Digital Electronics: cram pack

Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Number systems

Place values
binary 2k, octal 8k, hex 16k
To decimal
Σ dk·bk
From decimal
divide by the base, read the remainders bottom-up
Hex ↔ binary
one hex digit = 4 bits
Two’s complement
invert the bits and add 1

Digital logic: gates, K-maps & flip-flops

Basic gates
A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
Boolean rules
X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
De Morgan
(X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
Karnaugh map order
00, 01, 11, 10 (Gray code)
Group of 2ᵏ cells
loses k variables
4-to-1 multiplexer
F = A′B′I0 + A′BI1 + AB′I2 + ABI3
Flip-flops
D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
Counters
n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
Ripple counter
fmax = 1/(n·tpd)
Ring and Johnson counters
n and 2n states

Method

  1. For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
  2. For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
  3. Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
  4. For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.

Data acquisition & sampling

Nyquist criterion
fs > 2·fmax, fN = fs/2
Alias frequency
fa = |f − k·fs|, k = round(f/fs)
Step size
1 LSB = VFSR/2ᴺ
Quantisation error (rounding)
±½ LSB
Truncating ADC code
D = ⌊Vin/LSB⌋
Bits for a resolution r
2ᴺ ≥ span/r
Ideal SQNR, full-scale sine
SQNR = 6.02·N + 1.76 dB
Data rate
channels × fs × N bit/s
Multiplexed ADC
fs = 1/(n·(tc + tset))
UART
Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
Baud rate divider
baud = fclk/(16·D)

Method

  1. Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
  2. For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
  3. For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
  4. For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.

2Practice problems

1.Number systemsMedium
8-bit two's complement?−128?64?32?16?8?4?2?1

Write −116 as an 8-bit two's complement pattern. Read the pattern as an unsigned binary number: what is its value U in decimal?

N = −1168 bit
U =
2.Number systemsHard
click the bits to set them012806403201608040201

Set the bits to the 8-bit result of 1110 1110 AND 0001 0110. What is the result's value R in decimal?

1110 1110AND0001 0110
R =
3.Digital logic: gates, K-maps & flip-flopsMedium
ABCD000111100001111011111

In this Karnaugh map exactly one 1 has no neighbouring 1, so it stays a group of one cell (a full minterm of four literals) in the minimal SOP form. Neighbours across the map edges count. Click that cell.

F = Σm(0, 3, 8, 12, 14)
  1. 1AB = 00, CD = 00
  2. 2AB = 00, CD = 01
  3. 3AB = 00, CD = 11
  4. 4AB = 00, CD = 10
  5. 5AB = 01, CD = 00
  6. 6AB = 01, CD = 01
  7. 7AB = 01, CD = 11
  8. 8AB = 01, CD = 10
  9. 9AB = 11, CD = 00
  10. 10AB = 11, CD = 01
  11. 11AB = 11, CD = 11
  12. 12AB = 11, CD = 10
  13. 13AB = 10, CD = 00
  14. 14AB = 10, CD = 01
  15. 15AB = 10, CD = 11
  16. 16AB = 10, CD = 10
4.Digital logic: gates, K-maps & flip-flopsHard
ABCD0001111000011110000103020415170611201301511418X9011X10

Find the minimal SOP form of F(A, B, C, D) = Σm(5, 7, 8, 12, 14) + d(9, 10), where d marks the don't-care conditions. How many literals L does it contain?

F(A, B, C, D) = Σm(5, 7, 8, 12, 14) + d(9, 10)
L =
5.Data acquisition & samplingMedium
tTs​ = 1/fs​f = 8 kHzfs​ = 5 kHz

An 8 kHz sine wave is sampled at 5 kHz without an anti-aliasing filter. At which frequency fa does it appear in the samples? Give it in Hz.

f = 8 kHzfs = 5 kHz
fa = Hz
6.Data acquisition & samplingHard
SD0​D1​D2​D3​D4​D5​D6​D7​Tb​10·Tb​19200 Bd, 8N1

A 16-bit ADC streams every sample over a UART at 19200 baud, format 8N1 (start bit, 8 data bits, 1 stop bit). Each sample is sent as 2 whole byte(s) and the link is busy all the time. Find the highest signal frequency fmax that can be sampled without aliasing, in Hz.

baud = 19200 BdN = 168N1
fmax = Hz

3Solutions

1.Number systems

Answer: U = 140

Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.

Invert and add one

116 = 0111 0100
inverted: 1000 1011
+1 → 1000 1100

Read it as unsigned

1000 1100₂ = 256 − 116 = 140

Answer

U = 140
2.Number systems

Answer: R = 6

Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.

Bit by bit

AND gives 1 only where both bits are 1.

1110 1110
AND 0001 0110
= 0000 0110

Value of the result

0000 0110₂ = 6

Answer

R = 6
3.Digital logic: gates, K-maps & flip-flops

Answer: AB = 00, CD = 11

Karnaugh maps: the cells are ordered in Gray code (00, 01, 11, 10), so neighbouring cells, including the ones across the edges, differ in exactly one variable. Group the 1s in rectangles of 1, 2, 4, 8 or 16 cells, as large as possible and as few as possible, until every 1 is covered. Each group is one product term: the variables that stay constant inside it. A group of 2ᵏ cells loses k variables. Don't-cares (X) may be used to make groups bigger but never have to be covered. Grouping the 0s instead gives the minimal POS form.

Neighbours of each 1

A 1 with a neighbouring 1 can join a group of two or more.

m3: m2, m1, m7, m11 → 0
ABCD000111100001111011111

The isolated 1

m3 = A′B′CD → AB = 00, CD = 11

Answer

AB = 00, CD = 11
4.Digital logic: gates, K-maps & flip-flops

Answer: L = 5

Karnaugh maps: the cells are ordered in Gray code (00, 01, 11, 10), so neighbouring cells, including the ones across the edges, differ in exactly one variable. Group the 1s in rectangles of 1, 2, 4, 8 or 16 cells, as large as possible and as few as possible, until every 1 is covered. Each group is one product term: the variables that stay constant inside it. A group of 2ᵏ cells loses k variables. Don't-cares (X) may be used to make groups bigger but never have to be covered. Grouping the 0s instead gives the minimal POS form.

Prime implicants

The largest groups that can be formed from 1s and Xs.

AD′, A′BD, AB′C′
ABCD0001111000011110000103020415170611201301511418X9011X10

Minimal cover

F = AD′ + A′BD
L = 5

Answer

L = 5
5.Data acquisition & sampling

Answer: fa = 2000 Hz

Sampling: an ADC measures the signal fs times per second. By the Nyquist–Shannon theorem a frequency f is captured correctly only while f < fs/2, the Nyquist (folding) frequency, so the sampling rate must exceed twice the highest signal frequency. A higher frequency is not lost: it shows up as an alias at fa = |f − k·fs|, with the whole number k that brings the result between 0 and fs/2. The samples cannot tell the two apart, so an analogue anti-aliasing filter must remove everything above fs/2 before the ADC.

Nyquist frequency

fs/2 = 2.5 kHz < f = 8 kHz

Nearest multiple of the sampling rate

k = round(8000/5000) = 2

Alias frequency

fa = |8000 − 2·5000| = 2000 Hz

Answer

fa = 2000 Hz

The dashed curve in the figure is the alias: it passes through exactly the same samples.

6.Data acquisition & sampling

Answer: fmax = 480 Hz

UART: an asynchronous serial link sends each byte as a frame: one start bit (low), the data bits, an optional parity bit and one or two stop bits (high). The baud rate is the number of bits per second, so one bit lasts Tb = 1/baud and a frame of n bits lasts n/baud. The common 8N1 format has 10 bits per byte. The baud generator divides the clock: baud = fclk/(16·D) with a whole number D, so the real baud rate differs slightly from the target; an error below about 2 % is usually acceptable.

Bits per sample on the line

2·10 = 20 bit

Highest sampling rate

fs,max = 19200/20 = 960 Hz

Nyquist limit

fmax = 960/2 = 480 Hz

Answer

fmax = 480 Hz

ExamProblems · examproblems.com/courses/digital-electronics