Computer Networks: cram pack

Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

IPv4 subnetting

Hosts per subnet
2(32 − prefix) − 2 (/31: 2, /32: 1)
Block size
256 − (mask octet)
Network address
IP AND mask
Broadcast address
IP OR (NOT mask): all host bits set to 1
Subnets from n borrowed bits
2n

Number systems

Place values
binary 2k, octal 8k, hex 16k
To decimal
Σ dk·bk
From decimal
divide by the base, read the remainders bottom-up
Hex ↔ binary
one hex digit = 4 bits
Two’s complement
invert the bits and add 1

2Practice problems

1.IPv4 subnettingMedium
/?11111111111111111111100000000000network bitshost bits

A department needs 1996 host addresses in a single subnet. What is the longest prefix length p (smallest subnet) that is big enough?

1996 hosts
p =
2.IPv4 subnettingHard
last octet = 113012816413211608040211networkhost

A host has the address 10.20.175.113/27. What is the last number (fourth octet) x of its subnet's broadcast address?

10.20.175.113/27
x =
3.Computer networksMedium

At which OSI layer does a switch normally operate?

  1. ANetwork (layer 3)
  2. BPhysical (layer 1)
  3. CTransport (layer 4)
  4. DData link (layer 2)
4.Computer networksHard

With sliding-window protocols, how does Go-Back-N differ from Selective Repeat after one frame is lost?

  1. ANeither ever resends lost frames
  2. BGo-Back-N resends only the lost frame; Selective Repeat resends that frame and all later ones
  3. CGo-Back-N resends the lost frame and all later ones; Selective Repeat only the lost one
  4. DBoth resend the whole window from the start
5.Number systemsMedium
8-bit two's complement0−12806403201608040201

Set the bits so they store −36 in 8-bit two's complement. Read as an unsigned number, what is the pattern's value U?

N = −368 bit
U =
6.Number systemsHard
click the bits to set them012806403201608040201

Set the bits to the 8-bit result of 1101 1101 << 3. What is the result's value R in decimal?

1101 1101<< 3
R =

3Solutions

1.IPv4 subnetting

Answer: p = 21

IPv4 subnetting: an address has 32 bits. The prefix /p says how many leading bits identify the network; the remaining 32 − p bits number the hosts. A subnet has 2³²⁻ᵖ addresses, but the first (network address) and last (broadcast address) cannot be given to hosts, so 2³²⁻ᵖ − 2 hosts fit. Exceptions: a /31 (point-to-point link, RFC 3021) uses both of its 2 addresses for hosts, and a /32 is one single address (a single host or a loopback).

Host bits needed

210 − 2 = 1022 < 1996
211 − 2 = 2046 ≥ 1996 → h = 11

Prefix length

p = 32 − 11 = 21

Answer

p = /21
2.IPv4 subnetting

Answer: x = 127

IPv4 subnetting: an address has 32 bits. The prefix /p says how many leading bits identify the network; the remaining 32 − p bits number the hosts. A subnet has 2³²⁻ᵖ addresses, but the first (network address) and last (broadcast address) cannot be given to hosts, so 2³²⁻ᵖ − 2 hosts fit. Exceptions: a /31 (point-to-point link, RFC 3021) uses both of its 2 addresses for hosts, and a /32 is one single address (a single host or a loopback).

Block size

25 = 32

Subnet of this host

network: ⌊113/32⌋·32 = 96
broadcast: 96 + 32 − 1 = 127
usable hosts: 97 … 126

Answer

x = 127
3.Computer networks

Answer: D · Data link (layer 2)

Why this is the answer

A standard switch learns MAC addresses and forwards frames at layer 2. Layer 3 switches also route.

Answer

D · Data link (layer 2)
4.Computer networks

Answer: C · Go-Back-N resends the lost frame and all later ones; Selective Repeat only the lost one

Why this is the answer

A Go-Back-N receiver discards out-of-order frames, so the sender must repeat everything after the loss. Selective Repeat buffers them and asks only for the missing one.

Answer

C · Go-Back-N resends the lost frame and all later ones; Selective Repeat only the lost one
5.Number systems

Answer: U = 220

Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.

Invert and add one

36 = 0010 0100
inverted: 1101 1011
+1 → 1101 1100

Read it as unsigned

1101 1100₂ = 256 − 36 = 220

Answer

U = 220
6.Number systems

Answer: R = 232

Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.

Bit by bit

Shifting left by 3 moves every bit 3 places to the left; bits that fall off the left end are lost and zeros come in on the right.

1101 1101 << 3
= 1110 1000

Value of the result

1110 1000₂ = 232

Answer

R = 232

ExamProblems · examproblems.com/courses/computer-networks