frequency at ωc = 1/(RC) or R/L, and fc = ωc/(2π); a low-pass filter gives |H| = 1/√(1 + (ω/ωc)²) and φ = −atan(ω/ωc). In the asymptotic (straight-line) Bode plot each pole bends the magnitude down by 20 dB/decade at its corner frequency, each zero bends it up by 20 dB/decade, and an integrator 1/s gives −20 dB/decade at all frequencies. Gain crossover ωc: |L(jω)| = 1 (0 dB); phase margin PM = 180° + ∠L(jωc). Phase crossover ω180: ∠L(jω) = −180°; gain margin GM = −20·log₁₀|L(jω180)| dB. The closed loop is stable when both margins are positive.