Digital Electronics: cram pack

Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Number systems

Place values
binary 2k, octal 8k, hex 16k
To decimal
Σ dk·bk
From decimal
divide by the base, read the remainders bottom-up
Hex ↔ binary
one hex digit = 4 bits
Two’s complement
invert the bits and add 1

Digital logic: gates, K-maps & flip-flops

Basic gates
A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
Boolean rules
X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
De Morgan
(X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
Karnaugh map order
00, 01, 11, 10 (Gray code)
Group of 2ᵏ cells
loses k variables
4-to-1 multiplexer
F = A′B′I0 + A′BI1 + AB′I2 + ABI3
Flip-flops
D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
Counters
n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
Ripple counter
fmax = 1/(n·tpd)
Ring and Johnson counters
n and 2n states

Method

  1. For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
  2. For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
  3. Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
  4. For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.

Data acquisition & sampling

Nyquist criterion
fs > 2·fmax, fN = fs/2
Alias frequency
fa = |f − k·fs|, k = round(f/fs)
Step size
1 LSB = VFSR/2ᴺ
Quantisation error (rounding)
±½ LSB
Truncating ADC code
D = ⌊Vin/LSB⌋
Bits for a resolution r
2ᴺ ≥ span/r
Ideal SQNR, full-scale sine
SQNR = 6.02·N + 1.76 dB
Data rate
channels × fs × N bit/s
Multiplexed ADC
fs = 1/(n·(tc + tset))
UART
Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
Baud rate divider
baud = fclk/(16·D)

Method

  1. Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
  2. For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
  3. For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
  4. For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.

2Practice problems

1.Number systemsMedium
8-bit two's complement0−12806403201608040201

Set the bits so they store −106 in 8-bit two's complement. Read as an unsigned number, what is the pattern's value U?

N = −1068 bit
U =
2.Number systemsHard
click the bits to set them012806403201608040201

Set the bits to the 8-bit result of 0110 0010 XOR 0111 0110. What is the result's value R in decimal?

0110 0010XOR0111 0110
R =
3.Digital logic: gates, K-maps & flip-flopsMedium
ABC000111100101324576

Simplify F = AB′ + A′B′C′ + AB′C′ + B′C′ to its minimal sum-of-products form. How many literals L does the simplified expression contain?

F = AB′ + A′B′C′ + AB′C′ + B′C′
L =
4.Digital logic: gates, K-maps & flip-flopsHard
ABCD00011110000111100001030214X5X716X12013115014X819111010

Find the minimal SOP form of F(A, B, C, D) = Σm(4, 6, 9, 11, 15) + d(5, 7, 8, 12), where d marks the don't-care conditions. How many literals L does it contain?

F(A, B, C, D) = Σm(4, 6, 9, 11, 15) + d(5, 7, 8, 12)
L =
5.Data acquisition & samplingMedium
Vin​N = 18VFSR​2ᴺ − 101 LSB

Find the ideal signal-to-quantisation-noise ratio SQNR of an 18-bit ADC for a full-scale sine wave.

N = 18
SQNR = dB
6.Data acquisition & samplingHard
T10 mV/°C×4∿01N = 8, 3.3 V? °C/LSB

A temperature sensor gives 10 mV/°C (0 V at 0 °C). Its signal is amplified 4 times and fed to an 8-bit ADC with a range of 0 to 3.3 V (1 LSB = VFSR/2ᴺ). Find the temperature change ΔTLSB that corresponds to one LSB.

S = 10 mV/°CG = 4N = 8VFSR = 3.3 V
ΔTLSB = °C

3Solutions

1.Number systems

Answer: U = 150

Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.

Invert and add one

106 = 0110 1010
inverted: 1001 0101
+1 → 1001 0110

Read it as unsigned

1001 0110₂ = 256 − 106 = 150

Answer

U = 150
2.Number systems

Answer: R = 20

Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.

Bit by bit

XOR gives 1 where the two bits differ.

0110 0010
XOR 0111 0110
= 0001 0100

Value of the result

0001 0100₂ = 20

Answer

R = 20
3.Digital logic: gates, K-maps & flip-flops

Answer: L = 4

Boolean algebra: the rules that simplify expressions are X + X′ = 1 and X·X′ = 0, X + X = X, absorption X + X·Y = X, the combining rule X·Y + X·Y′ = X, X + X′Y = X + Y and the consensus theorem XY + X′Z + YZ = XY + X′Z. De Morgan's laws turn (X·Y)′ into X′ + Y′ and (X + Y)′ into X′·Y′. A Karnaugh map applies these rules graphically: every group of two neighbouring cells is one use of XY + XY′ = X.

Minterms of the expression

AB′ → m(4, 5)
A′B′C′ → m(0)
AB′C′ → m(4)
B′C′ → m(0, 4)
ABC00011110011001030214150706

Group and read off

F = B′C′ + AB′

Count the literals

L = 4

Answer

L = 4
4.Digital logic: gates, K-maps & flip-flops

Answer: L = 8

Karnaugh maps: the cells are ordered in Gray code (00, 01, 11, 10), so neighbouring cells, including the ones across the edges, differ in exactly one variable. Group the 1s in rectangles of 1, 2, 4, 8 or 16 cells, as large as possible and as few as possible, until every 1 is covered. Each group is one product term: the variables that stay constant inside it. A group of 2ᵏ cells loses k variables. Don't-cares (X) may be used to make groups bigger but never have to be covered. Grouping the 0s instead gives the minimal POS form.

Prime implicants

The largest groups that can be formed from 1s and Xs.

BC′D′, BCD, ACD, A′B, AB′D, AB′C′
ABCD00011110000111100001030214X5X716X12013115014X819111010

Minimal cover

F = BCD + A′B + AB′D
L = 8

Answer

L = 8

Another grouping of the same size exists; it has the same number of terms and literals.

5.Data acquisition & sampling

Answer: SQNR = 110.1 dB

ADC resolution: an N-bit converter divides its full-scale range VFSR into 2ᴺ codes, from 0 to 2ᴺ − 1. One step is 1 LSB = VFSR/2ᴺ: the smallest change the converter can show. A truncating ADC gives the code ⌊Vin/LSB⌋; a rounding ADC is never more than ½ LSB away from the true value, its quantisation error. Every extra bit halves the LSB and adds about 6 dB to the ideal signal-to-quantisation-noise ratio SQNR = 6.02·N + 1.76 dB for a full-scale sine. To reach a resolution r over a span, choose the smallest N with 2ᴺ ≥ span/r.

Ideal SQNR

SQNR = 6.02·18 + 1.76 = 110.1 dB

Answer

SQNR = 110.1 dB
6.Data acquisition & sampling

Answer: ΔTLSB = 0.3223 °C

ADC resolution: an N-bit converter divides its full-scale range VFSR into 2ᴺ codes, from 0 to 2ᴺ − 1. One step is 1 LSB = VFSR/2ᴺ: the smallest change the converter can show. A truncating ADC gives the code ⌊Vin/LSB⌋; a rounding ADC is never more than ½ LSB away from the true value, its quantisation error. Every extra bit halves the LSB and adds about 6 dB to the ideal signal-to-quantisation-noise ratio SQNR = 6.02·N + 1.76 dB for a full-scale sine. To reach a resolution r over a span, choose the smallest N with 2ᴺ ≥ span/r.

Step size

1 LSB = 3300/256 = 12.89 mV

Sensitivity at the ADC

10·4 = 40 mV/°C

Temperature resolution

ΔTLSB = 12.89/40 = 0.3223 °C

Answer

ΔTLSB = 0.3223 °C

The ADC reaches full scale at 82.5 °C.

ExamProblems · examproblems.com/courses/digital-electronics