IPv4 subnetting
- Hosts per subnet
- 2(32 − prefix) − 2 (/31: 2, /32: 1)
- Block size
- 256 − (mask octet)
- Network address
- IP AND mask
- Broadcast address
- IP OR (NOT mask): all host bits set to 1
- Subnets from n borrowed bits
- 2n
Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
A department needs 594 host addresses in a single subnet. What is the longest prefix length p (smallest subnet) that is big enough?
The network 192.168.239.0/24 is split with VLSM for these LANs: A: 12 hosts, B: 3 hosts, C: 27 hosts, D: 29 hosts, E: 52 hosts. Subnets are allocated from .0 upwards, the LAN with the most hosts first, each with the smallest subnet that fits. What is the fourth octet x of the network address of LAN A?
Why does a switch sometimes send a frame out of all ports except the one it came in on?
Why does the side that closes a TCP connection first stay in the TIME_WAIT state for twice the maximum segment lifetime?
Set the bits so they store −53 in 8-bit two's complement. Read as an unsigned number, what is the pattern's value U?
Set the bits to the 8-bit result of 1000 1010 >> 1. What is the result's value R in decimal?
Answer: p = 22
IPv4 subnetting: an address has 32 bits. The prefix /p says how many leading bits identify the network; the remaining 32 − p bits number the hosts. A subnet has 2³²⁻ᵖ addresses, but the first (network address) and last (broadcast address) cannot be given to hosts, so 2³²⁻ᵖ − 2 hosts fit. Exceptions: a /31 (point-to-point link, RFC 3021) uses both of its 2 addresses for hosts, and a /32 is one single address (a single host or a loopback).
Answer: x = 128
VLSM: each LAN gets the smallest subnet with 2ʰ − 2 ≥ its host count, i.e. prefix 32 − h. Allocating the largest subnets first keeps every block aligned on a multiple of its own size, so the network addresses follow by adding up the block sizes.
LAN A: 192.168.239.128/28.
Answer: A · The destination MAC address is not yet in its address table
For an unknown unicast address the switch floods the frame. When the destination replies, the switch learns its port from the source MAC.
Answer: B · So delayed segments die out and the final ACK can be resent if it was lost
TIME_WAIT ensures a lost final ACK can be repeated and old duplicate segments expire before the same address and port pair is reused.
Answer: U = 203
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Answer: R = 69
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Shifting right by 1 moves every bit 1 places to the right; bits that fall off the right end are lost and zeros come in on the left.
ExamProblems · examproblems.com/courses/computer-networks