Digital Electronics: cram pack

Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Number systems

Place values
binary 2k, octal 8k, hex 16k
To decimal
Σ dk·bk
From decimal
divide by the base, read the remainders bottom-up
Hex ↔ binary
one hex digit = 4 bits
Two’s complement
invert the bits and add 1

Digital logic: gates, K-maps & flip-flops

Basic gates
A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
Boolean rules
X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
De Morgan
(X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
Karnaugh map order
00, 01, 11, 10 (Gray code)
Group of 2ᵏ cells
loses k variables
4-to-1 multiplexer
F = A′B′I0 + A′BI1 + AB′I2 + ABI3
Flip-flops
D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
Counters
n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
Ripple counter
fmax = 1/(n·tpd)
Ring and Johnson counters
n and 2n states

Method

  1. For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
  2. For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
  3. Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
  4. For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.

Data acquisition & sampling

Nyquist criterion
fs > 2·fmax, fN = fs/2
Alias frequency
fa = |f − k·fs|, k = round(f/fs)
Step size
1 LSB = VFSR/2ᴺ
Quantisation error (rounding)
±½ LSB
Truncating ADC code
D = ⌊Vin/LSB⌋
Bits for a resolution r
2ᴺ ≥ span/r
Ideal SQNR, full-scale sine
SQNR = 6.02·N + 1.76 dB
Data rate
channels × fs × N bit/s
Multiplexed ADC
fs = 1/(n·(tc + tset))
UART
Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
Baud rate divider
baud = fclk/(16·D)

Method

  1. Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
  2. For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
  3. For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
  4. For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.

2Practice problems

1.Number systemsMedium
8-bit two's complement0−12806403201608040201

Set the bits so they store −21 in 8-bit two's complement. Read as an unsigned number, what is the pattern's value U?

N = −218 bit
U =
2.Number systemsHard
click the bits to set them012806403201608040201

Set the bits to the 8-bit result of 0100 0011 << 2. What is the result's value R in decimal?

0100 0011<< 2
R =
3.Digital logic: gates, K-maps & flip-flopsMedium
MUXC′I0​0I1​1I2​CI3​ABS1​S0​F

A 4-to-1 multiplexer has its select inputs S₁ = A and S₀ = B, and its data inputs tied to I₀ = C′, I₁ = 0, I₂ = 1, I₃ = C. For how many of the 8 combinations of A, B and C is the output F = 1? Find N.

I₀ = C′I₁ = 0I₂ = 1I₃ = C
N =
4.Digital logic: gates, K-maps & flip-flopsHard
CLKD1234567

A positive-edge-triggered D flip-flop starts with Q = 0 and receives the inputs shown. Click the first clock edge at which Q goes from 1 back to 0.

Q₀ = 0D
  1. 1clock edge 1
  2. 2clock edge 2
  3. 3clock edge 3
  4. 4clock edge 4
  5. 5clock edge 5
  6. 6clock edge 6
  7. 7clock edge 7
5.Data acquisition & samplingMedium
124⋮4 ch∿01N = 1420 kHz? MB

A recorder samples 4 channels at 20 kHz each with a 14-bit ADC. Each sample is stored in whole bytes. Find the memory M needed for a 10 min recording, in MB (1 MB = 10⁶ bytes).

n = 4fs = 20 kHzN = 14t = 10 min
M = MB
6.Data acquisition & samplingHard
SD0​D1​D2​D3​D4​D5​D6​D7​Tb​10·Tb​115200 Bd, 8N1

A 10-bit ADC streams every sample over a UART at 115200 baud, format 8N1 (start bit, 8 data bits, 1 stop bit). Each sample is sent as 2 whole byte(s) and the link is busy all the time. Find the highest signal frequency fmax that can be sampled without aliasing, in Hz.

baud = 115200 BdN = 108N1
fmax = Hz

3Solutions

1.Number systems

Answer: U = 235

Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.

Invert and add one

21 = 0001 0101
inverted: 1110 1010
+1 → 1110 1011

Read it as unsigned

1110 1011₂ = 256 − 21 = 235

Answer

U = 235
2.Number systems

Answer: R = 12

Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.

Bit by bit

Shifting left by 2 moves every bit 2 places to the left; bits that fall off the left end are lost and zeros come in on the right.

0100 0011 << 2
= 0000 1100

Value of the result

0000 1100₂ = 12

Answer

R = 12
3.Digital logic: gates, K-maps & flip-flops

Answer: N = 4

Multiplexer: a 2ⁿ-to-1 multiplexer passes one of its data inputs to the output; the select lines, read as a binary number, pick which one. For a 4-to-1 MUX with selects S₁S₀ = AB, F = A′B′·I₀ + A′B·I₁ + AB′·I₂ + AB·I₃. Tying the data inputs to 0, 1, C or C′ makes the MUX produce any function of A, B and C, which is a common way to build logic with one chip.

Output expression

F = A′B′C′ + AB′ + ABC

Rows with F = 1

ABC = 000, 100, 101, 111
N = 4

Answer

N = 4
4.Digital logic: gates, K-maps & flip-flops

Answer: clock edge 6

Flip-flops and counters: a flip-flop changes only at the active clock edge. D copies its input (Q⁺ = D); T toggles when T = 1; JK holds for 00, resets for 01, sets for 10 and toggles for 11. An n-bit binary counter has 2ⁿ states and counts modulo 2ⁿ; a mod-N counter goes 0, 1, …, N − 1 and back to 0, and needs the smallest n with 2ⁿ ≥ N flip-flops. Each stage of a ripple counter halves the frequency, so the last output of a mod-N counter runs at fclk/N. A Johnson counter of n flip-flops has 2n states, a ring counter n.

Q after every edge

A D flip-flop copies D at each rising edge: Q⁺ = D.

1: D = 0 → Q = 0
2: D = 0 → Q = 0
3: D = 1 → Q = 1
4: D = 1 → Q = 1
5: D = 1 → Q = 1
6: D = 0 → Q = 0
7: D = 0 → Q = 0

First change from 1 to 0

clock edge 6

Answer

clock edge 6
5.Data acquisition & sampling

Answer: M = 96 MB

Data rates: every channel delivers fs samples per second of N bits, so the raw rate is channels × fs × N bit/s. In memory a sample takes whole bytes (a 12-bit sample is stored in 2 bytes), so the memory for a recording is channels × fs × bytes per sample × time. A multiplexed ADC converts the channels one after another: each conversion (with settling) takes t, so one round of n channels takes n·t and each channel is sampled at 1/(n·t).

Bytes per sample

⌈14/8⌉ = 2 B

Byte rate

4·20000·2 = 160000 B/s

Memory

M = 160000·600 = 9.6 × 10⁷ B = 96 MB

Answer

M = 96 MB
6.Data acquisition & sampling

Answer: fmax = 2880 Hz

UART: an asynchronous serial link sends each byte as a frame: one start bit (low), the data bits, an optional parity bit and one or two stop bits (high). The baud rate is the number of bits per second, so one bit lasts Tb = 1/baud and a frame of n bits lasts n/baud. The common 8N1 format has 10 bits per byte. The baud generator divides the clock: baud = fclk/(16·D) with a whole number D, so the real baud rate differs slightly from the target; an error below about 2 % is usually acceptable.

Bits per sample on the line

2·10 = 20 bit

Highest sampling rate

fs,max = 115200/20 = 5760 Hz

Nyquist limit

fmax = 5760/2 = 2880 Hz

Answer

fmax = 2880 Hz

ExamProblems · examproblems.com/courses/digital-electronics