Computer Networks: cram pack

Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

IPv4 subnetting

Hosts per subnet
2(32 − prefix) − 2 (/31: 2, /32: 1)
Block size
256 − (mask octet)
Network address
IP AND mask
Broadcast address
IP OR (NOT mask): all host bits set to 1
Subnets from n borrowed bits
2n

Number systems

Place values
binary 2k, octal 8k, hex 16k
To decimal
Σ dk·bk
From decimal
divide by the base, read the remainders bottom-up
Hex ↔ binary
one hex digit = 4 bits
Two’s complement
invert the bits and add 1

2Practice problems

1.IPv4 subnettingMedium
255.255.255.25211111111111111111111111111111100network bitshost bits

A subnet uses the mask 255.255.255.252. How many usable host addresses H does it have?

255.255.255.252
H =
2.IPv4 subnettingHard
last octet = 163112806413201608041211networkhost

A host has the address 10.20.132.163/25. What is the fourth octet x of the last usable host address in its subnet?

10.20.132.163/25
x =
3.Computer networksMedium

Which metric does RIP use to choose routes?

  1. ABusiness policy
  2. BHop count
  3. CMeasured delay
  4. DLink bandwidth
4.Computer networksHard

With sliding-window protocols, how does Go-Back-N differ from Selective Repeat after one frame is lost?

  1. AGo-Back-N resends the lost frame and all later ones; Selective Repeat only the lost one
  2. BBoth resend the whole window from the start
  3. CNeither ever resends lost frames
  4. DGo-Back-N resends only the lost frame; Selective Repeat resends that frame and all later ones
5.Number systemsMedium
8-bit two's complement0−12806403201608040201

Set the bits so they store −41 in 8-bit two's complement. Read as an unsigned number, what is the pattern's value U?

N = −418 bit
U =
6.Number systemsHard
click the bits to set them012806403201608040201

Set the bits to the 8-bit result of 0111 0100 << 2. What is the result's value R in decimal?

0111 0100<< 2
R =

3Solutions

1.IPv4 subnetting

Answer: H = 2

IPv4 subnetting: an address has 32 bits. The prefix /p says how many leading bits identify the network; the remaining 32 − p bits number the hosts. A subnet has 2³²⁻ᵖ addresses, but the first (network address) and last (broadcast address) cannot be given to hosts, so 2³²⁻ᵖ − 2 hosts fit. Exceptions: a /31 (point-to-point link, RFC 3021) uses both of its 2 addresses for hosts, and a /32 is one single address (a single host or a loopback).

Prefix length

255.255.255.252 = /30

Usable hosts

22 − 2 = 2

Answer

H = 2
2.IPv4 subnetting

Answer: x = 254

IPv4 subnetting: an address has 32 bits. The prefix /p says how many leading bits identify the network; the remaining 32 − p bits number the hosts. A subnet has 2³²⁻ᵖ addresses, but the first (network address) and last (broadcast address) cannot be given to hosts, so 2³²⁻ᵖ − 2 hosts fit. Exceptions: a /31 (point-to-point link, RFC 3021) uses both of its 2 addresses for hosts, and a /32 is one single address (a single host or a loopback).

Block size

27 = 128

Subnet of this host

network: ⌊163/128⌋·128 = 128
broadcast: 128 + 128 − 1 = 255
usable hosts: 129 … 254

Answer

x = 254
3.Computer networks

Answer: B · Hop count

Why this is the answer

RIP is a distance-vector protocol that counts hops, with 16 meaning unreachable. This limits it to small networks.

Answer

B · Hop count
4.Computer networks

Answer: A · Go-Back-N resends the lost frame and all later ones; Selective Repeat only the lost one

Why this is the answer

A Go-Back-N receiver discards out-of-order frames, so the sender must repeat everything after the loss. Selective Repeat buffers them and asks only for the missing one.

Answer

A · Go-Back-N resends the lost frame and all later ones; Selective Repeat only the lost one
5.Number systems

Answer: U = 215

Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.

Invert and add one

41 = 0010 1001
inverted: 1101 0110
+1 → 1101 0111

Read it as unsigned

1101 0111₂ = 256 − 41 = 215

Answer

U = 215
6.Number systems

Answer: R = 208

Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.

Bit by bit

Shifting left by 2 moves every bit 2 places to the left; bits that fall off the left end are lost and zeros come in on the right.

0111 0100 << 2
= 1101 0000

Value of the result

1101 0000₂ = 208

Answer

R = 208

ExamProblems · examproblems.com/courses/computer-networks