IPv4 subnetting
- Hosts per subnet
- 2(32 − prefix) − 2 (/31: 2, /32: 1)
- Block size
- 256 − (mask octet)
- Network address
- IP AND mask
- Broadcast address
- IP OR (NOT mask): all host bits set to 1
- Subnets from n borrowed bits
- 2n
Computer Networks: cram pack
Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
1Formulas and methods
Number systems
- Place values
- binary 2k, octal 8k, hex 16k
- To decimal
- Σ dk·bk
- From decimal
- divide by the base, read the remainders bottom-up
- Hex ↔ binary
- one hex digit = 4 bits
- Two’s complement
- invert the bits and add 1
2Practice problems
1.IPv4 subnettingMedium
The network 192.168.10.0/24 must be divided into at least 30 equal subnets. If you borrow as few bits as possible, how many usable hosts H does each subnet have?
192.168.10.0/2430 subnets
H =
2.IPv4 subnettingHard
A host has the address 10.20.170.205/27. What is the last number (fourth octet) x of its subnet's broadcast address?
10.20.170.205/27
x =
3.Computer networksMedium
How does a stateful firewall differ from a simple packet filter?
- AIt tracks connections and allows replies that belong to established sessions
- BIt encrypts every packet it forwards
- CIt only checks the MAC address of each frame
- DIt blocks all incoming traffic without exceptions, including replies to outgoing requests
4.Computer networksHard
An 8-port switch (no VLANs) has one host on each port. How many collision domains and broadcast domains are there?
- A8 collision domains, 1 broadcast domain
- B1 collision domain, 8 broadcast domains
- C1 collision domain, 1 broadcast domain
- D8 collision domains, 8 broadcast domains
5.Number systemsMedium
Set the bits so they store −113 in 8-bit two's complement. Read as an unsigned number, what is the pattern's value U?
N = −1138 bit
U =
6.Number systemsHard
Set the bits to the 8-bit result of 1011 0011 << 1. What is the result's value R in decimal?
1011 0011<< 1
R =
3Solutions
1.IPv4 subnetting
Answer: H = 6
IPv4 subnetting: an address has 32 bits. The prefix /p says how many leading bits identify the network; the remaining 32 − p bits number the hosts. A subnet has 2³²⁻ᵖ addresses, but the first (network address) and last (broadcast address) cannot be given to hosts, so 2³²⁻ᵖ − 2 hosts fit. Exceptions: a /31 (point-to-point link, RFC 3021) uses both of its 2 addresses for hosts, and a /32 is one single address (a single host or a loopback).
Bits to borrow
25 = 32 ≥ 30 → b = 5, /29
Hosts per subnet
23 − 2 = 6
Answer
H = 6
2.IPv4 subnetting
Answer: x = 223
IPv4 subnetting: an address has 32 bits. The prefix /p says how many leading bits identify the network; the remaining 32 − p bits number the hosts. A subnet has 2³²⁻ᵖ addresses, but the first (network address) and last (broadcast address) cannot be given to hosts, so 2³²⁻ᵖ − 2 hosts fit. Exceptions: a /31 (point-to-point link, RFC 3021) uses both of its 2 addresses for hosts, and a /32 is one single address (a single host or a loopback).
Block size
25 = 32
Subnet of this host
network: ⌊205/32⌋·32 = 192
broadcast: 192 + 32 − 1 = 223
usable hosts: 193 … 222
Answer
x = 223
3.Computer networks
Answer: A · It tracks connections and allows replies that belong to established sessions
Why this is the answer
A stateful firewall keeps a table of active connections, so return traffic is allowed automatically. A stateless filter judges each packet in isolation.
Answer
A · It tracks connections and allows replies that belong to established sessions
4.Computer networks
Answer: A · 8 collision domains, 1 broadcast domain
Why this is the answer
Each switch port is its own collision domain, but broadcasts are forwarded to all ports, so the whole switch is one broadcast domain. A hub would give one of each.
Answer
A · 8 collision domains, 1 broadcast domain
5.Number systems
Answer: U = 143
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Invert and add one
113 = 0111 0001
inverted: 1000 1110
+1 → 1000 1111
Read it as unsigned
1000 1111₂ = 256 − 113 = 143
Answer
U = 143
6.Number systems
Answer: R = 102
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Bit by bit
Shifting left by 1 moves every bit 1 places to the left; bits that fall off the left end are lost and zeros come in on the right.
1011 0011 << 1
= 0110 0110
Value of the result
0110 0110₂ = 102
Answer
R = 102
ExamProblems · examproblems.com/courses/computer-networks