Number systems
- Place values
- binary 2k, octal 8k, hex 16k
- To decimal
- Σ dk·bk
- From decimal
- divide by the base, read the remainders bottom-up
- Hex ↔ binary
- one hex digit = 4 bits
- Two’s complement
- invert the bits and add 1
Digital Electronics: cram pack
Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
1Formulas and methods
Digital logic: gates, K-maps & flip-flops
- Basic gates
- A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
- Boolean rules
- X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
- De Morgan
- (X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
- Karnaugh map order
- 00, 01, 11, 10 (Gray code)
- Group of 2ᵏ cells
- loses k variables
- 4-to-1 multiplexer
- F = A′B′I0 + A′BI1 + AB′I2 + ABI3
- Flip-flops
- D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
- Counters
- n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
- Ripple counter
- fmax = 1/(n·tpd)
- Ring and Johnson counters
- n and 2n states
Method
- For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
- For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
- Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
- For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.
Data acquisition & sampling
- Nyquist criterion
- fs > 2·fmax, fN = fs/2
- Alias frequency
- fa = |f − k·fs|, k = round(f/fs)
- Step size
- 1 LSB = VFSR/2ᴺ
- Quantisation error (rounding)
- ±½ LSB
- Truncating ADC code
- D = ⌊Vin/LSB⌋
- Bits for a resolution r
- 2ᴺ ≥ span/r
- Ideal SQNR, full-scale sine
- SQNR = 6.02·N + 1.76 dB
- Data rate
- channels × fs × N bit/s
- Multiplexed ADC
- fs = 1/(n·(tc + tset))
- UART
- Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
- Baud rate divider
- baud = fclk/(16·D)
Method
- Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
- For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
- For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
- For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.
2Practice problems
1.Number systemsMedium
Set the bits so they store −24 in 8-bit two's complement. Read as an unsigned number, what is the pattern's value U?
N = −248 bit
U =
2.Number systemsHard
What is the largest unsigned integer N that fits in 16 bits?
16 bit
N =
3.Digital logic: gates, K-maps & flip-flopsMedium
Simplify F = AB′C′ + AB′ + BC to its minimal sum-of-products form. How many literals L does the simplified expression contain?
F = AB′C′ + AB′ + BC
L =
4.Digital logic: gates, K-maps & flip-flopsHard
Find the minimal SOP form of F(A, B, C, D) = Σm(1, 4, 6, 8, 11, 15) + d(7, 10), where d marks the don't-care conditions. How many product terms N does it have?
F(A, B, C, D) = Σm(1, 4, 6, 8, 11, 15) + d(7, 10)
N =
5.Data acquisition & samplingMedium
An 8-bit ADC with an input range of 0 to 10 V truncates: its output code is ⌊Vin/LSB⌋ with 1 LSB = VFSR/2ᴺ. Find the decimal output code D for an input of 2.118 V.
N = 8VFSR = 10 VVin = 2.118 V
D =
6.Data acquisition & samplingHard
A temperature sensor gives 5 mV/°C (0 V at 0 °C). Its signal is amplified 4 times and fed to a 12-bit ADC with a range of 0 to 3.3 V (1 LSB = VFSR/2ᴺ). Find the temperature change ΔTLSB that corresponds to one LSB.
S = 5 mV/°CG = 4N = 12VFSR = 3.3 V
ΔTLSB = °C
3Solutions
1.Number systems
Answer: U = 232
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Invert and add one
24 = 0001 1000
inverted: 1110 0111
+1 → 1110 1000
Read it as unsigned
1110 1000₂ = 256 − 24 = 232
Answer
U = 232
2.Number systems
Answer: N = 65535
Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.
Largest value
216 − 1 = 65535
Answer
N = 65535
3.Digital logic: gates, K-maps & flip-flops
Answer: L = 4
Boolean algebra: the rules that simplify expressions are X + X′ = 1 and X·X′ = 0, X + X = X, absorption X + X·Y = X, the combining rule X·Y + X·Y′ = X, X + X′Y = X + Y and the consensus theorem XY + X′Z + YZ = XY + X′Z. De Morgan's laws turn (X·Y)′ into X′ + Y′ and (X + Y)′ into X′·Y′. A Karnaugh map applies these rules graphically: every group of two neighbouring cells is one use of XY + XY′ = X.
Minterms of the expression
AB′C′ → m(4)
AB′ → m(4, 5)
BC → m(3, 7)
Group and read off
F = BC + AB′
Count the literals
L = 4
Answer
L = 4
4.Digital logic: gates, K-maps & flip-flops
Answer: N = 4
Karnaugh maps: the cells are ordered in Gray code (00, 01, 11, 10), so neighbouring cells, including the ones across the edges, differ in exactly one variable. Group the 1s in rectangles of 1, 2, 4, 8 or 16 cells, as large as possible and as few as possible, until every 1 is covered. Each group is one product term: the variables that stay constant inside it. A group of 2ᵏ cells loses k variables. Don't-cares (X) may be used to make groups bigger but never have to be covered. Grouping the 0s instead gives the minimal POS form.
Prime implicants
The largest groups that can be formed from 1s and Xs.
BCD, ACD, A′BD′, AB′D′, A′BC, AB′C, A′B′C′D
Minimal cover
F = ACD + A′BD′ + AB′D′ + A′B′C′D
N = 4
Answer
N = 4
5.Data acquisition & sampling
Answer: D = 54
ADC resolution: an N-bit converter divides its full-scale range VFSR into 2ᴺ codes, from 0 to 2ᴺ − 1. One step is 1 LSB = VFSR/2ᴺ: the smallest change the converter can show. A truncating ADC gives the code ⌊Vin/LSB⌋; a rounding ADC is never more than ½ LSB away from the true value, its quantisation error. Every extra bit halves the LSB and adds about 6 dB to the ideal signal-to-quantisation-noise ratio SQNR = 6.02·N + 1.76 dB for a full-scale sine. To reach a resolution r over a span, choose the smallest N with 2ᴺ ≥ span/r.
Step size
1 LSB = 10/28 = 39.06 mV
Code
Vin/LSB = 2118/39.06 = 54.22
code = ⌊54.22⌋ = 54
Answer
D = 54
In binary that is 00110110.
6.Data acquisition & sampling
Answer: ΔTLSB = 0.04028 °C
ADC resolution: an N-bit converter divides its full-scale range VFSR into 2ᴺ codes, from 0 to 2ᴺ − 1. One step is 1 LSB = VFSR/2ᴺ: the smallest change the converter can show. A truncating ADC gives the code ⌊Vin/LSB⌋; a rounding ADC is never more than ½ LSB away from the true value, its quantisation error. Every extra bit halves the LSB and adds about 6 dB to the ideal signal-to-quantisation-noise ratio SQNR = 6.02·N + 1.76 dB for a full-scale sine. To reach a resolution r over a span, choose the smallest N with 2ᴺ ≥ span/r.
Step size
1 LSB = 3300/4096 = 0.8057 mV
Sensitivity at the ADC
5·4 = 20 mV/°C
Temperature resolution
ΔTLSB = 0.8057/20 = 0.04028 °C
Answer
ΔTLSB = 0.04028 °C
The ADC reaches full scale at 165 °C.
ExamProblems · examproblems.com/courses/digital-electronics