Number systems
- Place values
- binary 2k, octal 8k, hex 16k
- To decimal
- Σ dk·bk
- From decimal
- divide by the base, read the remainders bottom-up
- Hex ↔ binary
- one hex digit = 4 bits
- Two’s complement
- invert the bits and add 1
Digital Electronics: cram pack
Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
1Formulas and methods
Digital logic: gates, K-maps & flip-flops
- Basic gates
- A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
- Boolean rules
- X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
- De Morgan
- (X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
- Karnaugh map order
- 00, 01, 11, 10 (Gray code)
- Group of 2ᵏ cells
- loses k variables
- 4-to-1 multiplexer
- F = A′B′I0 + A′BI1 + AB′I2 + ABI3
- Flip-flops
- D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
- Counters
- n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
- Ripple counter
- fmax = 1/(n·tpd)
- Ring and Johnson counters
- n and 2n states
Method
- For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
- For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
- Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
- For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.
Data acquisition & sampling
- Nyquist criterion
- fs > 2·fmax, fN = fs/2
- Alias frequency
- fa = |f − k·fs|, k = round(f/fs)
- Step size
- 1 LSB = VFSR/2ᴺ
- Quantisation error (rounding)
- ±½ LSB
- Truncating ADC code
- D = ⌊Vin/LSB⌋
- Bits for a resolution r
- 2ᴺ ≥ span/r
- Ideal SQNR, full-scale sine
- SQNR = 6.02·N + 1.76 dB
- Data rate
- channels × fs × N bit/s
- Multiplexed ADC
- fs = 1/(n·(tc + tset))
- UART
- Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
- Baud rate divider
- baud = fclk/(16·D)
Method
- Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
- For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
- For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
- For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.
2Practice problems
1.Number systemsMedium
Write −11 as an 8-bit two's complement pattern. Read the pattern as an unsigned binary number: what is its value U in decimal?
N = −118 bit
U =
2.Number systemsHard
A system must give every one of 4900 items its own binary code of the same length. What is the smallest number of bits b needed?
4900
b = bit
3.Digital logic: gates, K-maps & flip-flopsMedium
Use the Karnaugh map to find the minimal sum-of-products (SOP) form of F(A, B, C) = Σm(1, 2, 4). How many literals L does it contain in total (a primed variable counts as one literal)?
F(A, B, C) = Σm(1, 2, 4)
L =
4.Digital logic: gates, K-maps & flip-flopsHard
A 3-bit binary down counter starts at 4 (decimal, Q = 100). Which count Q (in decimal) does it show after 24 clock pulses?
Q0 = 424n = 3
Q =
5.Data acquisition & samplingMedium
Find the ideal signal-to-quantisation-noise ratio SQNR of an 18-bit ADC for a full-scale sine wave.
N = 18
SQNR = dB
6.Data acquisition & samplingHard
A 12-bit ADC streams every sample over a UART at 115200 baud, format 8E1 (start bit, 8 data bits, even parity, 1 stop bit). Each sample is sent as 2 whole byte(s) and the link is busy all the time. Find the highest signal frequency fmax that can be sampled without aliasing, in Hz.
baud = 115200 BdN = 128E1
fmax = Hz
3Solutions
1.Number systems
Answer: U = 245
Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.
Invert and add one
11 = 0000 1011
inverted: 1111 0100
+1 → 1111 0101
Read it as unsigned
1111 0101₂ = 256 − 11 = 245
Answer
U = 245
2.Number systems
Answer: b = 13 bit
Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.
Powers of two
212 = 4096 < 4900
213 = 8192 ≥ 4900
Answer
b = 13
3.Digital logic: gates, K-maps & flip-flops
Answer: L = 9
Karnaugh maps: the cells are ordered in Gray code (00, 01, 11, 10), so neighbouring cells, including the ones across the edges, differ in exactly one variable. Group the 1s in rectangles of 1, 2, 4, 8 or 16 cells, as large as possible and as few as possible, until every 1 is covered. Each group is one product term: the variables that stay constant inside it. A group of 2ᵏ cells loses k variables. Don't-cares (X) may be used to make groups bigger but never have to be covered. Grouping the 0s instead gives the minimal POS form.
Group the 1s
Every group is a rectangle of 2ᵏ cells; edge cells are neighbours of the cells on the opposite edge.
A′B′C
A′BC′
AB′C′
Minimal SOP form
F = A′B′C + A′BC′ + AB′C′
L = 9
Answer
L = 9
4.Digital logic: gates, K-maps & flip-flops
Answer: Q = 4
Flip-flops and counters: a flip-flop changes only at the active clock edge. D copies its input (Q⁺ = D); T toggles when T = 1; JK holds for 00, resets for 01, sets for 10 and toggles for 11. An n-bit binary counter has 2ⁿ states and counts modulo 2ⁿ; a mod-N counter goes 0, 1, …, N − 1 and back to 0, and needs the smallest n with 2ⁿ ≥ N flip-flops. Each stage of a ripple counter halves the frequency, so the last output of a mod-N counter runs at fclk/N. A Johnson counter of n flip-flops has 2n states, a ring counter n.
Full cycles
Every 8 pulses bring the counter back to the same state.
24 = 3·8 + 0
Count after the remaining pulses
Q = (4 − 0) mod 8 = 4
Q = 100₂
Answer
Q = 4
5.Data acquisition & sampling
Answer: SQNR = 110.1 dB
ADC resolution: an N-bit converter divides its full-scale range VFSR into 2ᴺ codes, from 0 to 2ᴺ − 1. One step is 1 LSB = VFSR/2ᴺ: the smallest change the converter can show. A truncating ADC gives the code ⌊Vin/LSB⌋; a rounding ADC is never more than ½ LSB away from the true value, its quantisation error. Every extra bit halves the LSB and adds about 6 dB to the ideal signal-to-quantisation-noise ratio SQNR = 6.02·N + 1.76 dB for a full-scale sine. To reach a resolution r over a span, choose the smallest N with 2ᴺ ≥ span/r.
Ideal SQNR
SQNR = 6.02·18 + 1.76 = 110.1 dB
Answer
SQNR = 110.1 dB
6.Data acquisition & sampling
Answer: fmax = 2618 Hz
UART: an asynchronous serial link sends each byte as a frame: one start bit (low), the data bits, an optional parity bit and one or two stop bits (high). The baud rate is the number of bits per second, so one bit lasts Tb = 1/baud and a frame of n bits lasts n/baud. The common 8N1 format has 10 bits per byte. The baud generator divides the clock: baud = fclk/(16·D) with a whole number D, so the real baud rate differs slightly from the target; an error below about 2 % is usually acceptable.
Bits per sample on the line
2·11 = 22 bit
Highest sampling rate
fs,max = 115200/22 = 5236 Hz
Nyquist limit
fmax = 5236/2 = 2618 Hz
Answer
fmax = 2618 Hz
ExamProblems · examproblems.com/courses/digital-electronics