Computer Networks: cram pack

Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

IPv4 subnetting

Hosts per subnet
2(32 − prefix) − 2 (/31: 2, /32: 1)
Block size
256 − (mask octet)
Network address
IP AND mask
Broadcast address
IP OR (NOT mask): all host bits set to 1
Subnets from n borrowed bits
2n

Number systems

Place values
binary 2k, octal 8k, hex 16k
To decimal
Σ dk·bk
From decimal
divide by the base, read the remainders bottom-up
Hex ↔ binary
one hex digit = 4 bits
Two’s complement
invert the bits and add 1

2Practice problems

1.IPv4 subnettingMedium
/?11111111111111111111111100000000network bitshost bits

A department needs 183 host addresses in a single subnet. What is the longest prefix length p (smallest subnet) that is big enough?

183 hosts
p =
2.IPv4 subnettingHard

The network 192.168.2.0/24 is split with VLSM for these LANs: A: 9 hosts, B: 61 hosts, C: 72 hosts, D: 5 hosts. Subnets are allocated from .0 upwards, the LAN with the most hosts first, each with the smallest subnet that fits. What is the fourth octet x of the network address of LAN B?

A: 9B: 61C: 72D: 5
x =
3.Computer networksMedium

Using even parity, which parity bit is added to the data bits 1011001?

  1. A0
  2. B2
  3. C1
  4. D4
4.Computer networksHard

With sliding-window protocols, how does Go-Back-N differ from Selective Repeat after one frame is lost?

  1. ABoth resend the whole window from the start
  2. BGo-Back-N resends only the lost frame; Selective Repeat resends that frame and all later ones
  3. CNeither ever resends lost frames
  4. DGo-Back-N resends the lost frame and all later ones; Selective Repeat only the lost one
5.Number systemsMedium
place values in two's complement1−12816403201608041201

The 8-bit pattern 1100 0010 stores a signed integer in two's complement. What is its value N in decimal?

1100 00108 bit
N =
6.Number systemsHard
click the bits to set them012806403201608040201

Set the bits to the 8-bit result of 0101 1100 XOR 0011 0001. What is the result's value R in decimal?

0101 1100XOR0011 0001
R =

3Solutions

1.IPv4 subnetting

Answer: p = 24

IPv4 subnetting: an address has 32 bits. The prefix /p says how many leading bits identify the network; the remaining 32 − p bits number the hosts. A subnet has 2³²⁻ᵖ addresses, but the first (network address) and last (broadcast address) cannot be given to hosts, so 2³²⁻ᵖ − 2 hosts fit. Exceptions: a /31 (point-to-point link, RFC 3021) uses both of its 2 addresses for hosts, and a /32 is one single address (a single host or a loopback).

Host bits needed

27 − 2 = 126 < 183
28 − 2 = 254 ≥ 183 → h = 8

Prefix length

p = 32 − 8 = 24

Answer

p = /24
2.IPv4 subnetting

Answer: x = 128

VLSM: each LAN gets the smallest subnet with 2ʰ − 2 ≥ its host count, i.e. prefix 32 − h. Allocating the largest subnets first keeps every block aligned on a multiple of its own size, so the network addresses follow by adding up the block sizes.

Block size per LAN

C: 72 hosts → 27 = 128 (/25)
B: 61 hosts → 26 = 64 (/26)
A: 9 hosts → 24 = 16 (/28)
D: 5 hosts → 23 = 8 (/29)

Allocation, largest first

C: .0 – .127
B: .128 – .191
A: .192 – .207
D: .208 – .215

Answer

x = 128

LAN B: 192.168.2.128/26.

3.Computer networks

Answer: A · 0

Why this is the answer

1011001 contains four 1-bits, already an even number, so the parity bit is 0. With odd parity it would be 1.

Answer

A · 0
4.Computer networks

Answer: D · Go-Back-N resends the lost frame and all later ones; Selective Repeat only the lost one

Why this is the answer

A Go-Back-N receiver discards out-of-order frames, so the sender must repeat everything after the loss. Selective Repeat buffers them and asks only for the missing one.

Answer

D · Go-Back-N resends the lost frame and all later ones; Selective Repeat only the lost one
5.Number systems

Answer: N = −62

Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.

Add the place values

The other bits keep their normal positive values.

−128 + 64 + 2 = −62

Answer

N = −62
6.Number systems

Answer: R = 109

Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.

Bit by bit

XOR gives 1 where the two bits differ.

0101 1100
XOR 0011 0001
= 0110 1101

Value of the result

0110 1101₂ = 109

Answer

R = 109

ExamProblems · examproblems.com/courses/computer-networks