Number systems
- Place values
- binary 2k, octal 8k, hex 16k
- To decimal
- Σ dk·bk
- From decimal
- divide by the base, read the remainders bottom-up
- Hex ↔ binary
- one hex digit = 4 bits
- Two’s complement
- invert the bits and add 1
Digital Electronics: cram pack
Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
1Formulas and methods
Digital logic: gates, K-maps & flip-flops
- Basic gates
- A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
- Boolean rules
- X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
- De Morgan
- (X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
- Karnaugh map order
- 00, 01, 11, 10 (Gray code)
- Group of 2ᵏ cells
- loses k variables
- 4-to-1 multiplexer
- F = A′B′I0 + A′BI1 + AB′I2 + ABI3
- Flip-flops
- D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
- Counters
- n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
- Ripple counter
- fmax = 1/(n·tpd)
- Ring and Johnson counters
- n and 2n states
Method
- For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
- For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
- Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
- For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.
Data acquisition & sampling
- Nyquist criterion
- fs > 2·fmax, fN = fs/2
- Alias frequency
- fa = |f − k·fs|, k = round(f/fs)
- Step size
- 1 LSB = VFSR/2ᴺ
- Quantisation error (rounding)
- ±½ LSB
- Truncating ADC code
- D = ⌊Vin/LSB⌋
- Bits for a resolution r
- 2ᴺ ≥ span/r
- Ideal SQNR, full-scale sine
- SQNR = 6.02·N + 1.76 dB
- Data rate
- channels × fs × N bit/s
- Multiplexed ADC
- fs = 1/(n·(tc + tset))
- UART
- Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
- Baud rate divider
- baud = fclk/(16·D)
Method
- Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
- For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
- For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
- For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.
2Practice problems
1.Number systemsMedium
Write −15 as an 8-bit two's complement pattern. Read the pattern as an unsigned binary number: what is its value U in decimal?
N = −158 bit
U =
2.Number systemsHard
Set the bits to the 8-bit result of 0001 1001 XOR 0011 0100. What is the result's value R in decimal?
0001 1001XOR0011 0100
R =
3.Digital logic: gates, K-maps & flip-flopsMedium
Simplify F = B′C + A′BC′ + A′B′C to its minimal sum-of-products form. How many literals L does the simplified expression contain?
F = B′C + A′BC′ + A′B′C
L =
4.Digital logic: gates, K-maps & flip-flopsHard
A 5-bit ripple (asynchronous) counter is built from flip-flops with a propagation delay of 25 ns each. All outputs must have settled before the next clock edge. Find the maximum clock frequency fmax.
n = 5tpd = 25 ns
fmax = MHz
5.Data acquisition & samplingMedium
Find the ideal signal-to-quantisation-noise ratio SQNR of a 20-bit ADC for a full-scale sine wave.
N = 20
SQNR = dB
6.Data acquisition & samplingHard
A microcontroller with a 16 MHz clock sets its UART baud rate as fclk/(16·D), with D a whole number rounded to the nearest value. The target is 4800 baud. Find the percentage error of the real baud rate (positive when it is too fast).
fclk = 16 MHztarget = 4800 Bd
e = %
3Solutions
1.Number systems
Answer: U = 241
Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.
Invert and add one
15 = 0000 1111
inverted: 1111 0000
+1 → 1111 0001
Read it as unsigned
1111 0001₂ = 256 − 15 = 241
Answer
U = 241
2.Number systems
Answer: R = 45
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Bit by bit
XOR gives 1 where the two bits differ.
0001 1001
XOR 0011 0100
= 0010 1101
Value of the result
0010 1101₂ = 45
Answer
R = 45
3.Digital logic: gates, K-maps & flip-flops
Answer: L = 5
Boolean algebra: the rules that simplify expressions are X + X′ = 1 and X·X′ = 0, X + X = X, absorption X + X·Y = X, the combining rule X·Y + X·Y′ = X, X + X′Y = X + Y and the consensus theorem XY + X′Z + YZ = XY + X′Z. De Morgan's laws turn (X·Y)′ into X′ + Y′ and (X + Y)′ into X′·Y′. A Karnaugh map applies these rules graphically: every group of two neighbouring cells is one use of XY + XY′ = X.
Minterms of the expression
B′C → m(1, 5)
A′BC′ → m(2)
A′B′C → m(1)
Group and read off
F = B′C + A′BC′
Count the literals
L = 5
Answer
L = 5
4.Digital logic: gates, K-maps & flip-flops
Answer: fmax = 8 MHz
Flip-flops and counters: a flip-flop changes only at the active clock edge. D copies its input (Q⁺ = D); T toggles when T = 1; JK holds for 00, resets for 01, sets for 10 and toggles for 11. An n-bit binary counter has 2ⁿ states and counts modulo 2ⁿ; a mod-N counter goes 0, 1, …, N − 1 and back to 0, and needs the smallest n with 2ⁿ ≥ N flip-flops. Each stage of a ripple counter halves the frequency, so the last output of a mod-N counter runs at fclk/N. A Johnson counter of n flip-flops has 2n states, a ring counter n.
Worst-case settling time
T = 5·25 ns = 125 ns
Maximum frequency
fmax = 1/125 ns = 8 MHz
Answer
fmax = 8 MHz
5.Data acquisition & sampling
Answer: SQNR = 122.2 dB
ADC resolution: an N-bit converter divides its full-scale range VFSR into 2ᴺ codes, from 0 to 2ᴺ − 1. One step is 1 LSB = VFSR/2ᴺ: the smallest change the converter can show. A truncating ADC gives the code ⌊Vin/LSB⌋; a rounding ADC is never more than ½ LSB away from the true value, its quantisation error. Every extra bit halves the LSB and adds about 6 dB to the ideal signal-to-quantisation-noise ratio SQNR = 6.02·N + 1.76 dB for a full-scale sine. To reach a resolution r over a span, choose the smallest N with 2ᴺ ≥ span/r.
Ideal SQNR
SQNR = 6.02·20 + 1.76 = 122.2 dB
Answer
SQNR = 122.2 dB
6.Data acquisition & sampling
Answer: e = 0.1603 %
UART: an asynchronous serial link sends each byte as a frame: one start bit (low), the data bits, an optional parity bit and one or two stop bits (high). The baud rate is the number of bits per second, so one bit lasts Tb = 1/baud and a frame of n bits lasts n/baud. The common 8N1 format has 10 bits per byte. The baud generator divides the clock: baud = fclk/(16·D) with a whole number D, so the real baud rate differs slightly from the target; an error below about 2 % is usually acceptable.
Divider
D = 16·10⁶/(16·4800) = 208.3 → 208
Real baud rate
16·10⁶/(16·208) = 4808 Bd
Error
(4808 − 4800)/4800·100 = 0.1603 %
Answer
e = 0.1603 %
An error below about 2 % is usually acceptable.
ExamProblems · examproblems.com/courses/digital-electronics