Circuit Analysis 2: AC circuits: cram pack

Formula sheets, the key method steps for every topic and 16 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

AC impedance & phasors

Impedances
ZR = R, ZL = jωL, ZC = 1/(jωC)
Angular frequency
ω = 2πf
Magnitude and angle
|Z| = √(R² + X²), φ = atan(X/R)
Phasor Ohm’s law
V = I·Z

Method

  1. Convert the frequency: ω = 2πf.
  2. Find each reactance: XL = ωL and XC = 1/(ωC).
  3. Add impedances like resistors, with Z = R + jX.
  4. Find the magnitude |Z| = √(R² + X²) and the angle φ = atan(X/R), then use Ohm’s law with phasors.

AC power & power factor

Real power
P = V·I·cos φ
Reactive power
Q = V·I·sin φ
Apparent power
S = V·I = √(P² + Q²)
Power factor
pf = cos φ = P/S
Correction capacitor
QC = P(tan φ1 − tan φ2), C = QC/(ωV²)

LC resonance, Q factor & bandwidth

Natural frequency
ω0 = 1/√(LC), f0 = 1/(2π√(LC))
Energy
W = ½CV0² = ½Cv² + ½Li²
Peak current
Imax = V0√(C/L)
Quality factor
Q = 2π·(energy stored)/(energy lost per cycle)
Series RLC
Q = (1/R)√(L/C), BW = R/(2πL)
Parallel RLC
Q = R√(C/L), BW = 1/(2πRC)
Bandwidth
BW = f2 − f1 = f0/Q, f0 = √(f1f2)
Half-power frequencies
f1,2 = f0(√(1 + 1/(4Q²)) ∓ 1/(2Q))
Tank with coil resistance r
RD = L/(C·r) = Q²·r
Decay of the amplitude
e−Rt/(2L)

Method

  1. Find the resonance frequency first: ω₀ = 1/√(LC) and f₀ = ω₀/(2π).
  2. Decide whether the circuit is series or parallel: series Q = (1/R)√(L/C), parallel Q = R√(C/L).
  3. Use BW = f₀/Q for the bandwidth, or the shortcuts R/(2πL) (series) and 1/(2πRC) (parallel).
  4. For energy questions, use that the total energy ½CV₀² stays constant in an ideal LC circuit and swings between C and L every quarter period.

Three-phase power

Y connection
VL = √3·Vph, IL = Iph
Δ connection
VL = Vph, IL = √3·Iph
Total real power
P = √3·VL·IL·cos φ = 3·Iph²·R
Apparent and reactive power
S = √3·VL·IL, Q = P·tan φ
Correction capacitors
QC = P(tan φ1 − tan φ2), C = QC/(3ωV²)
Voltage across each capacitor
Δ: VL Y: VL/√3
Motor input
Pin = Pout/η

RC & RL transients

Time constant
τ = RC | τ = L/R
Response
x(t) = x(∞) + [x(0) − x(∞)]·e−t/τ
Capacitor at DC
open circuit; vC cannot jump
Inductor at DC
short circuit; iL cannot jump
Settled
t ≈ 5τ

Method

  1. Find the initial value just after switching: a capacitor voltage and an inductor current cannot jump.
  2. Find the final value long after switching: a capacitor acts as an open circuit, an inductor as a short circuit.
  3. Find the time constant: τ = RC or τ = L/R, using the resistance seen by the capacitor or inductor.
  4. Use x(t) = x(∞) + [x(0) − x(∞)]·e−t/τ.

Thévenin & Norton

Thévenin voltage
Vth = Vopen circuit
Thévenin resistance
Rth: all sources off, seen from a–b
Norton current
IN = Vth/Rth
Load current
IL = Vth/(Rth + RL)
Maximum power transfer
RL = Rth, Pmax = Vth²/(4Rth)

Method

  1. Remove the load and mark the two terminals a and b.
  2. Find the open-circuit voltage between a and b: this is Vth.
  3. Switch off all independent sources and find the resistance seen from a–b: this is Rth.
  4. Put the load back on the equivalent circuit: Vth in series with Rth.
  5. For the Norton equivalent, convert: IN = Vth/Rth, with RN = Rth in parallel.

2Practice problems

1.Complex numbersMedium
ReIm22−2−244−4−4z₁z₂w

Given z₁ = 5∠150° and z₂ = 1.5∠−25°, find the imaginary part of w = z₁/z₂.

z₁ = 5∠150°z₂ = 1.5∠−25°
Im(w) =
2.Complex numbersHard
ReIm22−2−244−4−4z₁z₂

The equation z² − 6z + 34 = 0 has two complex roots. Find their modulus |z|.

p = −6q = 34
|z| =
3.AC impedance & phasorsMedium
100 V100 HzR = 15 ΩL = 200 mHC = 47 µF

A series RLC circuit is connected to a 100 V (rms), 100 Hz supply. Find the phase angle φ of the impedance, in degrees (positive when the current lags the voltage).

V = 100 V (rms)f = 100 HzR = 15 ΩL = 200 mHC = 47 µF
φ = °
4.AC impedance & phasorsHard
230 V60 HzR = 100 ΩL = 250 mHC = 4.7 µFI

A series RLC circuit is connected to a 230 V (rms), 60 Hz supply. Find the rms current I.

V = 230 V (rms)f = 60 HzR = 100 ΩL = 250 mHC = 4.7 µF
I = A
5.AC power & power factorMedium
240 V119 kW, 0.625 kW, 0.7I

Two loads are connected in parallel to a 240 V single-phase supply: a 19 kW load at a power factor of 0.6 lagging and a 5 kW load at a power factor of 0.7 lagging. Find the overall power factor cos φ seen by the supply.

V = 240 VP1 = 19 kW, pf1 = 0.6 laggingP2 = 5 kW, pf2 = 0.7 lagging
cos φ =
6.AC power & power factorHard
P = 10 kWQ1​S1​φ1​QC​

A single-phase load takes 10 kW at a power factor of 0.75 lagging from a 240 V, 60 Hz supply. A capacitor connected in parallel raises the power factor to 0.9. Find the reactive power QC the capacitor must supply.

P = 10 kWpf1 = 0.75pf2 = 0.9V = 240 Vf = 60 Hz
QC = kvar
7.LC resonance, Q factor & bandwidthMedium
f|I|0.7071100 kHzf1​ = ?f2​BW

A series RLC circuit resonates at 100 kHz with Q = 3. Find the lower half-power frequency f1 exactly, in kHz.

f0 = 100 kHzQ = 3
f1 = kHz
8.LC resonance, Q factor & bandwidthHard
C = 47 nFr = 10 ΩL = 470 µH

A parallel tank circuit is made of a 47 nF capacitor and a 470 µH coil with a winding resistance of 10 Ω. At resonance it behaves like a resistor, its dynamic resistance RD = L/(C·r). Find RD in kΩ.

L = 470 µHC = 47 nFr = 10 Ω
RD = kΩ
9.Three-phase powerMedium
ABCVL​ = 415 VNZ = 16 + j12 Ωper phase

A balanced Y-connected load with an impedance of 16 + j12 Ω per phase is connected to a balanced three-phase supply with a line-to-line voltage of 415 V. Find the total real power P absorbed by the load in kW.

VL = 415 VZ = 16 + j12 Ω per phase
P = kW
10.Three-phase powerHard
P = 100 kWφ1​S1​Q2​QC​

A balanced three-phase load takes 100 kW at a power factor of 0.8 lagging from a 415 V (line-to-line), 60 Hz supply. A three-phase capacitor bank in parallel with the load must raise the overall power factor to 0.95 lagging. The real power stays the same. The capacitors are connected in Δ. Find the capacitance Cph of each capacitor in µF.

P = 100 kWpf1 = 0.8pf2 = 0.95VL = 415 Vf = 60 Hz
Cph = µF
11.RC & RL transientsMedium
+−Vs​15 Vt = 0R1​ = 10 kΩR2​ = 2.2 kΩC47 µF+−vC​

The source Vₛ charges the capacitor through R₁, and R₂ is connected in parallel with C. The capacitor is uncharged when the switch closes at t = 0. Find the time constant τ of the circuit after the switch closes.

Vs = 15 VR1 = 10 kΩR2 = 2.2 kΩC = 47 µF
τ = ms
12.RC & RL transientsHard
+−Vs​5 Vt = 0R = 3.3 kΩC33 µF+−vC​vC​(0) = 2 V

Just before the switch closes at t = 0, the capacitor holds 2 V with the polarity shown. How long does it take for vC to reach 3.2 V? Find t.

Vs = 5 VR = 3.3 kΩC = 33 µFvC(0) = 2 V
t = ms
13.Thévenin & NortonMedium
R1​ = 6 ΩR3​ = 20 Ω+−V1​18 VR2​5 ΩAab

Find the Thévenin voltage Vth seen from terminals a–b.

V1 = 18 VR1 = 6 ΩR2 = 5 ΩR3 = 20 Ω
Vth = V
14.Thévenin & NortonHard
R1​ = 10 ΩR3​ = 4 Ω+−V1​15 VR2​4 ΩAIs​1 ABRL​5 ΩIL​

A load RL = 5 Ω is connected across a–b. Replace the rest of the circuit with its Thévenin equivalent and find the load current IL.

V1 = 15 VIs = 1 AR1 = 10 ΩR2 = 4 ΩR3 = 4 ΩRL = 5 Ω
IL = A
15.Bode plots & marginsMedium
vin​C = 4.7 nFR = 2.2 kΩvout​

The RC high-pass filter shown has R = 2.2 kΩ, C = 4.7 nF. A sinusoidal input of 7.7 kHz is applied. Find the phase shift φ of vout relative to vin, in degrees.

R = 2.2 kΩC = 4.7 nFf = 7.7 kHz
φ = °
16.Bode plots & marginsHard
|H| (dB)0.10.1111010100100−80−60−40−2002040ω (rad/s)φ (°)ω (rad/s)−180−135−90−450ωc​ = ?

A unity-feedback loop has the open-loop transfer function L(s) = 10/(s(s + 1)). Find the gain crossover frequency ωc, where |L(jω)| = 1.

L(s) = 10/(s(s + 1))
ωc = rad/s

3Solutions

1.Complex numbers

Answer: Im(w) = 0.2905

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Modulus and argument of w

|w| = 5 / 1.5 = 3.333
θ = 150° − (−25)° = 175°

Rectangular form

Re(w) = 3.333·cos(175°) = −3.321
Im(w) = 3.333·sin(175°) = 0.2905
Im(w) = 0.2905

Answer

Im(w) = 0.2905
2.Complex numbers

Answer: |z| = 5.831

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Discriminant

p² − 4q = 36 − 136 = −100 < 0

Quadratic formula

z = (6 ± j√100)/2 = 3 + j5, 3 − j5

Answer

|z| = √(3² + 5²) = √34 = 5.831

Answer

|z| = 5.831
3.AC impedance & phasors

Answer: φ = 80.72 °

AC circuits with phasors: resistors, inductors and capacitors have impedances R, jωL and 1/(jωC), with ω = 2πf. In series, impedances add like resistances, but as complex numbers. Rms current and voltage follow Ohm’s law with |Z|.

Reactances

ω = 2πf = 2π·100 = 628.3 rad/s
XL = ωL = 628.3·0.2 = 125.7 Ω
XC = 1/(ωC) = 1/(628.3·47·10⁻⁶) = 33.86 Ω

Impedance

In series the impedances add as complex numbers: Z = R + j(XL − XC).

|Z| = √(R² + (XL − XC)²) = √(15² + (91.8)²) = 93.02 Ω

Phase angle

φ = arctan((XL − XC)/R) = arctan(91.8/15) = 80.72°

Answer

φ = 80.72°
4.AC impedance & phasors

Answer: I = 0.4785 A

AC circuits with phasors: resistors, inductors and capacitors have impedances R, jωL and 1/(jωC), with ω = 2πf. In series, impedances add like resistances, but as complex numbers. Rms current and voltage follow Ohm’s law with |Z|.

Reactances

ω = 2πf = 2π·60 = 377 rad/s
XL = ωL = 377·0.25 = 94.25 Ω
XC = 1/(ωC) = 1/(377·4.7·10⁻⁶) = 564.4 Ω

Impedance

In series the impedances add as complex numbers: Z = R + j(XL − XC).

|Z| = √(R² + (XL − XC)²) = √(100² + (−470.1)²) = 480.6 Ω

Current

The same current flows through every element of a series circuit.

I = V/|Z| = 230/480.6 = 0.4785 A

Answer

I = 0.4785 A
5.AC power & power factor

Answer: cos φ = 0.6192

AC power: apparent power S = V·I (VA) splits into real power P = S·cos φ (W), which does useful work, and reactive power Q = S·sin φ (var), which moves back and forth between source and load. The power factor is cos φ. A capacitor in parallel supplies reactive power locally, so the line current drops for the same real power.

Reactive power of each load

A lagging load takes reactive power (Q > 0); a leading load supplies it (Q < 0).

Q1 = 19·tan(arccos 0.6) = 25.33 kvar
Q2 = 5·tan(arccos 0.7) = 5.101 kvar

Totals

P = 19 + 5 = 24 kW
Q = 25.33 + 5.101 = 30.43 kvar
S = √(24² + 30.43²) = 38.76 kVA

Overall power factor

cos φ = P/S = 24/38.76 = 0.6192 lagging

Answer

cos φ = 0.6192
6.AC power & power factor

Answer: QC = 3.976 kvar

AC power: apparent power S = V·I (VA) splits into real power P = S·cos φ (W), which does useful work, and reactive power Q = S·sin φ (var), which moves back and forth between source and load. The power factor is cos φ. A capacitor in parallel supplies reactive power locally, so the line current drops for the same real power.

Reactive power before and after

The real power P does not change; only the reactive power drawn from the supply does.

Q1 = P·tan φ1 = 10·tan(41.41°) = 8.819 kvar
Q2 = P·tan φ2 = 10·tan(25.84°) = 4.843 kvar
QC = Q1 − Q2 = 3.976 kvar

Answer

QC = 3.976 kvar
7.LC resonance, Q factor & bandwidth

Answer: f1 = 84.71 kHz

Q factor and bandwidth: in a resonant circuit Q = 2π·(energy stored)/(energy lost per cycle). For series RLC Q = ω0L/R = (1/R)√(L/C); for parallel RLC Q = R/(ω0L) = R√(C/L). The bandwidth between the half-power frequencies f1 and f2 (where the power is half and the current or voltage 1/√2 of its peak) is BW = f2 − f1 = f0/Q, which is R/(2πL) in series and 1/(2πRC) in parallel. The resonance frequency is the geometric mean f0 = √(f1f2), and f1,2 = f0(√(1 + 1/(4Q²)) ∓ 1/(2Q)). Losses also make the oscillation decay: in series RLC the amplitude falls as e−Rt/(2L).

Square-root term

√(1 + 1/(4·3²)) = 1.014

Lower half-power frequency

f1 = 100000·(1.014 − 0.1667) = 84713 Hz = 84.71 kHz

Answer

f1 = 84.71 kHz

The upper one is f₂ = 118 kHz; check: f₂ − f₁ = 33.33 kHz = f₀/Q.

8.LC resonance, Q factor & bandwidth

Answer: RD = 1 kΩ

Q factor and bandwidth: in a resonant circuit Q = 2π·(energy stored)/(energy lost per cycle). For series RLC Q = ω0L/R = (1/R)√(L/C); for parallel RLC Q = R/(ω0L) = R√(C/L). The bandwidth between the half-power frequencies f1 and f2 (where the power is half and the current or voltage 1/√2 of its peak) is BW = f2 − f1 = f0/Q, which is R/(2πL) in series and 1/(2πRC) in parallel. The resonance frequency is the geometric mean f0 = √(f1f2), and f1,2 = f0(√(1 + 1/(4Q²)) ∓ 1/(2Q)). Losses also make the oscillation decay: in series RLC the amplitude falls as e−Rt/(2L).

Dynamic resistance

RD = 0.00047/(4.7 × 10⁻⁸·10) = 1000 Ω = 1 kΩ

Check with Q

Q = (1/r)·√(L/C) = 10, Q²·r = 1000 Ω

Answer

RD = 1 kΩ
9.Three-phase power

Answer: P = 6.889 kW

Balanced three-phase systems: in a Y (star) connection the line-to-line voltage is √3 times the phase voltage, VL = √3·Vph, and the line current equals the phase current. In a Δ (delta) connection the line-to-line voltage equals the phase voltage and the line current is √3 times the phase current, IL = √3·Iph. The total power is three times the power of one phase: P = 3·Vph·Iph·cos φ = √3·VL·IL·cos φ.

Phase voltage

Vph = 415/√3 = 239.6 V

Phase current

|Z| = √(16² + 12²) = 20 Ω
Iph = 239.6/20 = 11.98 A

Total real power

Only the resistive part of each impedance absorbs real power.

P = 3·Iph²·R = 3·11.98²·16 = 6.889 kW

Answer

P = 6.889 kW

Check: cos φ = R/|Z| = 0.8, and √3·VL·IL·cos φ gives the same power.

10.Three-phase power

Answer: Cph = 216.3 µF

Balanced three-phase systems: in a Y (star) connection the line-to-line voltage is √3 times the phase voltage, VL = √3·Vph, and the line current equals the phase current. In a Δ (delta) connection the line-to-line voltage equals the phase voltage and the line current is √3 times the phase current, IL = √3·Iph. The total power is three times the power of one phase: P = 3·Vph·Iph·cos φ = √3·VL·IL·cos φ. Power factor correction: capacitors supply reactive power locally, QC = P·(tan φ1 − tan φ2). Each of the three capacitors supplies QC/3 = V²·ω·C, where V is the voltage across that capacitor: VL in a Δ bank, VL/√3 in a Y bank.

Reactive power before and after

The real power is unchanged, so each power factor fixes the reactive power: Q = P·tan φ.

Q1 = 100·tan(acos 0.8) = 100·0.75 = 75 kvar
Q2 = 100·tan(acos 0.95) = 100·0.3287 = 32.87 kvar

Reactive power from the capacitors

QC = Q1 − Q2 = 42.13 kvar

Capacitance per phase

In a Δ bank each capacitor is connected between two lines.

V = 415 V, ω = 2π·60 = 377 rad/s
Cph = (QC/3)/(ω·V²) = 14044/(377·415²) = 216.3 µF

Answer

Cph = 216.3 µF
11.RC & RL transients

Answer: τ = 84.75 ms

First-order transients: in a circuit with one capacitor or one inductor, every voltage and current moves exponentially from its initial value to its final value: x(t) = x(∞) + [x(0) − x(∞)]·e−t/τ, with τ = RC or τ = L/R. After about 5τ the circuit has settled.

Thévenin equivalent seen by the capacitor

Short the source to find Rth; open the capacitor to find the voltage it will settle at.

Rth = R1 ∥ R2 = 10·2.2/(10 + 2.2) = 1.803 kΩ
vC(∞) = 15·2.2/(10 + 2.2) = 2.705 V

Time constant

τ = Rth·C = 1.803·47 = 84.75 ms

Answer

τ = 84.75 ms
12.RC & RL transients

Answer: t = 55.63 ms

First-order transients: in a circuit with one capacitor or one inductor, every voltage and current moves exponentially from its initial value to its final value: x(t) = x(∞) + [x(0) − x(∞)]·e−t/τ, with τ = RC or τ = L/R. After about 5τ the circuit has settled.

Initial value, final value, time constant

The capacitor voltage cannot jump, so it starts at its stored value and heads for the source voltage.

vC(0) = 2 V, vC(∞) = Vs = 5 V
τ = R·C = 3.3 kΩ · 33 µF = 108.9 ms
vC(t) = 5 + (2 − 5)·e−t/τ

Solve for the time

3.2 = 5 + (−3)·e−t/τ → e−t/τ = (3.2 − 5)/(2 − 5) = 0.6
t = τ·ln((2 − 5)/(3.2 − 5)) = 108.9·ln(1.667) = 55.63 ms

Answer

t = 55.63 ms
13.Thévenin & Norton

Answer: Vth = 8.182 V

Thévenin’s theorem: any linear two-terminal network behaves like a single voltage source Vth in series with a resistance Rth. Norton’s theorem gives the same network as a current source IN = Vth/Rth in parallel with Rth.

R1​ = 6 ΩR3​ = 20 ΩSHORTR2​5 ΩAabRth​

Find Rth with every source switched off

Replace voltage sources with shorts and current sources with opens, then look into the circuit from a–b.

R1 ∥ R2 = 6·5/(6+5) = 2.727 Ω
Rth = (R1 ∥ R2) + R3 = 2.727 + 20 = 22.73 Ω
R1​ = 6 ΩR3​ = 20 Ω+−V1​18 VR2​5 ΩAab+−Vth​

Find Vth, the open-circuit voltage

With a–b open, no current flows through R₃, so there is no drop across it and V_b = V_A. R₁ and R₂ form a voltage divider.

Vth = V1·R2/(R1+R2) = 18·5/(6+5) = 8.182 V
14.Thévenin & Norton

Answer: IL = 0.9398 A

Thévenin’s theorem: any linear two-terminal network behaves like a single voltage source Vth in series with a resistance Rth. Norton’s theorem gives the same network as a current source IN = Vth/Rth in parallel with Rth.

R1​ = 10 ΩR3​ = 4 ΩSHORTR2​4 ΩAOPENBabRth​

Find Rth with every source switched off

Replace voltage sources with shorts and current sources with opens, then look into the circuit from a–b.

R1 ∥ R2 = 10·4/(10+4) = 2.857 Ω
Rth = (R1 ∥ R2) + R3 = 2.857 + 4 = 6.857 Ω
R1​ = 10 ΩR3​ = 4 Ω+−V1​15 VR2​4 ΩAIs​1 ABab+−Vth​

Find Vth, the open-circuit voltage

With a–b open, the only path for Iₛ is through R₃ into node A. Find V_A by superposition of V₁ and Iₛ, then add the drop across R₃.

VA = V1·R2/(R1+R2) + Is·(R1∥R2) = 4.286 + 1·2.857 = 7.143 V
Vth = VB = VA + Is·R3 = 7.143 + 1·4 = 11.14 V
Rth​ = 6.857 Ω+−Vth​11.14 VRL​5 ΩIL​

Connect the load to the Thévenin equivalent

The Thévenin source and R_th in series behave exactly like the original circuit at a–b, so the load sees a simple series loop.

IL = Vth/(Rth + RL) = 11.14/(6.857 + 5) = 0.9398 A
15.Bode plots & margins

Answer: φ = 63.42 °

Frequency response: substitute s = jω in the transfer function. The magnitude in decibels is 20·log₁₀|H(jω)| and the phase is the sum of the angles of the numerator factors minus those of the denominator factors. A first-order RC or RL filter has its corner (−3 dB) frequency at ωc = 1/(RC) or R/L, and fc = ωc/(2π); a low-pass filter gives |H| = 1/√(1 + (ω/ωc)²) and φ = −atan(ω/ωc). In the asymptotic (straight-line) Bode plot each pole bends the magnitude down by 20 dB/decade at its corner frequency, each zero bends it up by 20 dB/decade, and an integrator 1/s gives −20 dB/decade at all frequencies. Gain crossover ωc: |L(jω)| = 1 (0 dB); phase margin PM = 180° + ∠L(jωc). Phase crossover ω180: ∠L(jω) = −180°; gain margin GM = −20·log₁₀|L(jω180)| dB. The closed loop is stable when both margins are positive.

Corner frequency

ωc = 1/(RC) = 1/(2200·4.7 × 10⁻⁹) = 96712 rad/s
fc = 15392 Hz → f/fc = 7700/15392 = 0.5003

Phase

φ = 90° − atan(0.5003) = 63.42°

Answer

φ = 63.42°
16.Bode plots & margins

Answer: ωc = 3.084 rad/s

Frequency response: substitute s = jω in the transfer function. The magnitude in decibels is 20·log₁₀|H(jω)| and the phase is the sum of the angles of the numerator factors minus those of the denominator factors. A first-order RC or RL filter has its corner (−3 dB) frequency at ωc = 1/(RC) or R/L, and fc = ωc/(2π); a low-pass filter gives |H| = 1/√(1 + (ω/ωc)²) and φ = −atan(ω/ωc). In the asymptotic (straight-line) Bode plot each pole bends the magnitude down by 20 dB/decade at its corner frequency, each zero bends it up by 20 dB/decade, and an integrator 1/s gives −20 dB/decade at all frequencies. Gain crossover ωc: |L(jω)| = 1 (0 dB); phase margin PM = 180° + ∠L(jωc). Phase crossover ω180: ∠L(jω) = −180°; gain margin GM = −20·log₁₀|L(jω180)| dB. The closed loop is stable when both margins are positive.

Gain crossover

ω⁴ + 1ω² − 100 = 0
ω² = (−1 + √(1 + 4·100))/2 = 9.512
ωc = 3.084 rad/s

Answer

ωc = 3.084 rad/s

ExamProblems · examproblems.com/courses/circuit-analysis-2