Digital Electronics: cram pack

Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Number systems

Place values
binary 2k, octal 8k, hex 16k
To decimal
Σ dk·bk
From decimal
divide by the base, read the remainders bottom-up
Hex ↔ binary
one hex digit = 4 bits
Two’s complement
invert the bits and add 1

Digital logic: gates, K-maps & flip-flops

Basic gates
A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
Boolean rules
X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
De Morgan
(X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
Karnaugh map order
00, 01, 11, 10 (Gray code)
Group of 2ᵏ cells
loses k variables
4-to-1 multiplexer
F = A′B′I0 + A′BI1 + AB′I2 + ABI3
Flip-flops
D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
Counters
n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
Ripple counter
fmax = 1/(n·tpd)
Ring and Johnson counters
n and 2n states

Method

  1. For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
  2. For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
  3. Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
  4. For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.

Data acquisition & sampling

Nyquist criterion
fs > 2·fmax, fN = fs/2
Alias frequency
fa = |f − k·fs|, k = round(f/fs)
Step size
1 LSB = VFSR/2ᴺ
Quantisation error (rounding)
±½ LSB
Truncating ADC code
D = ⌊Vin/LSB⌋
Bits for a resolution r
2ᴺ ≥ span/r
Ideal SQNR, full-scale sine
SQNR = 6.02·N + 1.76 dB
Data rate
channels × fs × N bit/s
Multiplexed ADC
fs = 1/(n·(tc + tset))
UART
Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
Baud rate divider
baud = fclk/(16·D)

Method

  1. Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
  2. For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
  3. For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
  4. For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.

2Practice problems

1.Number systemsMedium
8-bit two's complement0−12806403201608040201

Set the bits so they store −9 in 8-bit two's complement. Read as an unsigned number, what is the pattern's value U?

N = −98 bit
U =
2.Number systemsHard
click the bits to set them012806403201608040201

Set the bits to the 8-bit result of 0011 0011 AND 1011 0101. What is the result's value R in decimal?

0011 0011AND1011 0101
R =
3.Digital logic: gates, K-maps & flip-flopsMedium
ABCD0001111000011110111111

In this Karnaugh map exactly one 1 has no neighbouring 1, so it stays a group of one cell (a full minterm of four literals) in the minimal SOP form. Neighbours across the map edges count. Click that cell.

F = Σm(0, 3, 4, 6, 13, 15)
  1. 1AB = 00, CD = 00
  2. 2AB = 00, CD = 01
  3. 3AB = 00, CD = 11
  4. 4AB = 00, CD = 10
  5. 5AB = 01, CD = 00
  6. 6AB = 01, CD = 01
  7. 7AB = 01, CD = 11
  8. 8AB = 01, CD = 10
  9. 9AB = 11, CD = 00
  10. 10AB = 11, CD = 01
  11. 11AB = 11, CD = 11
  12. 12AB = 11, CD = 10
  13. 13AB = 10, CD = 00
  14. 14AB = 10, CD = 01
  15. 15AB = 10, CD = 11
  16. 16AB = 10, CD = 10
4.Digital logic: gates, K-maps & flip-flopsHard
FFQ0​Q0​FFQ1​Q1​FFQ2​Q2​FFQ3​Q3​CLKMOD-16

A 1 kHz clock drives a mod-16 counter. Find the frequency fout of its most significant output, which completes one cycle per counting cycle.

fclk = 1 kHzN = 16
fout = kHz
5.Data acquisition & samplingMedium
SD0​D1​D2​D3​D4​D5​D6​D7​Tb​10·Tb​2400 Bd, 8N1

A UART sends bytes at 2400 baud in the format 8N1: 8 data bits, no parity and 1 stop bit(s), plus the start bit. Find the largest number of data bytes per second it can transfer.

baud = 2400 Bd8N1
RB = B/s
6.Data acquisition & samplingHard
f0fs​/2fs​240 Hz3f₁?

A 240 Hz square wave is sampled at 1 kHz with no anti-aliasing filter. A square wave contains the odd harmonics 3f₁, 5f₁, 7f₁, … At which frequency fa does its harmonic 3f₁ appear in the sampled data? Give it in Hz.

f₁ = 240 Hzfs = 1 kHzharmonic: 3f₁
fa = Hz

3Solutions

1.Number systems

Answer: U = 247

Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.

Invert and add one

9 = 0000 1001
inverted: 1111 0110
+1 → 1111 0111

Read it as unsigned

1111 0111₂ = 256 − 9 = 247

Answer

U = 247
2.Number systems

Answer: R = 49

Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.

Bit by bit

AND gives 1 only where both bits are 1.

0011 0011
AND 1011 0101
= 0011 0001

Value of the result

0011 0001₂ = 49

Answer

R = 49
3.Digital logic: gates, K-maps & flip-flops

Answer: AB = 00, CD = 11

Karnaugh maps: the cells are ordered in Gray code (00, 01, 11, 10), so neighbouring cells, including the ones across the edges, differ in exactly one variable. Group the 1s in rectangles of 1, 2, 4, 8 or 16 cells, as large as possible and as few as possible, until every 1 is covered. Each group is one product term: the variables that stay constant inside it. A group of 2ᵏ cells loses k variables. Don't-cares (X) may be used to make groups bigger but never have to be covered. Grouping the 0s instead gives the minimal POS form.

Neighbours of each 1

A 1 with a neighbouring 1 can join a group of two or more.

m3: m2, m1, m7, m11 → 0
ABCD0001111000011110111111

The isolated 1

m3 = A′B′CD → AB = 00, CD = 11

Answer

AB = 00, CD = 11
4.Digital logic: gates, K-maps & flip-flops

Answer: fout = 0.0625 kHz

Flip-flops and counters: a flip-flop changes only at the active clock edge. D copies its input (Q⁺ = D); T toggles when T = 1; JK holds for 00, resets for 01, sets for 10 and toggles for 11. An n-bit binary counter has 2ⁿ states and counts modulo 2ⁿ; a mod-N counter goes 0, 1, …, N − 1 and back to 0, and needs the smallest n with 2ⁿ ≥ N flip-flops. Each stage of a ripple counter halves the frequency, so the last output of a mod-N counter runs at fclk/N. A Johnson counter of n flip-flops has 2n states, a ring counter n.

Frequency division

fout = 1 kHz / 16 = 0.0625 kHz

Answer

fout = 0.0625 kHz
5.Data acquisition & sampling

Answer: RB = 240 B/s

UART: an asynchronous serial link sends each byte as a frame: one start bit (low), the data bits, an optional parity bit and one or two stop bits (high). The baud rate is the number of bits per second, so one bit lasts Tb = 1/baud and a frame of n bits lasts n/baud. The common 8N1 format has 10 bits per byte. The baud generator divides the clock: baud = fclk/(16·D) with a whole number D, so the real baud rate differs slightly from the target; an error below about 2 % is usually acceptable.

Bits per frame

1 + 8 + 0 + 1 = 10

Byte rate

2400/10 = 240 B/s

Answer

RB = 240 B/s
6.Data acquisition & sampling

Answer: fa = 280 Hz

Sampling: an ADC measures the signal fs times per second. By the Nyquist–Shannon theorem a frequency f is captured correctly only while f < fs/2, the Nyquist (folding) frequency, so the sampling rate must exceed twice the highest signal frequency. A higher frequency is not lost: it shows up as an alias at fa = |f − k·fs|, with the whole number k that brings the result between 0 and fs/2. The samples cannot tell the two apart, so an analogue anti-aliasing filter must remove everything above fs/2 before the ADC.

Harmonic frequency

3f₁ = 3·240 Hz = 720 Hz

Nearest multiple of the sampling rate

m = round(0.72) = 1

Alias frequency

fa = |720 − 1·1000| = 280 Hz

Answer

fa = 280 Hz

The alias lands inside the signal band, where no digital filter can remove it. Only an analogue filter before the ADC helps.

ExamProblems · examproblems.com/courses/digital-electronics