Digital Electronics: cram pack

Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Number systems

Place values
binary 2k, octal 8k, hex 16k
To decimal
Σ dk·bk
From decimal
divide by the base, read the remainders bottom-up
Hex ↔ binary
one hex digit = 4 bits
Two’s complement
invert the bits and add 1

Digital logic: gates, K-maps & flip-flops

Basic gates
A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
Boolean rules
X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
De Morgan
(X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
Karnaugh map order
00, 01, 11, 10 (Gray code)
Group of 2ᵏ cells
loses k variables
4-to-1 multiplexer
F = A′B′I0 + A′BI1 + AB′I2 + ABI3
Flip-flops
D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
Counters
n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
Ripple counter
fmax = 1/(n·tpd)
Ring and Johnson counters
n and 2n states

Method

  1. For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
  2. For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
  3. Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
  4. For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.

Data acquisition & sampling

Nyquist criterion
fs > 2·fmax, fN = fs/2
Alias frequency
fa = |f − k·fs|, k = round(f/fs)
Step size
1 LSB = VFSR/2ᴺ
Quantisation error (rounding)
±½ LSB
Truncating ADC code
D = ⌊Vin/LSB⌋
Bits for a resolution r
2ᴺ ≥ span/r
Ideal SQNR, full-scale sine
SQNR = 6.02·N + 1.76 dB
Data rate
channels × fs × N bit/s
Multiplexed ADC
fs = 1/(n·(tc + tset))
UART
Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
Baud rate divider
baud = fclk/(16·D)

Method

  1. Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
  2. For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
  3. For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
  4. For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.

2Practice problems

1.Number systemsMedium
place values in two's complement1−12816413211608141201

The 8-bit pattern 1111 0110 stores a signed integer in two's complement. What is its value N in decimal?

1111 01108 bit
N =
2.Number systemsHard
32 bit1 px512 px512 pxM = ? KiB

An uncompressed image is 512 × 512 pixels with 32 bits per pixel. How much memory M does it take, in KiB (1 KiB = 1024 bytes)?

512 × 512 px32 bit/px1 KiB = 1024 B
M = KiB
3.Digital logic: gates, K-maps & flip-flopsMedium
ABC000111100101324576

Simplify F = BC′ + A′C + ABC′ + AB′C to its minimal sum-of-products form. How many literals L does the simplified expression contain?

F = BC′ + A′C + ABC′ + AB′C
L =
4.Digital logic: gates, K-maps & flip-flopsHard
FFQ0​Q0​FFQ1​Q1​FFQ2​Q2​FFQ3​Q3​FFQ4​Q4​CLKMOD-25

A mod-25 counter has to count through 25 different states. What is the minimum number of flip-flops n it needs?

N = 25
n =
5.Data acquisition & samplingMedium
128⋮8 ch∿01N = 142 kHz? MB

A recorder samples 8 channels at 2 kHz each with a 14-bit ADC. Each sample is stored in whole bytes. Find the memory M needed for a 1 min recording, in MB (1 MB = 10⁶ bytes).

n = 8fs = 2 kHzN = 14t = 1 min
M = MB
6.Data acquisition & samplingHard
122 ch∿01tc​ = 2.5 µstset​ = 2.5 µsfs​ = ?

A 2-channel multiplexer feeds one ADC. Each conversion takes 2.5 µs, and after every channel switch the input needs 2.5 µs to settle. The channels are scanned in turn without pause. Find the sampling rate fs of each channel, in kHz.

n = 2tc = 2.5 µstset = 2.5 µs
fs = kHz

3Solutions

1.Number systems

Answer: N = −10

Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.

Add the place values

The other bits keep their normal positive values.

−128 + 64 + 32 + 16 + 4 + 2 = −10

Answer

N = −10
2.Number systems

Answer: M = 1024 KiB

Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.

Bits and bytes

512·512·32 = 8388608 bit = 1048576 B

Convert to KiB

1048576/1024 = 1024 KiB

Answer

M = 1024 KiB
3.Digital logic: gates, K-maps & flip-flops

Answer: L = 6

Boolean algebra: the rules that simplify expressions are X + X′ = 1 and X·X′ = 0, X + X = X, absorption X + X·Y = X, the combining rule X·Y + X·Y′ = X, X + X′Y = X + Y and the consensus theorem XY + X′Z + YZ = XY + X′Z. De Morgan's laws turn (X·Y)′ into X′ + Y′ and (X + Y)′ into X′·Y′. A Karnaugh map applies these rules graphically: every group of two neighbouring cells is one use of XY + XY′ = X.

Minterms of the expression

BC′ → m(2, 6)
A′C → m(1, 3)
ABC′ → m(6)
AB′C → m(5)
ABC00011110010011131204150716

Group and read off

F = B′C + BC′ + A′C

Count the literals

L = 6

Answer

L = 6

Another grouping of the same size exists; it has the same number of literals.

4.Digital logic: gates, K-maps & flip-flops

Answer: n = 5

Flip-flops and counters: a flip-flop changes only at the active clock edge. D copies its input (Q⁺ = D); T toggles when T = 1; JK holds for 00, resets for 01, sets for 10 and toggles for 11. An n-bit binary counter has 2ⁿ states and counts modulo 2ⁿ; a mod-N counter goes 0, 1, …, N − 1 and back to 0, and needs the smallest n with 2ⁿ ≥ N flip-flops. Each stage of a ripple counter halves the frequency, so the last output of a mod-N counter runs at fclk/N. A Johnson counter of n flip-flops has 2n states, a ring counter n.

Number of flip-flops

2ⁿ ≥ 25 → n = 5 (2⁵ = 32)

Answer

n = 5
5.Data acquisition & sampling

Answer: M = 1.92 MB

Data rates: every channel delivers fs samples per second of N bits, so the raw rate is channels × fs × N bit/s. In memory a sample takes whole bytes (a 12-bit sample is stored in 2 bytes), so the memory for a recording is channels × fs × bytes per sample × time. A multiplexed ADC converts the channels one after another: each conversion (with settling) takes t, so one round of n channels takes n·t and each channel is sampled at 1/(n·t).

Bytes per sample

⌈14/8⌉ = 2 B

Byte rate

8·2000·2 = 32000 B/s

Memory

M = 32000·60 = 1.92 × 10⁶ B = 1.92 MB

Answer

M = 1.92 MB
6.Data acquisition & sampling

Answer: fs = 100 kHz

Data rates: every channel delivers fs samples per second of N bits, so the raw rate is channels × fs × N bit/s. In memory a sample takes whole bytes (a 12-bit sample is stored in 2 bytes), so the memory for a recording is channels × fs × bytes per sample × time. A multiplexed ADC converts the channels one after another: each conversion (with settling) takes t, so one round of n channels takes n·t and each channel is sampled at 1/(n·t).

Time per channel

2.5 + 2.5 = 5 µs

Time per scan

2·5 = 10 µs

Sampling rate per channel

fs = 1/10 µs = 100 kHz

Answer

fs = 100 kHz

ExamProblems · examproblems.com/courses/digital-electronics