Digital Electronics: cram pack

Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Number systems

Place values
binary 2k, octal 8k, hex 16k
To decimal
Σ dk·bk
From decimal
divide by the base, read the remainders bottom-up
Hex ↔ binary
one hex digit = 4 bits
Two’s complement
invert the bits and add 1

Digital logic: gates, K-maps & flip-flops

Basic gates
A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
Boolean rules
X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
De Morgan
(X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
Karnaugh map order
00, 01, 11, 10 (Gray code)
Group of 2ᵏ cells
loses k variables
4-to-1 multiplexer
F = A′B′I0 + A′BI1 + AB′I2 + ABI3
Flip-flops
D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
Counters
n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
Ripple counter
fmax = 1/(n·tpd)
Ring and Johnson counters
n and 2n states

Method

  1. For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
  2. For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
  3. Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
  4. For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.

Data acquisition & sampling

Nyquist criterion
fs > 2·fmax, fN = fs/2
Alias frequency
fa = |f − k·fs|, k = round(f/fs)
Step size
1 LSB = VFSR/2ᴺ
Quantisation error (rounding)
±½ LSB
Truncating ADC code
D = ⌊Vin/LSB⌋
Bits for a resolution r
2ᴺ ≥ span/r
Ideal SQNR, full-scale sine
SQNR = 6.02·N + 1.76 dB
Data rate
channels × fs × N bit/s
Multiplexed ADC
fs = 1/(n·(tc + tset))
UART
Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
Baud rate divider
baud = fclk/(16·D)

Method

  1. Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
  2. For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
  3. For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
  4. For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.

2Practice problems

1.Number systemsMedium
8-bit two's complement?−128?64?32?16?8?4?2?1

Write −34 as an 8-bit two's complement pattern. Read the pattern as an unsigned binary number: what is its value U in decimal?

N = −348 bit
U =
2.Number systemsHard
32 bit1 px1280 px720 pxM = ? KiB

An uncompressed image is 1280 × 720 pixels with 32 bits per pixel. How much memory M does it take, in KiB (1 KiB = 1024 bytes)?

1280 × 720 px32 bit/px1 KiB = 1024 B
M = KiB
3.Digital logic: gates, K-maps & flip-flopsMedium
MUX1I0​C′I1​CI2​1I3​ABS1​S0​F

A 4-to-1 multiplexer has its select inputs S₁ = A and S₀ = B, and its data inputs tied to I₀ = 1, I₁ = C′, I₂ = C, I₃ = 1. For how many of the 8 combinations of A, B and C is the output F = 1? Find N.

I₀ = 1I₁ = C′I₂ = CI₃ = 1
N =
4.Digital logic: gates, K-maps & flip-flopsHard
CLKT12345678

A positive-edge-triggered T flip-flop starts with Q = 0 and receives the inputs shown. Click the first clock edge at which Q goes from 1 back to 0.

Q₀ = 0T
  1. 1clock edge 1
  2. 2clock edge 2
  3. 3clock edge 3
  4. 4clock edge 4
  5. 5clock edge 5
  6. 6clock edge 6
  7. 7clock edge 7
  8. 8clock edge 8
5.Data acquisition & samplingMedium
tTs​ = 1/fs​f = 6.5 kHzfs​ = 5 kHz

A 6.5 kHz sine wave is sampled at 5 kHz without an anti-aliasing filter. At which frequency fa does it appear in the samples? Give it in Hz.

f = 6.5 kHzfs = 5 kHz
fa = Hz
6.Data acquisition & samplingHard
SD0​D1​D2​D3​D4​D5​D6​D7​1/fbaud​8 MHz / (16·D)

A microcontroller with an 8 MHz clock sets its UART baud rate as fclk/(16·D), with D a whole number rounded to the nearest value. The target is 4800 baud. Find the percentage error of the real baud rate (positive when it is too fast).

fclk = 8 MHztarget = 4800 Bd
e = %

3Solutions

1.Number systems

Answer: U = 222

Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.

Invert and add one

34 = 0010 0010
inverted: 1101 1101
+1 → 1101 1110

Read it as unsigned

1101 1110₂ = 256 − 34 = 222

Answer

U = 222
2.Number systems

Answer: M = 3600 KiB

Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.

Bits and bytes

1280·720·32 = 29491200 bit = 3686400 B

Convert to KiB

3686400/1024 = 3600 KiB

Answer

M = 3600 KiB
3.Digital logic: gates, K-maps & flip-flops

Answer: N = 6

Multiplexer: a 2ⁿ-to-1 multiplexer passes one of its data inputs to the output; the select lines, read as a binary number, pick which one. For a 4-to-1 MUX with selects S₁S₀ = AB, F = A′B′·I₀ + A′B·I₁ + AB′·I₂ + AB·I₃. Tying the data inputs to 0, 1, C or C′ makes the MUX produce any function of A, B and C, which is a common way to build logic with one chip.

Output expression

F = A′B′ + A′BC′ + AB′C + AB

Rows with F = 1

ABC = 000, 001, 010, 101, 110, 111
N = 6

Answer

N = 6
4.Digital logic: gates, K-maps & flip-flops

Answer: clock edge 5

Flip-flops and counters: a flip-flop changes only at the active clock edge. D copies its input (Q⁺ = D); T toggles when T = 1; JK holds for 00, resets for 01, sets for 10 and toggles for 11. An n-bit binary counter has 2ⁿ states and counts modulo 2ⁿ; a mod-N counter goes 0, 1, …, N − 1 and back to 0, and needs the smallest n with 2ⁿ ≥ N flip-flops. Each stage of a ripple counter halves the frequency, so the last output of a mod-N counter runs at fclk/N. A Johnson counter of n flip-flops has 2n states, a ring counter n.

Q after every edge

A T flip-flop toggles at each rising edge with T = 1 and holds with T = 0.

1: T = 0 → Q = 0
2: T = 1 → Q = 1
3: T = 0 → Q = 1
4: T = 0 → Q = 1
5: T = 1 → Q = 0
6: T = 1 → Q = 1
7: T = 0 → Q = 1
8: T = 1 → Q = 0

First change from 1 to 0

clock edge 5

Answer

clock edge 5
5.Data acquisition & sampling

Answer: fa = 1500 Hz

Sampling: an ADC measures the signal fs times per second. By the Nyquist–Shannon theorem a frequency f is captured correctly only while f < fs/2, the Nyquist (folding) frequency, so the sampling rate must exceed twice the highest signal frequency. A higher frequency is not lost: it shows up as an alias at fa = |f − k·fs|, with the whole number k that brings the result between 0 and fs/2. The samples cannot tell the two apart, so an analogue anti-aliasing filter must remove everything above fs/2 before the ADC.

Nyquist frequency

fs/2 = 2.5 kHz < f = 6.5 kHz

Nearest multiple of the sampling rate

k = round(6500/5000) = 1

Alias frequency

fa = |6500 − 1·5000| = 1500 Hz

Answer

fa = 1500 Hz

The dashed curve in the figure is the alias: it passes through exactly the same samples.

6.Data acquisition & sampling

Answer: e = 0.1603 %

UART: an asynchronous serial link sends each byte as a frame: one start bit (low), the data bits, an optional parity bit and one or two stop bits (high). The baud rate is the number of bits per second, so one bit lasts Tb = 1/baud and a frame of n bits lasts n/baud. The common 8N1 format has 10 bits per byte. The baud generator divides the clock: baud = fclk/(16·D) with a whole number D, so the real baud rate differs slightly from the target; an error below about 2 % is usually acceptable.

Divider

D = 8·10⁶/(16·4800) = 104.2 → 104

Real baud rate

8·10⁶/(16·104) = 4808 Bd

Error

(4808 − 4800)/4800·100 = 0.1603 %

Answer

e = 0.1603 %

An error below about 2 % is usually acceptable.

ExamProblems · examproblems.com/courses/digital-electronics