Number systems
- Place values
- binary 2k, octal 8k, hex 16k
- To decimal
- Σ dk·bk
- From decimal
- divide by the base, read the remainders bottom-up
- Hex ↔ binary
- one hex digit = 4 bits
- Two’s complement
- invert the bits and add 1
Digital Electronics: cram pack
Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
1Formulas and methods
Digital logic: gates, K-maps & flip-flops
- Basic gates
- A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
- Boolean rules
- X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
- De Morgan
- (X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
- Karnaugh map order
- 00, 01, 11, 10 (Gray code)
- Group of 2ᵏ cells
- loses k variables
- 4-to-1 multiplexer
- F = A′B′I0 + A′BI1 + AB′I2 + ABI3
- Flip-flops
- D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
- Counters
- n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
- Ripple counter
- fmax = 1/(n·tpd)
- Ring and Johnson counters
- n and 2n states
Method
- For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
- For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
- Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
- For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.
Data acquisition & sampling
- Nyquist criterion
- fs > 2·fmax, fN = fs/2
- Alias frequency
- fa = |f − k·fs|, k = round(f/fs)
- Step size
- 1 LSB = VFSR/2ᴺ
- Quantisation error (rounding)
- ±½ LSB
- Truncating ADC code
- D = ⌊Vin/LSB⌋
- Bits for a resolution r
- 2ᴺ ≥ span/r
- Ideal SQNR, full-scale sine
- SQNR = 6.02·N + 1.76 dB
- Data rate
- channels × fs × N bit/s
- Multiplexed ADC
- fs = 1/(n·(tc + tset))
- UART
- Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
- Baud rate divider
- baud = fclk/(16·D)
Method
- Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
- For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
- For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
- For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.
2Practice problems
1.Number systemsMedium
Write −97 as an 8-bit two's complement pattern. Read the pattern as an unsigned binary number: what is its value U in decimal?
N = −978 bit
U =
2.Number systemsHard
What is the most negative integer N that can be stored in 24-bit two's complement?
24 bit
N =
3.Digital logic: gates, K-maps & flip-flopsMedium
Simplify F = A′B′C + BC + A′B′ + A′C to its minimal sum-of-products form. How many literals L does the simplified expression contain?
F = A′B′C + BC + A′B′ + A′C
L =
4.Digital logic: gates, K-maps & flip-flopsHard
A mod-6 counter is built from the minimum number of flip-flops. How many of the possible states U are never used?
N = 6
U =
5.Data acquisition & samplingMedium
A 12-bit ADC with an input range of 0 to 2.5 V truncates: its output code is ⌊Vin/LSB⌋ with 1 LSB = VFSR/2ᴺ. Find the decimal output code D for an input of 0.454 V.
N = 12VFSR = 2.5 VVin = 0.454 V
D =
6.Data acquisition & samplingHard
A temperature sensor gives 5 mV/°C (0 V at 0 °C). Its signal is amplified 20 times and fed to a 10-bit ADC with a range of 0 to 5 V (1 LSB = VFSR/2ᴺ). Find the temperature change ΔTLSB that corresponds to one LSB.
S = 5 mV/°CG = 20N = 10VFSR = 5 V
ΔTLSB = °C
3Solutions
1.Number systems
Answer: U = 159
Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.
Invert and add one
97 = 0110 0001
inverted: 1001 1110
+1 → 1001 1111
Read it as unsigned
1001 1111₂ = 256 − 97 = 159
Answer
U = 159
2.Number systems
Answer: N = −8.389 × 10⁶
Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.
Most negative value
−223 = −8388608
Answer
N = −8388608
3.Digital logic: gates, K-maps & flip-flops
Answer: L = 4
Boolean algebra: the rules that simplify expressions are X + X′ = 1 and X·X′ = 0, X + X = X, absorption X + X·Y = X, the combining rule X·Y + X·Y′ = X, X + X′Y = X + Y and the consensus theorem XY + X′Z + YZ = XY + X′Z. De Morgan's laws turn (X·Y)′ into X′ + Y′ and (X + Y)′ into X′·Y′. A Karnaugh map applies these rules graphically: every group of two neighbouring cells is one use of XY + XY′ = X.
Minterms of the expression
A′B′C → m(1)
BC → m(3, 7)
A′B′ → m(0, 1)
A′C → m(1, 3)
Group and read off
F = BC + A′B′
Count the literals
L = 4
Answer
L = 4
4.Digital logic: gates, K-maps & flip-flops
Answer: U = 2
Flip-flops and counters: a flip-flop changes only at the active clock edge. D copies its input (Q⁺ = D); T toggles when T = 1; JK holds for 00, resets for 01, sets for 10 and toggles for 11. An n-bit binary counter has 2ⁿ states and counts modulo 2ⁿ; a mod-N counter goes 0, 1, …, N − 1 and back to 0, and needs the smallest n with 2ⁿ ≥ N flip-flops. Each stage of a ripple counter halves the frequency, so the last output of a mod-N counter runs at fclk/N. A Johnson counter of n flip-flops has 2n states, a ring counter n.
Number of flip-flops
2ⁿ ≥ 6 → n = 3 (2³ = 8)
Unused states
U = 8 − 6 = 2
Answer
U = 2
5.Data acquisition & sampling
Answer: D = 743
ADC resolution: an N-bit converter divides its full-scale range VFSR into 2ᴺ codes, from 0 to 2ᴺ − 1. One step is 1 LSB = VFSR/2ᴺ: the smallest change the converter can show. A truncating ADC gives the code ⌊Vin/LSB⌋; a rounding ADC is never more than ½ LSB away from the true value, its quantisation error. Every extra bit halves the LSB and adds about 6 dB to the ideal signal-to-quantisation-noise ratio SQNR = 6.02·N + 1.76 dB for a full-scale sine. To reach a resolution r over a span, choose the smallest N with 2ᴺ ≥ span/r.
Step size
1 LSB = 2.5/212 = 0.6104 mV
Code
Vin/LSB = 454/0.6104 = 743.8
code = ⌊743.8⌋ = 743
Answer
D = 743
In binary that is 001011100111.
6.Data acquisition & sampling
Answer: ΔTLSB = 0.04883 °C
ADC resolution: an N-bit converter divides its full-scale range VFSR into 2ᴺ codes, from 0 to 2ᴺ − 1. One step is 1 LSB = VFSR/2ᴺ: the smallest change the converter can show. A truncating ADC gives the code ⌊Vin/LSB⌋; a rounding ADC is never more than ½ LSB away from the true value, its quantisation error. Every extra bit halves the LSB and adds about 6 dB to the ideal signal-to-quantisation-noise ratio SQNR = 6.02·N + 1.76 dB for a full-scale sine. To reach a resolution r over a span, choose the smallest N with 2ᴺ ≥ span/r.
Step size
1 LSB = 5000/1024 = 4.883 mV
Sensitivity at the ADC
5·20 = 100 mV/°C
Temperature resolution
ΔTLSB = 4.883/100 = 0.04883 °C
Answer
ΔTLSB = 0.04883 °C
The ADC reaches full scale at 50 °C.
ExamProblems · examproblems.com/courses/digital-electronics