Digital Electronics: cram pack

Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Number systems

Place values
binary 2k, octal 8k, hex 16k
To decimal
Σ dk·bk
From decimal
divide by the base, read the remainders bottom-up
Hex ↔ binary
one hex digit = 4 bits
Two’s complement
invert the bits and add 1

Digital logic: gates, K-maps & flip-flops

Basic gates
A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
Boolean rules
X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
De Morgan
(X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
Karnaugh map order
00, 01, 11, 10 (Gray code)
Group of 2ᵏ cells
loses k variables
4-to-1 multiplexer
F = A′B′I0 + A′BI1 + AB′I2 + ABI3
Flip-flops
D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
Counters
n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
Ripple counter
fmax = 1/(n·tpd)
Ring and Johnson counters
n and 2n states

Method

  1. For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
  2. For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
  3. Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
  4. For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.

Data acquisition & sampling

Nyquist criterion
fs > 2·fmax, fN = fs/2
Alias frequency
fa = |f − k·fs|, k = round(f/fs)
Step size
1 LSB = VFSR/2ᴺ
Quantisation error (rounding)
±½ LSB
Truncating ADC code
D = ⌊Vin/LSB⌋
Bits for a resolution r
2ᴺ ≥ span/r
Ideal SQNR, full-scale sine
SQNR = 6.02·N + 1.76 dB
Data rate
channels × fs × N bit/s
Multiplexed ADC
fs = 1/(n·(tc + tset))
UART
Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
Baud rate divider
baud = fclk/(16·D)

Method

  1. Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
  2. For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
  3. For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
  4. For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.

2Practice problems

1.Number systemsMedium
8-bit two's complement?−128?64?32?16?8?4?2?1

Write −24 as an 8-bit two's complement pattern. Read the pattern as an unsigned binary number: what is its value U in decimal?

N = −248 bit
U =
2.Number systemsHard
click the bits to set them012806403201608040201

Set the bits to the 8-bit result of 0110 1101 >> 2. What is the result's value R in decimal?

0110 1101>> 2
R =
3.Digital logic: gates, K-maps & flip-flopsMedium
MUXC′I0​0I1​CI2​CI3​ABS1​S0​F

A 4-to-1 multiplexer has its select inputs S₁ = A and S₀ = B, and its data inputs tied to I₀ = C′, I₁ = 0, I₂ = C, I₃ = C. For how many of the 8 combinations of A, B and C is the output F = 1? Find N.

I₀ = C′I₁ = 0I₂ = CI₃ = C
N =
4.Digital logic: gates, K-maps & flip-flopsHard
CLKJK1234567

A positive-edge-triggered JK flip-flop starts with Q = 0 and receives the inputs shown. Click the first clock edge at which Q goes from 1 back to 0.

Q₀ = 0JK
  1. 1clock edge 1
  2. 2clock edge 2
  3. 3clock edge 3
  4. 4clock edge 4
  5. 5clock edge 5
  6. 6clock edge 6
  7. 7clock edge 7
5.Data acquisition & samplingMedium
Vin​N = 18VFSR​2ᴺ − 101 LSB

Find the ideal signal-to-quantisation-noise ratio SQNR of an 18-bit ADC for a full-scale sine wave.

N = 18
SQNR = dB
6.Data acquisition & samplingHard
f0fs​/2fs​2fs​3fs​9 kHz7f₁?

A 9 kHz square wave is sampled at 20 kHz with no anti-aliasing filter. A square wave contains the odd harmonics 3f₁, 5f₁, 7f₁, … At which frequency fa does its harmonic 7f₁ appear in the sampled data? Give it in kHz.

f₁ = 9 kHzfs = 20 kHzharmonic: 7f₁
fa = kHz

3Solutions

1.Number systems

Answer: U = 232

Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.

Invert and add one

24 = 0001 1000
inverted: 1110 0111
+1 → 1110 1000

Read it as unsigned

1110 1000₂ = 256 − 24 = 232

Answer

U = 232
2.Number systems

Answer: R = 27

Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.

Bit by bit

Shifting right by 2 moves every bit 2 places to the right; bits that fall off the right end are lost and zeros come in on the left.

0110 1101 >> 2
= 0001 1011

Value of the result

0001 1011₂ = 27

Answer

R = 27
3.Digital logic: gates, K-maps & flip-flops

Answer: N = 3

Multiplexer: a 2ⁿ-to-1 multiplexer passes one of its data inputs to the output; the select lines, read as a binary number, pick which one. For a 4-to-1 MUX with selects S₁S₀ = AB, F = A′B′·I₀ + A′B·I₁ + AB′·I₂ + AB·I₃. Tying the data inputs to 0, 1, C or C′ makes the MUX produce any function of A, B and C, which is a common way to build logic with one chip.

Output expression

F = A′B′C′ + AB′C + ABC

Rows with F = 1

ABC = 000, 101, 111
N = 3

Answer

N = 3
4.Digital logic: gates, K-maps & flip-flops

Answer: clock edge 3

Flip-flops and counters: a flip-flop changes only at the active clock edge. D copies its input (Q⁺ = D); T toggles when T = 1; JK holds for 00, resets for 01, sets for 10 and toggles for 11. An n-bit binary counter has 2ⁿ states and counts modulo 2ⁿ; a mod-N counter goes 0, 1, …, N − 1 and back to 0, and needs the smallest n with 2ⁿ ≥ N flip-flops. Each stage of a ripple counter halves the frequency, so the last output of a mod-N counter runs at fclk/N. A Johnson counter of n flip-flops has 2n states, a ring counter n.

Q after every edge

A JK flip-flop: 00 holds, 01 resets (Q = 0), 10 sets (Q = 1), 11 toggles.

1: J = 1, K = 1 → Q = 1
2: J = 1, K = 0 → Q = 1
3: J = 0, K = 1 → Q = 0
4: J = 1, K = 0 → Q = 1
5: J = 1, K = 0 → Q = 1
6: J = 0, K = 0 → Q = 1
7: J = 1, K = 0 → Q = 1

First change from 1 to 0

clock edge 3

Answer

clock edge 3
5.Data acquisition & sampling

Answer: SQNR = 110.1 dB

ADC resolution: an N-bit converter divides its full-scale range VFSR into 2ᴺ codes, from 0 to 2ᴺ − 1. One step is 1 LSB = VFSR/2ᴺ: the smallest change the converter can show. A truncating ADC gives the code ⌊Vin/LSB⌋; a rounding ADC is never more than ½ LSB away from the true value, its quantisation error. Every extra bit halves the LSB and adds about 6 dB to the ideal signal-to-quantisation-noise ratio SQNR = 6.02·N + 1.76 dB for a full-scale sine. To reach a resolution r over a span, choose the smallest N with 2ᴺ ≥ span/r.

Ideal SQNR

SQNR = 6.02·18 + 1.76 = 110.1 dB

Answer

SQNR = 110.1 dB
6.Data acquisition & sampling

Answer: fa = 3 kHz

Sampling: an ADC measures the signal fs times per second. By the Nyquist–Shannon theorem a frequency f is captured correctly only while f < fs/2, the Nyquist (folding) frequency, so the sampling rate must exceed twice the highest signal frequency. A higher frequency is not lost: it shows up as an alias at fa = |f − k·fs|, with the whole number k that brings the result between 0 and fs/2. The samples cannot tell the two apart, so an analogue anti-aliasing filter must remove everything above fs/2 before the ADC.

Harmonic frequency

7f₁ = 7·9 kHz = 63 kHz

Nearest multiple of the sampling rate

m = round(3.15) = 3

Alias frequency

fa = |63 − 3·20| = 3 kHz

Answer

fa = 3 kHz

The alias lands inside the signal band, where no digital filter can remove it. Only an analogue filter before the ADC helps.

ExamProblems · examproblems.com/courses/digital-electronics