Number systems
- Place values
- binary 2k, octal 8k, hex 16k
- To decimal
- Σ dk·bk
- From decimal
- divide by the base, read the remainders bottom-up
- Hex ↔ binary
- one hex digit = 4 bits
- Two’s complement
- invert the bits and add 1
Digital Electronics: cram pack
Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
1Formulas and methods
Digital logic: gates, K-maps & flip-flops
- Basic gates
- A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
- Boolean rules
- X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
- De Morgan
- (X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
- Karnaugh map order
- 00, 01, 11, 10 (Gray code)
- Group of 2ᵏ cells
- loses k variables
- 4-to-1 multiplexer
- F = A′B′I0 + A′BI1 + AB′I2 + ABI3
- Flip-flops
- D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
- Counters
- n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
- Ripple counter
- fmax = 1/(n·tpd)
- Ring and Johnson counters
- n and 2n states
Method
- For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
- For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
- Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
- For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.
Data acquisition & sampling
- Nyquist criterion
- fs > 2·fmax, fN = fs/2
- Alias frequency
- fa = |f − k·fs|, k = round(f/fs)
- Step size
- 1 LSB = VFSR/2ᴺ
- Quantisation error (rounding)
- ±½ LSB
- Truncating ADC code
- D = ⌊Vin/LSB⌋
- Bits for a resolution r
- 2ᴺ ≥ span/r
- Ideal SQNR, full-scale sine
- SQNR = 6.02·N + 1.76 dB
- Data rate
- channels × fs × N bit/s
- Multiplexed ADC
- fs = 1/(n·(tc + tset))
- UART
- Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
- Baud rate divider
- baud = fclk/(16·D)
Method
- Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
- For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
- For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
- For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.
2Practice problems
1.Number systemsMedium
Write −77 as an 8-bit two's complement pattern. Read the pattern as an unsigned binary number: what is its value U in decimal?
N = −778 bit
U =
2.Number systemsHard
Set the bits to the 8-bit result of 1010 1010 >> 2. What is the result's value R in decimal?
1010 1010>> 2
R =
3.Digital logic: gates, K-maps & flip-flopsMedium
Simplify F = B′C + A′B′C + ABC′ + AC to its minimal sum-of-products form. How many literals L does the simplified expression contain?
F = B′C + A′B′C + ABC′ + AC
L =
4.Digital logic: gates, K-maps & flip-flopsHard
A synchronous mod-12 counter counts 0, 1, …, 11 and then returns to 0. It starts at 6. Which count Q (in decimal) does it show after 32 clock pulses?
Q0 = 632N = 12
Q =
5.Data acquisition & samplingMedium
A 5.2 kHz sine wave is sampled at 4 kHz without an anti-aliasing filter. At which frequency fa does it appear in the samples? Give it in Hz.
f = 5.2 kHzfs = 4 kHz
fa = Hz
6.Data acquisition & samplingHard
A temperature sensor gives 1 mV/°C (0 V at 0 °C). Its signal is amplified 4 times and fed to a 10-bit ADC with a range of 0 to 10 V (1 LSB = VFSR/2ᴺ). Find the temperature change ΔTLSB that corresponds to one LSB.
S = 1 mV/°CG = 4N = 10VFSR = 10 V
ΔTLSB = °C
3Solutions
1.Number systems
Answer: U = 179
Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.
Invert and add one
77 = 0100 1101
inverted: 1011 0010
+1 → 1011 0011
Read it as unsigned
1011 0011₂ = 256 − 77 = 179
Answer
U = 179
2.Number systems
Answer: R = 42
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Bit by bit
Shifting right by 2 moves every bit 2 places to the right; bits that fall off the right end are lost and zeros come in on the left.
1010 1010 >> 2
= 0010 1010
Value of the result
0010 1010₂ = 42
Answer
R = 42
3.Digital logic: gates, K-maps & flip-flops
Answer: L = 4
Boolean algebra: the rules that simplify expressions are X + X′ = 1 and X·X′ = 0, X + X = X, absorption X + X·Y = X, the combining rule X·Y + X·Y′ = X, X + X′Y = X + Y and the consensus theorem XY + X′Z + YZ = XY + X′Z. De Morgan's laws turn (X·Y)′ into X′ + Y′ and (X + Y)′ into X′·Y′. A Karnaugh map applies these rules graphically: every group of two neighbouring cells is one use of XY + XY′ = X.
Minterms of the expression
B′C → m(1, 5)
A′B′C → m(1)
ABC′ → m(6)
AC → m(5, 7)
Group and read off
F = B′C + AB
Count the literals
L = 4
Answer
L = 4
4.Digital logic: gates, K-maps & flip-flops
Answer: Q = 2
Flip-flops and counters: a flip-flop changes only at the active clock edge. D copies its input (Q⁺ = D); T toggles when T = 1; JK holds for 00, resets for 01, sets for 10 and toggles for 11. An n-bit binary counter has 2ⁿ states and counts modulo 2ⁿ; a mod-N counter goes 0, 1, …, N − 1 and back to 0, and needs the smallest n with 2ⁿ ≥ N flip-flops. Each stage of a ripple counter halves the frequency, so the last output of a mod-N counter runs at fclk/N. A Johnson counter of n flip-flops has 2n states, a ring counter n.
Full cycles
Every 12 pulses bring the counter back to the same state.
32 = 2·12 + 8
Count after the remaining pulses
Q = (6 + 8) mod 12 = 2
Q = 0010₂
Answer
Q = 2
5.Data acquisition & sampling
Answer: fa = 1200 Hz
Sampling: an ADC measures the signal fs times per second. By the Nyquist–Shannon theorem a frequency f is captured correctly only while f < fs/2, the Nyquist (folding) frequency, so the sampling rate must exceed twice the highest signal frequency. A higher frequency is not lost: it shows up as an alias at fa = |f − k·fs|, with the whole number k that brings the result between 0 and fs/2. The samples cannot tell the two apart, so an analogue anti-aliasing filter must remove everything above fs/2 before the ADC.
Nyquist frequency
fs/2 = 2 kHz < f = 5.2 kHz
Nearest multiple of the sampling rate
k = round(5200/4000) = 1
Alias frequency
fa = |5200 − 1·4000| = 1200 Hz
Answer
fa = 1200 Hz
The dashed curve in the figure is the alias: it passes through exactly the same samples.
6.Data acquisition & sampling
Answer: ΔTLSB = 2.441 °C
ADC resolution: an N-bit converter divides its full-scale range VFSR into 2ᴺ codes, from 0 to 2ᴺ − 1. One step is 1 LSB = VFSR/2ᴺ: the smallest change the converter can show. A truncating ADC gives the code ⌊Vin/LSB⌋; a rounding ADC is never more than ½ LSB away from the true value, its quantisation error. Every extra bit halves the LSB and adds about 6 dB to the ideal signal-to-quantisation-noise ratio SQNR = 6.02·N + 1.76 dB for a full-scale sine. To reach a resolution r over a span, choose the smallest N with 2ᴺ ≥ span/r.
Step size
1 LSB = 10000/1024 = 9.766 mV
Sensitivity at the ADC
1·4 = 4 mV/°C
Temperature resolution
ΔTLSB = 9.766/4 = 2.441 °C
Answer
ΔTLSB = 2.441 °C
The ADC reaches full scale at 2500 °C.
ExamProblems · examproblems.com/courses/digital-electronics