Number systems
- Place values
- binary 2k, octal 8k, hex 16k
- To decimal
- Σ dk·bk
- From decimal
- divide by the base, read the remainders bottom-up
- Hex ↔ binary
- one hex digit = 4 bits
- Two’s complement
- invert the bits and add 1
Digital Electronics: cram pack
Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
1Formulas and methods
Digital logic: gates, K-maps & flip-flops
- Basic gates
- A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
- Boolean rules
- X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
- De Morgan
- (X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
- Karnaugh map order
- 00, 01, 11, 10 (Gray code)
- Group of 2ᵏ cells
- loses k variables
- 4-to-1 multiplexer
- F = A′B′I0 + A′BI1 + AB′I2 + ABI3
- Flip-flops
- D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
- Counters
- n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
- Ripple counter
- fmax = 1/(n·tpd)
- Ring and Johnson counters
- n and 2n states
Method
- For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
- For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
- Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
- For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.
Data acquisition & sampling
- Nyquist criterion
- fs > 2·fmax, fN = fs/2
- Alias frequency
- fa = |f − k·fs|, k = round(f/fs)
- Step size
- 1 LSB = VFSR/2ᴺ
- Quantisation error (rounding)
- ±½ LSB
- Truncating ADC code
- D = ⌊Vin/LSB⌋
- Bits for a resolution r
- 2ᴺ ≥ span/r
- Ideal SQNR, full-scale sine
- SQNR = 6.02·N + 1.76 dB
- Data rate
- channels × fs × N bit/s
- Multiplexed ADC
- fs = 1/(n·(tc + tset))
- UART
- Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
- Baud rate divider
- baud = fclk/(16·D)
Method
- Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
- For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
- For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
- For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.
2Practice problems
1.Number systemsMedium
The 8-bit pattern 0110 1010 stores a signed integer in two's complement. What is its value N in decimal?
0110 10108 bit
N =
2.Number systemsHard
Set the bits to the 8-bit result of 0101 1101 << 1. What is the result's value R in decimal?
0101 1101<< 1
R =
3.Digital logic: gates, K-maps & flip-flopsMedium
In this Karnaugh map exactly one 1 has no neighbouring 1, so it stays a group of one cell (a full minterm of four literals) in the minimal SOP form. Neighbours across the map edges count. Click that cell.
F = Σm(3, 4, 5, 12, 14)
- 1AB = 00, CD = 00
- 2AB = 00, CD = 01
- 3AB = 00, CD = 11
- 4AB = 00, CD = 10
- 5AB = 01, CD = 00
- 6AB = 01, CD = 01
- 7AB = 01, CD = 11
- 8AB = 01, CD = 10
- 9AB = 11, CD = 00
- 10AB = 11, CD = 01
- 11AB = 11, CD = 11
- 12AB = 11, CD = 10
- 13AB = 10, CD = 00
- 14AB = 10, CD = 01
- 15AB = 10, CD = 11
- 16AB = 10, CD = 10
4.Digital logic: gates, K-maps & flip-flopsHard
A 4-bit shift register Q₃Q₂Q₁Q₀ holds 1110. At every clock edge the bits shift one place to the right (Q₃ → Q₂ → Q₁ → Q₀, Q₀ is lost) and the serial input enters Q₃. The serial input is 0, 0, 0, 1, 1, 0 at the 6 edges. Give the final state Q = Q₃Q₂Q₁Q₀ as a decimal number.
Q₃Q₂Q₁Q₀ = 11100, 0, 0, 1, 1, 0
Q =
5.Data acquisition & samplingMedium
Find the ideal signal-to-quantisation-noise ratio SQNR of a 16-bit ADC for a full-scale sine wave.
N = 16
SQNR = dB
6.Data acquisition & samplingHard
A 2.4 kHz square wave is sampled at 10 kHz with no anti-aliasing filter. A square wave contains the odd harmonics 3f₁, 5f₁, 7f₁, … At which frequency fa does its harmonic 5f₁ appear in the sampled data? Give it in kHz.
f₁ = 2.4 kHzfs = 10 kHzharmonic: 5f₁
fa = kHz
3Solutions
1.Number systems
Answer: N = 106
Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.
Add the place values
The other bits keep their normal positive values.
64 + 32 + 8 + 2 = 106
Answer
N = 106
2.Number systems
Answer: R = 186
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Bit by bit
Shifting left by 1 moves every bit 1 places to the left; bits that fall off the left end are lost and zeros come in on the right.
0101 1101 << 1
= 1011 1010
Value of the result
1011 1010₂ = 186
Answer
R = 186
3.Digital logic: gates, K-maps & flip-flops
Answer: AB = 00, CD = 11
Karnaugh maps: the cells are ordered in Gray code (00, 01, 11, 10), so neighbouring cells, including the ones across the edges, differ in exactly one variable. Group the 1s in rectangles of 1, 2, 4, 8 or 16 cells, as large as possible and as few as possible, until every 1 is covered. Each group is one product term: the variables that stay constant inside it. A group of 2ᵏ cells loses k variables. Don't-cares (X) may be used to make groups bigger but never have to be covered. Grouping the 0s instead gives the minimal POS form.
Neighbours of each 1
A 1 with a neighbouring 1 can join a group of two or more.
m3: m2, m1, m7, m11 → 0
The isolated 1
m3 = A′B′CD → AB = 00, CD = 11
Answer
AB = 00, CD = 11
4.Digital logic: gates, K-maps & flip-flops
Answer: Q = 6
Flip-flops and counters: a flip-flop changes only at the active clock edge. D copies its input (Q⁺ = D); T toggles when T = 1; JK holds for 00, resets for 01, sets for 10 and toggles for 11. An n-bit binary counter has 2ⁿ states and counts modulo 2ⁿ; a mod-N counter goes 0, 1, …, N − 1 and back to 0, and needs the smallest n with 2ⁿ ≥ N flip-flops. Each stage of a ripple counter halves the frequency, so the last output of a mod-N counter runs at fclk/N. A Johnson counter of n flip-flops has 2n states, a ring counter n.
State after every edge
1110 → 0111 → 0011 → 0001 → 1000 → 1100 → 0110
Decimal value
0110₂ = 6
Answer
Q = 6
5.Data acquisition & sampling
Answer: SQNR = 98.08 dB
ADC resolution: an N-bit converter divides its full-scale range VFSR into 2ᴺ codes, from 0 to 2ᴺ − 1. One step is 1 LSB = VFSR/2ᴺ: the smallest change the converter can show. A truncating ADC gives the code ⌊Vin/LSB⌋; a rounding ADC is never more than ½ LSB away from the true value, its quantisation error. Every extra bit halves the LSB and adds about 6 dB to the ideal signal-to-quantisation-noise ratio SQNR = 6.02·N + 1.76 dB for a full-scale sine. To reach a resolution r over a span, choose the smallest N with 2ᴺ ≥ span/r.
Ideal SQNR
SQNR = 6.02·16 + 1.76 = 98.08 dB
Answer
SQNR = 98.08 dB
6.Data acquisition & sampling
Answer: fa = 2 kHz
Sampling: an ADC measures the signal fs times per second. By the Nyquist–Shannon theorem a frequency f is captured correctly only while f < fs/2, the Nyquist (folding) frequency, so the sampling rate must exceed twice the highest signal frequency. A higher frequency is not lost: it shows up as an alias at fa = |f − k·fs|, with the whole number k that brings the result between 0 and fs/2. The samples cannot tell the two apart, so an analogue anti-aliasing filter must remove everything above fs/2 before the ADC.
Harmonic frequency
5f₁ = 5·2.4 kHz = 12 kHz
Nearest multiple of the sampling rate
m = round(1.2) = 1
Alias frequency
fa = |12 − 1·10| = 2 kHz
Answer
fa = 2 kHz
The alias lands inside the signal band, where no digital filter can remove it. Only an analogue filter before the ADC helps.
ExamProblems · examproblems.com/courses/digital-electronics