IPv4 subnetting
- Hosts per subnet
- 2(32 − prefix) − 2 (/31: 2, /32: 1)
- Block size
- 256 − (mask octet)
- Network address
- IP AND mask
- Broadcast address
- IP OR (NOT mask): all host bits set to 1
- Subnets from n borrowed bits
- 2n
Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
The network 192.168.231.0/24 is divided into /29 subnets, numbered 1, 2, 3, … from the lowest address (subnet 1 starts at .0). What is the fourth octet x of the network address of subnet 12?
The network 192.168.183.0/24 is split with VLSM for these LANs: A: 17 hosts, B: 50 hosts, C: 8 hosts, D: 37 hosts. Subnets are allocated from .0 upwards, the LAN with the most hosts first, each with the smallest subnet that fits. What is the fourth octet x of the network address of LAN C?
What is the purpose of the TCP three-way handshake?
A TCP connection has a 64 KB window and a 100 ms round-trip time, and no window scaling. What is its approximate maximum throughput?
The 8-bit pattern 0111 0011 stores a signed integer in two's complement. What is its value N in decimal?
An uncompressed image is 256 × 256 pixels with 16 bits per pixel. How much memory M does it take, in KiB (1 KiB = 1024 bytes)?
Answer: x = 88
IPv4 subnetting: an address has 32 bits. The prefix /p says how many leading bits identify the network; the remaining 32 − p bits number the hosts. A subnet has 2³²⁻ᵖ addresses, but the first (network address) and last (broadcast address) cannot be given to hosts, so 2³²⁻ᵖ − 2 hosts fit. Exceptions: a /31 (point-to-point link, RFC 3021) uses both of its 2 addresses for hosts, and a /32 is one single address (a single host or a loopback).
Answer: x = 160
VLSM: each LAN gets the smallest subnet with 2ʰ − 2 ≥ its host count, i.e. prefix 32 − h. Allocating the largest subnets first keeps every block aligned on a multiple of its own size, so the network addresses follow by adding up the block sizes.
LAN C: 192.168.183.160/28.
Answer: D · To establish a connection and synchronise sequence numbers
The handshake sets up a connection and agrees initial sequence numbers on both sides before data is sent.
Answer: D · About 5 Mbit/s
Throughput ≤ window / RTT = 65,536 × 8 bits / 0.1 s ≈ 5.2 Mbit/s, however fast the link is.
Answer: N = 115
Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.
The other bits keep their normal positive values.
Answer: M = 128 KiB
Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.
ExamProblems · examproblems.com/courses/computer-networks