IPv4 subnetting
- Hosts per subnet
- 2(32 − prefix) − 2 (/31: 2, /32: 1)
- Block size
- 256 − (mask octet)
- Network address
- IP AND mask
- Broadcast address
- IP OR (NOT mask): all host bits set to 1
- Subnets from n borrowed bits
- 2n
Computer Networks: cram pack
Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
1Formulas and methods
Number systems
- Place values
- binary 2k, octal 8k, hex 16k
- To decimal
- Σ dk·bk
- From decimal
- divide by the base, read the remainders bottom-up
- Hex ↔ binary
- one hex digit = 4 bits
- Two’s complement
- invert the bits and add 1
2Practice problems
1.IPv4 subnettingMedium
The network 192.168.10.0/24 must be divided into at least 30 equal subnets. If you borrow as few bits as possible, how many usable hosts H does each subnet have?
192.168.10.0/2430 subnets
H =
2.IPv4 subnettingHard
A host has the address 10.20.183.237/28. What is the last number (fourth octet) x of its subnet's broadcast address?
10.20.183.237/28
x =
3.Computer networksMedium
How many usable host addresses does a /24 IPv4 network have?
- A255
- B254
- C252
- D256
4.Computer networksHard
With sliding-window protocols, how does Go-Back-N differ from Selective Repeat after one frame is lost?
- AGo-Back-N resends only the lost frame; Selective Repeat resends that frame and all later ones
- BGo-Back-N resends the lost frame and all later ones; Selective Repeat only the lost one
- CBoth resend the whole window from the start
- DNeither ever resends lost frames
5.Number systemsMedium
Set the bits so they store −3 in 8-bit two's complement. Read as an unsigned number, what is the pattern's value U?
N = −38 bit
U =
6.Number systemsHard
Set the bits to the 8-bit result of 1100 1100 AND 0101 1101. What is the result's value R in decimal?
1100 1100AND0101 1101
R =
3Solutions
1.IPv4 subnetting
Answer: H = 6
IPv4 subnetting: an address has 32 bits. The prefix /p says how many leading bits identify the network; the remaining 32 − p bits number the hosts. A subnet has 2³²⁻ᵖ addresses, but the first (network address) and last (broadcast address) cannot be given to hosts, so 2³²⁻ᵖ − 2 hosts fit. Exceptions: a /31 (point-to-point link, RFC 3021) uses both of its 2 addresses for hosts, and a /32 is one single address (a single host or a loopback).
Bits to borrow
25 = 32 ≥ 30 → b = 5, /29
Hosts per subnet
23 − 2 = 6
Answer
H = 6
2.IPv4 subnetting
Answer: x = 239
IPv4 subnetting: an address has 32 bits. The prefix /p says how many leading bits identify the network; the remaining 32 − p bits number the hosts. A subnet has 2³²⁻ᵖ addresses, but the first (network address) and last (broadcast address) cannot be given to hosts, so 2³²⁻ᵖ − 2 hosts fit. Exceptions: a /31 (point-to-point link, RFC 3021) uses both of its 2 addresses for hosts, and a /32 is one single address (a single host or a loopback).
Block size
24 = 16
Subnet of this host
network: ⌊237/16⌋·16 = 224
broadcast: 224 + 16 − 1 = 239
usable hosts: 225 … 238
Answer
x = 239
3.Computer networks
Answer: B · 254
Why this is the answer
A /24 has 8 host bits, so 2⁸ = 256 addresses. The network and broadcast addresses are reserved, leaving 254 for hosts.
Answer
B · 254
4.Computer networks
Answer: B · Go-Back-N resends the lost frame and all later ones; Selective Repeat only the lost one
Why this is the answer
A Go-Back-N receiver discards out-of-order frames, so the sender must repeat everything after the loss. Selective Repeat buffers them and asks only for the missing one.
Answer
B · Go-Back-N resends the lost frame and all later ones; Selective Repeat only the lost one
5.Number systems
Answer: U = 253
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Invert and add one
3 = 0000 0011
inverted: 1111 1100
+1 → 1111 1101
Read it as unsigned
1111 1101₂ = 256 − 3 = 253
Answer
U = 253
6.Number systems
Answer: R = 76
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Bit by bit
AND gives 1 only where both bits are 1.
1100 1100
AND 0101 1101
= 0100 1100
Value of the result
0100 1100₂ = 76
Answer
R = 76
ExamProblems · examproblems.com/courses/computer-networks